• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.51-55
• /
• 2004

A composite Iso-grid panel is manufactured and tested by compressive load. Vertical stringers and side stringers are joined with skin by secondary bonding using a liquid type adhesive. Bonding fixtures were developed to attach the stringers to skin. A-scan was done for inspection of secondary bonding region. The out of displacement field is visualized by shadow moire system. The strain and vertical displacement are measured by strain gages and L VDT (Linear Variable Differential Transformer). A local buckling is occurred at all grid sections. After that, the final failure is occurred. The strain of side stringer is much less than that of vertical stringer and skin. Due to the side stringer, the local buckling is delayed. Therefore the ratio of the first buckling to failure load is greater than that of vertical stringer stiffened panel.

• 설비공학논문집
• /
• 제2권3호
• /
• pp.208-217
• /
• 1990

A rectangular test section is devised by assuming two dimensional melting of a solid phase change material heated from two sides which are maintained at constant temperature and allowing a free expansion due to density difference between solid and liquid. The timewise melting shape is recorded photographically by the shadow graph method for several experimental conditions. The analysis shows that the melting process consists of four regimes. At first, the pure conduction heat transfer is dominant, and as time goes by natural convection grows and plays a role greatly. Experiments are carried out varying not only the wall temperature but height of the wall. Each effect of them on the melting process is obtained in the form of combination of dimensionless parameters, $Ste^{0.8}\;FoRa^{0.2}$. An algebraic correlation is suggested, which predicts the melted fraction well.

• 한국기계가공학회지
• /
• 제5권3호
• /
• pp.11-16
• /
• 2006

A new method to fabricate metal electrodes on side wall of the microchannel is presented. Electrical signal can be measured by the metal electrodes on channel side wall when microparticles pass through a polymer microchannel. 3 dimensional metal electrodes on channel side wall could be fabricated by local deposition of metal through a shadowmask and inclined evaporation. The polymer microchannel with side wall electrodes could be precisely aligned onto metal contact patterns on pyrex glass. The impedance measurement test showed possibility of electrical signal measurement using the fabricated device.

• 품질경영학회지
• /
• 제42권3호
• /
• pp.301-310
• /
• 2014

Purpose: The purpose of this study is to improve a mechanism of expendable bathythermograph measurement by balancing wire resistances between plus wire part and minus wire part and by removing effects of sea water resistance between XBT(Expendable Bathythermograph) and temperature recorder. Methods: The problems are exactly found out through the analysis of XBT and temperature recorder circuit. A process of XBT manufacturing that balances wire resistances between plus wire part and minus wire part is added. Results: The results of this study are as follows; the complicated test process such as temperature accuracy test with a cistern is substituted with a simple process of XBT manufacturing such as balancing wire resistances between plus wire part and minus wire part. Then, the temperature accuracy tolerance of XBT is improved up to ${\pm}0.1^{\circ}C$. Conclusion: Consequently, balancing wire resistances and removing effects of sea water resistance improve temperature accuracy of XBT and reduce expensive and harassing process of XBT manufacturing.

• 전기학회논문지
• /
• 제62권12호
• /
• pp.1813-1819
• /
• 2013

Existing level crossing obstacle detecting system was installed using a laser beam. Level crossing obstacle detecting system using a laser beam that has been a problem in relation to safety and maintainability failure according to weather conditions. We proposed laser radar level crossing obstacle detecting system as a way to overcome problem, and we developed an algorithm for this. Level crossing obstacle detecting system using a laser radar sensor algorithm is robust to external environment and a shadow zone does not exist. Sensor part of the laser radar level crossing obstacle detecting system of these is made up by the image processing unit and laser radar sensor, it operations by receiving train entering information from the control unit. In this paper, we proposed a detecting algorithm with calculation of the size of the laser radar sensor. Based on this, we were performance test on the basis of the scenario by making a prototype. In the future, laser radar level crossing obstacle detecting system to ensure the safety and reliability through the field test.

• 대한조선학회논문집
• /
• 제58권1호
• /
• pp.24-31
• /
• 2021

In this study, we present experimental observations of artificial supercavitation generated by the injection of compressed air at multiple locations on the body. Experiments were conducted at a cavitation tunnel equipped with a special facility to remove injected air before returning to the test section. Artificial supercavitation, which is generated at a relatively low speed compared to natural supercavitation, is formed asymmetrically on the axis of the body due to the buoyancy effect. In order to accelerate the development of the supercavity and increase the area covering the body, an experimental device capable of additional injection from the body was designed and its performance was evaluated through the model test. The shapes of the supercavity generated by multi-injections of different combinations according to different flow speeds were analyzed using high-speed shadow images. The results show that multiple injections at suitable locations can effectively increase the length of the supercavity and consequently improve propulsion efficiency.

• 한국지반공학회지:지반
• /
• 제13권2호
• /
• pp.155-168
• /
• 1997

격자지보는 NATM에서 터널굴착 후 곧바로 설치되는 강지보재의 한 종류로서 기존의 H형강 지보재를 대체하고자 유럽에서 개발된 새로운 종류의 지보재이다. 격자지보는 강봉을 삼각형태로 엮어 만들었기 때문에 숏크리트 타설이 용이하고 지보재 배면에 생기는 공동을 최소화 할 수 있는 장점이 있다. 또한 격자지보와 숏크리트 복합구조체는 결합력이 우수하여 일체화된 구조체로서 거동하기 때문에 지압을 효과적으로 지지할 수 있다. 본 연구에서는 격자지보와 숏크리트 복합구조체의 특성파악을 위해 실시한 모형벽체 시험, 모형벽체에 타설된 숏크리트의 강도특성시험, 격자지보와 숏크리트의 부착강도시험 결과를 제시하였다. 실험결과 숏크리트가 타설된 격자지보는 숏크리트가 타설된 H형강 지보재에 비해 숏크리 트 리바운드, 타설된 숏크리트의 강도, 부착특성 등이 우수한 것으로 판명되었고, 이로써 격자지로는 적절한 터널지보재로서의 역할을 할 것으로 판단되었다.

• Journal of Biosystems Engineering
• /
• 제40권1호
• /
• pp.19-27
• /
• 2015

Purpose: A system to measure the visibility of agricultural tractor operators was designed and evaluated according to ISO standards, and a blind area diagram around the tested tractor was created based on the manual method recommended by the National Institute for Occupational Safety and Health (NIOSH). Methods: A visibility measurement system was designed and evaluated based on the ISO 5006 and ISO 5721-1 standards. Two bulbs used to simulate the operator's eyes were mounted on a bar with a supporting frame. A wooden frame was used to determine the seat index point position. The 12-m visibility test circle was divided into six sectors of vision, and the test tractor was placed at the center of the circle. Artificial light was supplied in the darkened environment, and shadow or masking effects were measured manually around the 12-m circle. Results: When the bulbs were placed at the operator's eye level, front visibility was good; no masking was found in the "A" vision sector, but larger masking widths were found in the "B" and "C" vision sectors. Since the masking width exceeded 700 mm, additional tests, such as movement of the light sources to both sides of the operator's eye level, were performed. Less than six masking effects were found in the semi-circle of vision to the front, and more than one masking was found in the "B" and "C" visual fields. The minimum distance between the centers of two masking effects exceeded 2500 mm when measured as a chord on the semi-circle of vision. A blind area diagram was created to define the exact nature of the blind spots and mirror visibility. Conclusions: Visibility evaluation is an effective way to enable proper and safe operation for agricultural tractor operators. Inclusion of this visibility evaluation test in the general testing process might aid tractor manufacturers.

• 수산해양기술연구
• /
• 제39권4호
• /
• pp.347-357
• /
• 2003

연근해 소형 어선에 널리 탑재되어 있는 소형 레이더 장치에 radar target extractor를 인터페이스하여 레이더 선호를 수록, 처리 및 해석하기 위한 PC based radar system 을 구축하고, cell averaging CFAR 처리장치를 통해 실제의 레이더 echo 신호를 처리하여 오경보 확률의 설정치 변화에 따른 echo영상의 변화패턴을 레이더 스코프상에서 직접 비교, 분석한 결과 및 레이더 영상신호의 음영구역의 발생대역폭을 추정한 결과를 요약하면 다음과 같다. 1. 레이더 선호의 해석을 통해 추출된 표적의 운동벡터 및 방위, 거리, 속력, CPA, TCPA 등과 같은 ARPA 정보를 실시간으로 이동 궤적과 함께 PC 모니터상에 구현하고 있기 때문에 소형 레이더 시스템에 이 장치를 부착하면 저가의 비용으로써 ARPA 정보의 취득이 기능하다. 2. ideal threshold 에 의한 표적검출성능을 개선시키기 위해 cell averaging CFAR processor 의 CUT전후에 각각 3 개의 guard cell과 이 cell의 좌$.$우측에 각각 20개씩, 총 40개의의 reference cell를 설치하여 레이더의 video 신호를 입벽한 후, 오경보 확률 10$\^$-0.25/∼10$\^$-1.0/의 범위에 대하여 설정치를 점차증가시켜 갈 때, 레이더 영상신호는 10$\^$-0.75/ 의 설정치에서 가장 양호한 clutter 제거효과를 나타내었다. 3. 레이더 스코프상에서 영상신호를 관찰하면서 cell averaging CFAR 의 오경보 확률을 적정하게 제어하면 지금까지의 ideal threshold level 에 의한 잡음억제기법에서 나타나는 선박영상의 과도한 레벨약화현상을 보완할 수 있을 것으로 판단한다. 4. 부산 용호만에 정박중인 예인선의 레이더 신호를 해석하여 영상의 음영패턴과 음영 대역폭을 추정한 결과, 예인선의 유효높이는 약 1.2 m 이었고, 이들 음영효과의 정량적 해석을 통한 해상표적의 형상정보는 향후 3차원 레이더 영상을 구현하는 데 그 기초자료가 될 것으로 판단된다.

• 한국통신학회논문지
• /
• 제24권6B호
• /
• pp.1191-1202
• /
• 1999

본 논문에서는 간단히 한국통신학회본 논문에서는 웨이브렛 영역에서의 질감 유사성을 특징으로 사용함으로써 프레임간의 급격한 밝기변화에 강건한 특성을 가지는 툴게이트 과금을 위한 차량검지 및 차종분류 알고리듬을 제안하였다. 질감의 유사성을 나타내는 특징으로는 웨이브렛 변환된 입력영상과 배경영상 간의 국부상관계수를 이용하였다. 기존의 차량검지에서 사용되었던 특징인 차영상에 대한 분산과 비교하여 제안된 특징의 유용성을 정상적으로 분석하였으며, 실제 테스트 영상에 대하여 차량과 그림자가 관측되거나 관측되지 않는 도로와의 구분 용이성 정도를 측정함으로써 제안된 특징의 우수성을 보인다. 현장 테스트에 대한 실험 결과는 제안된 차량검지 및 차종분류 알고리듬이 센서의 특성과 그림자의 발생에 의한 프레임 간의 급격한 밝기 변화와 같은 상황하에서도 매우 안정적이며 우수한 성능을 보이는 것을 확인할 수 있다.