• Smart Structures and Systems
• /
• 제22권1호
• /
• pp.71-79
• /
• 2018

The nonlinear vibration analysis of a magneto-rheological elastomer (MRE) sandwich plate is conducted experimentally. Experiments have been performed in order to construct the frequency-response curves in the vicinity of the fundamental natural frequency of an MRE sandwich plate (plate A) in either the absence or presence of a localised external magnetic field at 3 different geometrical locations, for both small and medium magnetic fields. Furthermore, experiments have also been conducted on a pure aluminium plate (plate B) with an equal thickness to the MRE sandwich plate (plate A) in order to examine the influence of the MRE layer on the nonlinear dynamics of the system. An electrodynamic shaker was used to directly force each system and the displacement at the centre of the plate was measured. Meanwhile, permanent magnets were used to apply a localised magnetic field for the experiments where the MRE sandwich plate was subject to an external magnetic field. It was observed all the MRE systems displayed strong hardening-type nonlinear behaviour, however, with increasing magnetic field this behaviour transitioned to a weak hardening-type nonlinearity.

• 한국음향학회지
• /
• 제10권1호
• /
• pp.30-36
• /
• 1991

음향 재질의 복소수 모듈러스(Complex Young's modulus)는 정적하중하에서 주파수에 따라 변하므로 재질의 동특성 규명을 위해 손실을 가지는 rod로 모델링 된 원통형 시편을 사용, 한쪽 끝은 가진기로 축방향 조화가진을 하고, 타단에서는 부가 질량체를 부착시켜 이의 전달 함수를 구한다. 전달 함수 방법은 축방향으로 가진된 rod로 모델링하여 가진기의 주파수 범위인 50~20000Hz에서 이론 및 실험적으로 해석된다. 또한 발생가능한 오차의 원인을 규명하고자 시편이가지는 포아송비(Poisson's ratio)에 기인한 측면운동, 끝단효과(End Effect), 손실계수가 작은 경우의 측정오차 및 시편 끝단의 접착제 효과를 분석하였으며 형상계수의 도입에 의해 측면운동에 의한 오차를 보상하였다.

• 비파괴검사학회지
• /
• 제31권6호
• /
• pp.601-608
• /
• 2011

This paper presents the damage assessment of a building structure by using a novel optical fiber accelerometer system. Especially, a sub-scaled building model is designed and manufactured to check up the feasibility of the optical fiber accelerometer for structural health monitoring. The novel accelerometer exploits the moir$\acute{e}$ fringe optical phenomenon and two pairs of optical fibers to measure the displacement with a high accuracy, and furthermore a pendulum to convert the displacement into acceleration. A prototype of optical fiber accelerometer system has been successfully developed that consists of a sensor head, a control unit and a signal processing unit. The building model is also designed as a 4-story building with a rectangular shape of $200{\times}300$ mm of edges. Each floor is connected to the next ones by 6 steel columns which are threaded rods. Basically, a random vibration test of the building model is done with a shaker and all of acceleration data is successfully measured at the assigned points by the optical fiber accelerometer. The experiments are repeated in the undamaged state and the damaged state. The comparison of dynamic parameters including the natural frequencies and the eigenvectors is successfully carried out. Finally, the optical fiber accelerometer is proven to be prospective to evaluate dynamic characteristics of a building structure for the damage assessment.

• Earthquakes and Structures
• /
• 제8권4호
• /
• pp.843-857
• /
• 2015

System identification is regarded as the most basic technique for structural health monitoring to evaluate structural integrity. Although many system identification techniques extracting mode information (e.g., mode frequency and mode shape) have been proposed so far, it is also desired to identify physical parameters (e.g., stiffness and damping). As for high-rise buildings subjected to long-period ground motions, system identification for evaluating only the shear stiffness based on a shear model does not seem to be an appropriate solution to the system identification problem due to the influence of overall bending response. In this paper, a system identification algorithm using a shear-bending model developed in the previous paper is revised to identify both shear and bending stiffnesses. In this algorithm, an ARX (Auto-Regressive eXogenous) model corresponding to the transfer function for interstory accelerations is applied for identifying physical parameters. For the experimental verification of the proposed system identification framework, vibration tests for a 3-story steel mini-structure are conducted. The test structure is specifically designed to measure horizontal accelerations including both shear and bending responses. In order to obtain reliable results, system identification theories for two different inputs are investigated; (a) base input motion by a modal shaker, (b) unknown forced input on the top floor.

• 한국정밀공학회지
• /
• 제29권10호
• /
• pp.1101-1109
• /
• 2012

Accelerometers play a key role in the structural assessment. However, the current electric type accelerometers have certain limitations to apply some structures such as heavy cabling labor, installed sea structure and sensitivity to electromagnetic fields. An optical Fiber Bragg Grating (FBG) accelerometer has many advantages over conventional electrical sensors since their immunity to electromagnetic interference and their capability to transmit signals over long distance without any additional amplifiers, and there is no corrosion from sea water. In this paper, we have developed a new FBG-based accelerometer. The accelerometer consists of two cantilevered type beams and a mass and two rollers. A bragg grating element is not directly glued to a cantilever to avoid possible non-uniform strain in the element. Instead, the bragg grating element will be attached to rotation part that rolled inducing vertical movement of the mass and support cantilever beams so that the bragg grating element is uniformly tensioned to achieve a constant strain distribution. After manufacturing, we will prove the performance and the natural frequency of the accelerometer through the experiment with a vibration shaker. The FBG-based accelerometer is developed for measuring the vibration not exceeding 50 Hz for the marine and civil structures.

• 한국전산구조공학회논문집
• /
• 제30권1호
• /
• pp.39-46
• /
• 2017

본 논문에서는 반응표면법과 다목적최적화 기법을 이용한 유한요소모델개선기법의 절차를 제안하고 이를 저층의 철근콘크리트건물의 모델개선에 적용하였다. 대상건물은 전단벽 신설 및 댐퍼부착을 위한 부재의 강재보강을 통해 내진보강이 이루어진 건물로서 보강전후에 소형 가진기를 이용한 진동실험을 실시하여 동특성을 구하였다. 대상건물의 개선에 사용된 변수는 기존콘크리트, 신규타설된 콘크리트, 조적의 탄성계수, 신축줄눈부의 스프링계수, 강재보강된 부재의 유효강성비이다. 보강전후 건물의 초기모델을 구축한 후 중심합성법에 따라 개선변수의 값을 변화시키면서 얻은 해석결과를 통해 고유진동수의 오차와 모드형상의 오차를 나타내는 2개의 반응함수를 구하고, 이를 다목적최적화의 목적함수로 사용하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1997년도 제9회 학술강연회논문집
• /
• pp.33-34
• /
• 1997

장비나 부품이 비행 또는 수송 등 실제상황에서 겪게되는 진동환경에 얼마만큼 견디는지 여부를 확인하고, 예상되는 동적 하중에 의한 성능저하나 오 동작이 일어나지 알는지 확인하기 위해 환경진동시험(environmental vibration test)이 수행된다. 이러한 환경진동시험의 경우에는 대형(대용량)의 진동시험기(shaker 또는 exciter)가 이용되며 진동시험기로부터 에너지를 시험물에 기계적으로 전달시켜줄 수 있는 진동 시험치구(이하, "치구(fixture)")가 필요하게 된다. 따라서 치구의 설계문제가 대두되며, 환경진동시험의 성공여부를 좌우하는데 대단히 중요한 역할을 하게 된다. 치구의 설계시 가장 중요한 점은 시험규격에 정해진 기준스펙트럼(specified reference spectrum)이 치구 위에 설치될 여러 시험물부착점들에 그대로 전달될 수 있는 강체치구(rigid fixture)를 설계하는 것이 가장 이상적이지만 치구의 공진 및 반공진 특성으로 인해 시험물부착점들 마다 스펙트럼이 달라지게 된다. 따라서 시험물은 과대시험(overtest) 또는/그리고 과소시험(undertest)를 겪게된다.최근의 진동시험제어 기법으로서는 다채널시스템을 이용한 여러 시험부착점들에서의 진동레벨의 평균을 제어하는 평균제어기법(average control technique)이 이용되므로서 시험주파수 범위에서 공진진동수(resonance frequency)들은 기준스펙트럼과 동일하게 제어가 가능하나 반공진 진동수(antiresonance frequency)들에서는 반공진 진동수들이 갖는 물리적 특성으로 인해 기준스펙트럼과 동일하게 제어가 이루어지지 않으므로시험규격에 정해진 정확한 진동시험이 수행되지 못하게된다.본 연구에서는 치구의 설계단계에서 치구 위의 여러 시험물 부착점들- 평균제어점(average control points)- 에서의 반공진 진동수들을 고려하여 그 감도를 게산하고, 치구의 구조변경을 수행하여 시험물 부착점들에서의 반공진 진동수를 일치시키므로서 종래의 진동시험제어시 나타나는 반공진진동수에서의 문제점을 제거할 수 있고, 그 결과 시험물 부착점들에서의 스펙트럼이 시험규격에 정해진 스펙트럼대로 진동시험이 수행될 수 있게 하는데 있다.

• Steel and Composite Structures
• /
• 제48권1호
• /
• pp.19-25
• /
• 2023

Due to high application of concrete structures in construction industry, however, the quality improvement is essential. One of the new ways for this purpose is adding the nanoparticles to the concrete. In this work, vibration analysis of concrete beams reinforced by graphene oxide (GO) nanoparticles based on mathematical model has been investigated. For the accuracy of the presented model, the experimental study is done for comparing the compressive strength. Since the nanoparticles can not be solved in water without any specific process, at the first, GO nanoparticles should be dispersed in water by using shaker, magnetic striker, ultrasonic devices and finally mechanical mixer. For modelling of the strucuture, sinusoidal shear deformation beam theory (SSDBT) is utilized. Mori-Tanak model model is utilized for obtaining the effective properties of the beam including agglomeration influences. Utilizing the energy method and Hamilton's principal, the motion equations are calculated. The frequency of the concrete beam is obtanied by analytical method. Three samples with 0.02% GO nanoparticles are built and its compressive strength is compared which shows a good accuracy with maximum 1.29% difference with mathematical model and other papers. The aim of this work from the theoretical study is investigating the effects of nanoparticles volume percentage and agglomeration, length and thickness of the beam on the frequency of the structure. The results show that the with enhancing the GO nanoparticles, the frequency is increased. For example, with enhancing the volume percent of GO nanoparticles from zero to 0.08%, the compressive strength is increased 48.91%. and 46.83%, respectively for two cases of with and without agglomeration.

• 방사성폐기물학회지
• /
• 제17권2호
• /
• pp.167-181
• /
• 2019

최근 국내에서 육상 및 해상을 통한 소외 정상운반 시 진동 및 충격하중에 대한 사용후핵연료의 건전성 평가 기술 개발이 수행되고 있다. 이와 관련된 국내 연구사례는 전무하여 기존에 진행된 또는 현재 수행중인 해외연구사례를 조사하여 국내 연구에 참고하고자 한다. 2000년 이전 과거 미국의 사용후핵연료의 정상운반 시 진동 및 충격하중 측정 관련 연구현황을 조사하였고 2009년부터 미국국립연구소 주관으로 실시한 단축가진시험, 콘크리트블럭 트럭운반시험, 다축가진시험에 대해서 조사하였으며 2017년 미국 SNL, 스페인의 ENSA, 한국이 공동으로 수행한 복합운반시험을 상세히 조사하였다. 시험 준비과정, 절차, 가속도 및 변형률 측정결과, 유한요소 및 다물체동역학 해석과정 등이 조사되었다. 각 시험 별로 측정된 변형률 자료를 바탕으로 사용후핵연료 피로곡선과 비교한 결과 손상을 일으키기에는 매우 미미한 정도의 변형률이 발생한다는 초기 결론을 얻었음을 확인하였다. 하지만 현재 결론은 일부 결과만을 검토한 예비 결론으로 상세한 검토가 현재 미국에서 진행 중이다. 미국에서 지금까지 수행한 사용후핵연료의 정상운반조건에서의 진동 및 충격하중 측정과 관련하여 조사된 내용은, 국내 운반환경에서 사용후핵연료의 정상운반시험을 수행할 때 참고할만한 유용한 자료라 판단된다.

• Advances in aircraft and spacecraft science
• /
• 제5권2호
• /
• pp.225-237
• /
• 2018

The difficulties of satellite vibration testing are due to the commonly expressed qualification requirements being incompatible with the limited performance of the entire controlled system (satellite + interface + shaker + controller). Two features cause the problem: firstly, the main satellite modes (i.e., the first structural mode and the high and low tank modes) are very weakly damped; secondly, the controller is just too basic to achieve the expected performance in such cases. The combination of these two issues results in oscillations around the notching levels and high amplitude beating immediately after the mode. The beating overshoots are a major risk source because they can result in the test being aborted if the qualification upper limit is exceeded. Although the abort is, in itself, a safety measure protecting the tested satellite, it increases the risk of structural fatigue, firstly because the abort threshold has been already reached, and secondly, because the test must restart at the same close-resonance frequency and remain there until the qualification level is reached and the sweep frequency can continue. The beat minimum relates only to small successive frequency ranges in which the qualification level is not reached. Although they are less problematic because they do not cause an inadvertent test shutdown, such situations inevitably result in waiver requests from the client. A controlled-system analysis indicates an operating principle that cannot provide sufficient stability: the drive calculation (which controls the process) simply multiplies the frequency reference (usually called cola) and a function of the following setpoint, the ratio between the amplitude already reached and the previous setpoint, and the compression factor. This function value changes at each cola interval, but it never takes into account the sensor signal phase. Because of these limitations, we firstly examined whether it was possible to empirically determine, using a series of tests with a very simple dummy, a controller setting process that significantly improves the results. As the attempt failed, we have performed simulations seeking an optimum adjustment by finding the Least Mean Square of the difference between the reference and response signal. The simulations showed a significant improvement during the notch beat and a small reduction in the beat amplitude. However, the small improvement in this process was not useful because it highlighted the need to change the reference at each cola interval, sometimes with instructions almost twice the qualification level. Another uncertainty regarding the consequences of such an approach involves the impact of differences between the estimated model (used in the simulation) and the actual system. As limitations in the current controller were identified in different approaches, we considered the feasibility of a new controller that takes into account an estimated single-input multi-output (SIMO) model. Its parameters were estimated from a very low-level throughput. Against this backdrop, we analyzed the feasibility of an LQG control in cancelling beating, and this article highlights the relevance of such an approach.