• 대한족부족관절학회지
• /
• 제22권3호
• /
• pp.95-99
• /
• 2018

Purpose: The purpose of this study was to evaluate the radiologic outcomes of distal fibular fractures and to analyze the risk factors associated with nonunion. Materials and Methods: Between January 2009 and March 2016, 13 patients who had final nonunion with ankle fracture were included. In the control group, 370 patients who had undergone bony union and removed metal implants were included. All patients underwent the same surgical procedure and had the same treatment method, ultimately achieving satisfactory open reduction results with less than 2 mm fracture gap. Surgical treatment of fracture was considered to have the same effect on nonunion, and factors that might be associated with nonunion were evaluated. SPSS ver. 13.0 (SPSS Inc., USA) was used for all statistical analyses. Pearson's chi-square test and multi-variate regression analysis were performed to determine the factors affecting nonunion of distal fibular fracture. A p-value less than 0.05 was considered statistically significant, and relative risk was assessed. Results: The mean age of 13 patients was 46.9 years (range, 16~57 years); there were 8 men and 5 women. Among the 13 patients with nonunion, atrophic was the most common (12 cases). The association between the injury mechanism and the Lauge-Hansen classification and diabetes mellitus was not statistically significant. Distal fibular fractures with tibia shaft fracture (p=0.015) and Danis-Weber type C fracture (p=0.023), open fracture (p=0.011), and smoking (p=0.023) were significantly associated with nonunion. Conclusion: In this study, the combined injury of the ipsilateral tibia shaft fracture, open fracture, and Danis-Weber type C fracture may increase the possibility of nonunion. Therefore, caution is advised to prevent nonunion.

• 한국정밀공학회지
• /
• 제11권1호
• /
• pp.63-70
• /
• 1994

This paper presents manufacturing and evaluation of a non-contact rotational torque measurement system which consists of torque cell, telemeter system, transmitter and receiver coil, transmitter, receiver and telemeter indicator. Static calibration test results show that the system has a maximum uncertaintry of 05% or less. A standar calibration system for rotational torque is used to evaluate the measurement system, As a result, the maximum uncertainty for measuring rotational torque by this system is 2% or less. We may conclude that the measurement system is sufficient to measure rotational torque of shaft in industry.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권1호
• /
• pp.92-101
• /
• 2010

본 연구에서는 회전체를 지지하는 자기 베어링에 관하여, 2장에서는 적분형 서보계를 이용하여 횡축형 자기베어링 시스템(Horizontal-shaft Magnetic Bearing System: HMBS)에 대한 불확실성을 고려하면서 과도상태 응답개선에 대한 이론적인 고찰과 제어기설계 수식을 유도한다. 그리고 HMBS에 대해 물리 퍼래미터 변동에 대한 강인성과 외란의 영향을 저감하고 기준위치 변경에 따른 추종성을 갖도록 상태 피드백 제어기를 LMI 기법을 이용하여 설계한다. 3장에서는 설계한 제어칙을 가지고 시스템 불확실성의 변동에 대해 시간영역의 설계사양을 고려한 경우와 고려하지 않은 경우에 대하여 시뮬레이션을 행하고 실제 적용 가능성을 검토한다.

• 한국방재학회 논문집
• /
• 제1권1호
• /
• pp.81-90
• /
• 2001

2경간 연속 철도교의 종방향 거동에 영향을 미치는 여러 인자들에 대해서 연구하였다. 그 인자들로는 교각 강성의 크기, 교각의 높이, 교각기초의 크기와 교각받침의 강성을 변화시켜 그에 따른 변화양상을 살펴보았다. 그 결과 고정단 교각에서의 여러 인자들의 변화에 따른 종방향 거동의 변화가 가동단 교각에서의 변화에 따른 영향보다 크다는 사실을 확인할 수 있었다. 또한, 받침강성을 변화시켜서 종방향 거동을 제어하는 것이 다른 인자들을 변화시키는 것보다 더 경제적이라 할 수 있다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권1호
• /
• pp.55-65
• /
• 2017

Underwater torpedo has control fin with very low aspect ratio due to launching from limited size of cylindrical torpedo tube. If the aspect ratio of control fin of underwater vehicle is very low three-dimensional flow around control fin largely reduces control forces. In this study, the end plate was applied to reduce the three-dimensional flow effects of partially movable control fin of underwater vehicle. Through numerical simulations the flow field around control fin was examined with and without end plate for different flap angles. The pressure, vorticity, lift and torque on the control fin were analyzed and compared to experiments. The comparison have shown a reasonable agreement between numerical and experimental results and the effect of end plate on a low aspect ratio control fin. When the end plate was attached to the movable control fin, the lift increased and the actuator shaft torque did not significantly change. As this means less consumption of the actuator shaft torque compared to the control fin that has the same control force, the inner actuator capacity can be reduced and energy consumption can be saved. Considering this, it is expected to be effectively applied to the control fin design of underwater vehicles such as torpedoes.

• 센서학회지
• /
• 제29권3호
• /
• pp.205-210
• /
• 2020

The aim of this study is to develop a vertical vibration compensator that attenuates the vertical vibration of ships. The vibration compensator was designed according to the principle of generating vertical excitation forces by rotating two eccentric bodies of the same mass in opposite directions at the same rotational speed. In addition, the structural stability was analyzed using the finite element method. The maximum stress in the drive shaft was 95.6 MPa, which was approximately 35% of the allowable stress of the shaft material (SM45C, 270 MPa). The acceleration signals of the vibrator compensator body and the testbed were determined to evaluate the efficiency of the vibration compensator and the designed excitation forces. Subsequently, the excitation forces were estimated based on the relationship between force and acceleration. The estimated results were very close to the theoretical values with an error of less than 3%.

• Journal of Biosystems Engineering
• /
• 제36권4호
• /
• pp.243-251
• /
• 2011

Purpose of this study was to analyze power requirement of an agricultural tractor for baler operation. First, a power measurement system was developed and installed in a 75 kW agricultural tractor. Strain-gages with a telemetry system were used to measure torques of transmission and PTO input shafts. An engine tachometer was used to measure rotational speed of transmission and PTO input shafts. The measurement system also included pressure sensors to measure pressure of hydraulic pumps, an I/O interface to acquire the sensor signals, and an embedded system to determine power requirements. Second, field experiments were conducted at two PTO speed levels, and proportion of utilization ratio of rated engine power and power consumption of major parts (transmission input shaft, PTO input shaft, main hydraulic pump, and auxiliary hydraulic pump) were analyzed. Results of usage proportion of engine power for PTO speed level 1 and 2 were 4.1 and 2.2%, 31.5 and 16.3%, 49.6 and 59.7%, 14.4 and 20.8%, and 0.4 and 1.0%, respectively, for ratio of measured engine power to rated engine power of less than 25%, 25 ~ 50%, 50 ~ 75%, 75 ~ 100%, and greater than 100%. The results showed that the usage proportion increased in the range with the ratio of power requirement to rated engine power of over than 50% when the PTO gear was shifted from P1 to P2. Averaged engine power requirement for baling operation, tying and discharging operation, and total operation were 43.3, 37.3, and 42.0 kW and 49.0, 37.0, and 47.4 kW, respectively, for PTO speed level 1 and 2. Paired t-test showed significant difference in power consumption of engine, transmission input shaft, and PTO input shaft for different PTO speed levels. Therefore, the power consumption of engine for baler operation increased when the PTO gear was shifted from P1 to P2. It was indicated that the power requirement of tractor was affected by the PTO rotational speed for baler operation.

• Clinics in Shoulder and Elbow
• /
• 제11권2호
• /
• pp.143-149
• /
• 2008

목적: 근위 상완골 골절에서 잠김 압박 금속판과 비잠김 금속판 고정의 방사선학적 임상적 추시 결과를 비교 분석하고자 하였다. 대상 및 방법: 2003년부터 2007년 까지 본원에서 근위 상완골 골절로 입원하였던 87명의 환자중 금속판 고정술을 시행 받았던 환자 20명을 대상으로 하였으며 20명의 환자는 잠김 압박 금속판 고정을 시행하였던 환자 10명, 비잠김 금속판 고정을 시행하였던 환자 10명의 두 군으로 나뉘었다. 각각의 환자군은 수술 직후와 수술 후 6개월 뒤 방사선 사진상 상완골의 경간각, 골유합까지 소요된 시간, 합병증의 빈도 그리고 마지막 추시 당시의 Constant score를 측정하여 서로 비교 분석 하였다. 결과: 상완골의 경각간 및 골유합, Constant score에 대해서 두 군은 유의한 차이를 보이지 않았으나 비잠김 금속판을 사용한 군에서 나사 풀림 현상이 3례에서 발견되었다. 결론: 추시 결과상 잠김 압박 금속판의 사용이 비잠김 금속판에 비하여 임상적, 방사선학적으로 유의한 차이는 없었으나 근위 상완골 골절의 치료에서 나사 풀림 현상 등의 합병증이 적은 잠김 압박 금속판을 사용하는 것이 더 효과적일 것으로 사료된다.

• 한국건축시공학회지
• /
• 제11권6호
• /
• pp.530-537
• /
• 2011

연구는 SHCC의 건축시공 현장적용을 목적으로 현장 제조설비인 배치플랜트 2-Shaft 믹서를 이용하여 SHCC 제조 및 타설을 통해 실부재 실험을 실시하고, 이를 실내실험 결과와 비교 검토함으로서 향후 SHCC의 현장적용을 위한 기초자료로 제시하고자 하였다. 그 결과, 실내 Omni 믹서와 2-Shaft 믹서에서 SHCC 제조시 인장강도는 유사하였지만, 변형률에서 Omni 믹서가 2.5 % 이상 우수하였다. 배치플랜트 3500 L 2-Shaft 믹서에서 제조된 SHCC의 경우, 실내 100 L 2-Shaft 믹서에서 제조한 SHCC에서 인장 성능이 보다 높게 나타났다. SHCC의 현장적용 확대를 위해서는 배치플랜트 현장 제조시 건비빔, 모르타르 비빔시간을 충분히하여 매트릭스를 균질성을 확보하고, 비빔단계에서 적절한 점성 및 유동성을 확보할 수 있는 다양한 방법을 고려해야 한다.

• 화약ㆍ발파
• /
• 제39권3호
• /
• pp.15-23
• /
• 2021

통기 수갱은 지하공간 개발시 분진 또는 매연 등을 제거하기 위해 광산과 터널에서 사용되는 통로이다. 광산에서는 통기 수갱 개발을 위해 10~20m 구간의 크라운필라 영역을 1회의 장공발파로 굴착하는 공법이 적용 가능하다. 이 경우 천공오차를 파악하기 위해 장약공을 완전히 천공하였을 때 장약공 하부가 구속되지 않으며, 또한 이는 폭약 장약과 발파효율을 떨어트리는 문제를 발생시킨다. 이는 장약공 하부에 전색을 사용함으로 장약공 하부를 전색하여 폭약 장약의 문제를 해결하고 발파효율을 증가시킬 수 있다. 본 연구에서는 ANSYS AUTODYN 2D SPH(Smooth particle hydrodynamics) 해석기법을 이용하여 장약공 직경(45, 76mm)과 다양한 전색장을 달리한 통기 수갱 발파 시뮬레이션을 실시하였다. 또한 발파에 따른 하부의 대괴 사이즈, 저항선을 확인하여 최적의 하부전색장을 도출하였다. 해석 결과 하부전색장 30cm 이하의 경우 발파효율이 저하되며, 발파효율을 높이기 위해서 30cm 이상의 전색장을 적용하여야 함을 확인하였다.