• Title/Summary/Keyword: shade selection

Search Result 41, Processing Time 0.029 seconds

A Study on the Site Selection for Wind Power Using GIS (GIS를 이용한 풍력발전단지 최적입지 선정방법에 관한 연구)

  • Jeon, Sang-Hee;An, Seung-Man;Choi, Young-Jean;Sung, Hyo-Hyun
    • New & Renewable Energy
    • /
    • v.7 no.3
    • /
    • pp.83-91
    • /
    • 2011
  • The purpose of this study is to select appropriate location factors for wind power plant, provide detailed classification criteria, and find out appropriate sites for installing wind power plant in Gangwondo. In this study, the following 11 factors were extracted for site selection of wind power plant : wind resource, topography (valley angle, distance to the ridge), forest density, land use, preservation area, national park, Baekdu-Daegan, noise, shade, Transmission Line, and approaching roads. Each factor had relatively different level of importance so that AHP (Analytic Hierarchy Process) technique was used to calculated the weighted value per factor. For overlay analysis, classification criteria were prepared for each factor and each factor was classified into 3 grades : very appropriate, intermediate, poor. According to overlay analysis, the areas which received the highest grade (grade 5) was only in 0.16% of the total area of Gangwondo and had a tendency to exist along the mountain ridge over 600-meter elevation. Through analyzing the yearly average of wind power density, it was proved that the wind power density of areas with grade 4 or 5 had abundant wind resource over $400W/m^2$.

A Spray Chrysanthemum, 'Secret Pink' with Early Blooming, Long Vase Life, Multi-floret, Single Flower Type, and Pink Petals for Cut Flower (조기개화성, 다화성 분홍 홑꽃 절화용 스프레이국화 '시크릿핑크' 육성)

  • Lim, Jin-Hee;Shin, Hak-Ki;Park, Sang-Kun;Cho, Hae-Ryong;Rhee, Hye-Kyung;Kim, Mi-Seon;Joung, Hyang-Young;Yae, Byeong-Woo
    • Horticultural Science & Technology
    • /
    • v.30 no.1
    • /
    • pp.101-105
    • /
    • 2012
  • 'Secret Pink' was released by National Institute of Horticultural & Herbal Science in 2008. The cross was made between '03B1-23' and 'Sei-Monaco in 2005'. After the evaluation of the characteristics under shade culture in summer and retarding culture in spring and consecutive selection from 2006 to 2008, 'Secret Pink' was selected finality. The natural flowering time of 'Secret Pink' was the middle of October, and it is possible to flower all year round by shade and light culture. It has single type flowers with pink petals. The growth of plant was very vigorous and response time was 6.5 weeks. The diameter of flower was 6.7 cm. Number of flowers per stem and petals per flower were 14.5 and 25, respectively. Days to flowering under the short day treatment was about 50 and its vase life was 25.5 days in autumn season.

A Spray Chrysanthemum, 'Green Candy' with Double Flower Type and Green Petals for Cut Flowers (녹색 겹꽃 절화용 스프레이국화 '그린캔디' 육성)

  • Lim, Jin Hee;Shin, Hak Ki;Park, Sang Kun;Choi, Seong Yeol;Lee, Jung-Soo
    • Horticultural Science & Technology
    • /
    • v.31 no.3
    • /
    • pp.388-392
    • /
    • 2013
  • A spray chrysanthemum cultivar 'Green Candy' was released by National Institute of Horticultural & Herbal Science, Rural Development Administration, in 2009. The cross between 'Yoko Ono', a spray chrysanthemum cultivar with light yellowish-green double type, and 'Green Bird', a spray chrysanthemum cultivar with vigorous and green double type, was made in Suwon in 2006. After the evaluation of the characteristics under shade culture in summer and retarding culture in spring and consecutive selection from 2007 to 2009, 'Green Candy' was selected finality. The natural flowering time of 'Green Candy' is October 28th, and it is possible to flower all year-round by shade and light culture. It has double flower type with green petals. The growth of plant is very vigorous and the color of the petals is stable when the variety is cultivated under high temperature conditions in summer season. The diameter of flower is 4.1 cm. The numbers of flower per stem and petals per flower are 12 and 217, respectively. The days for flowering under the short day treatment are about 58 and its vase life is 18.1 days in autumn season. 'Green Candy' was applied as No. 2010-212 on March 5, 2010 for variety protection and the plant variety protection rights have been registered as No. 3633 on August 2, 2011 at the Korea Seed and Variety Service.

Breeding of a New Saxifraga fortunei Cutivar (Hybrid) 'Whitegreen' with Light Green and White Colored Petals as a Pot Flower (밝은 연녹색의 분화용 바위떡풀 신품종 '화이트그린' 육성)

  • Suh, Jong-Taek;Hong, Su-Young;Yoo, Dong-Lim
    • Korean Journal of Plant Resources
    • /
    • v.27 no.5
    • /
    • pp.588-592
    • /
    • 2014
  • A new Saxifraga fortunei cultivar 'Whitegreen' was bred by crossing between 'Daewoojoo' with Pale Green (Y-G145-C) colored petals and 'Kwanglim' with light Yellow green (Y-G145A) colored petals. The selection and flower characterization were conducted from 2004 to 2008 in greenhouse of Highland Agriculture Research Center, NICS, RDA. Flowering in 'Whitegreen' Showed from September 20 th for 33 days. The number of petals were 11.4 ea., with a width of 1.4 cm and length of 1.4 cm. The plant height was 20.7 cm, and number of leaves per plant was 48.3 ea., with a width of 3.4 cm and length of 3.0 cm. 'Whitegreen' cultivar can be used as a pot flower. 'Whitegreen' plants grown under 50% shade of sunlight have higher degree of acclimation compared to those under direct sunlight. And soft rot disease would occur usually by over-irrigation. 'Whitegreen' cultivar was registered as a novel variety with No. 3456 in Korea seed and variety service on April 2011.

Selection of Pollution-tolerant Plants and Restoration Planning to Recover the Forest Ecosystem Degraded by Air Pollution in the Industrial Complex

  • Lee, Chang-Seok;Moon, Jeong-Suk;Hwangbo, Jun-Kwon;You, Young-Han
    • Animal cells and systems
    • /
    • v.6 no.1
    • /
    • pp.59-64
    • /
    • 2002
  • To restore the forest ecosystem severely damaged by air pollution around industrial complexes, plants tolerant to the polluted environment were selected by transplant and pot culture experiments. A restoration plan by arranging those tolerant species was prepared based on the ecological diagnostic results on an area that requires restoration. Transplant experiment in Ulsan and Yeocheon areas, the representative industrial complexes in Korea, selected eight tolerant species of Quercus aliena, Q. acutissima, Q. dentata, Q. mongolica, Q. serrata, Ligustrum japonicum, Styrax japonica, and Poncirus trifoliata. Cultivation in the polluted soil transported from the Ulsan and Yeocheon industrial complexes chose five tolerant plants of Q. aliena, Q. acutissima, Q. serrata, Styrax japonica, and Alnus firma. A plan to restore the forest ecosystem of Mt. Dotjil, which experienced the severest ecosystem degradation in the Ulsan industrial complex, was prepared by applying those tolerant species along with treatment for soil amelioration. Arrangement of the tolerant species was designed by considering their ecological characteristics including distribution range on topography and shade tolerance. Soil amelioration was focused on the improvement of fertility and moisture conditions.

Function of Home Energy Savings and Carbon Emission Reduction by Urban Vegetation- Case of Chuncheon- (도시식생의 주택에너지절약 및 탄소배출저감 기능 -춘천시를 대상으로-)

  • 조현길;서옥하;한갑수
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.26 no.3
    • /
    • pp.104-117
    • /
    • 1998
  • Rising concern about climate change has evoked interest in the potential for urban vegetation to help reduce the level of atmospheric CO\sub 2\, a major heat-trapping gas. This study quantified the functio of home energy savings and carbon emission reduction by shading, evapotranspiration and windspeed reduction of urban vegetatioin in Chuncheon. Tree and shrub cover averaged approximately 13% in residential land. The effects of shading, evapotranspiration and windspeed reduction annually saved heating energy by 2.2% and cooling energy by 8.8%. The heating and cooling energy savings reduced carbon emissions by 3.0% annually. These avoided emissions equaled the amount of carbon emitted annually from fossil fuel consumption by a population of about 1,230. Carbon emission reduction per residential building was 55kg for detached buildings and 872 kg for multifamily buildings. Urban vegetation annually decreased heating and cooling energy cost by ₩1.1 billions, which were equivalent to annual savings of ₩10,000 savings and carbon emission reduction due to tree plantings in the wrong locations, while windspeed reduction had a great effect. Plantings fo large trees close to the west and east wall of buildings, full tree plantings on the north, and avoidance of shade-tree plantings or selection of solar-friendlytrees on the south were recommended to improve the function of building energy savings and carbon emission reduction by urban vegetation.

  • PDF

A New Spray Chrysanthemum, "Pure Angel" with Resistant to White Rust, Single Flower Type and Pure White Petals for Cut Flower

  • Lim, Jin-Hee;Shin, Hak-Ki;Park, Sang Kun;Cho, Hae-Ryong;Rhee, Hye-Kyung;Kim, Mi-Seon;Joung, Hyang Young
    • Korean Journal of Breeding Science
    • /
    • v.41 no.2
    • /
    • pp.173-176
    • /
    • 2009
  • A new spray chrysanthemum cultivar 'Pure Angel' was released by National Institute of Horticultural and Herbal Science (NIHHS), Rural Development Administration (RDA), Korea in 2007. The cross was made in 2004 between 'Innocence', a breeding cultivar of NIHHS, and 'Baeksokuk', a spray cultivar with white petals. Trials were conducted from 2005 to 2007 for the evaluation and selection of this cultivar, including shade cultures in summer and retarding cultures in autumn. The natural flowering time of 'Pure Angel' is late October, but year-round flowering is possible by photo-periodic control. The cultivar has single type flowers with pure white petals and a green flower center. It shows long vase life and resistance to white rust. The diameter of flower is 52.5 mm. The numbers of flowers per stem and petals per flower are 12 and 22.5, respectively. Days to flowering under the short day treatment is about 52 days in spring seasons.

A New Spray Chrysanthemum, "Pink Berry" with Resistance to White Rust, and Long Vase Life, Single Flower Type and Pink Petals for Cut Flower

  • Lim, Jin-Hee;Shin, Hak-Ki;Park, Sang Kun;Cho, Hae-Ryong;Rhee, Hye-Kyung;Kim, Mi-Seon;Joung, Hyang-Young
    • Korean Journal of Breeding Science
    • /
    • v.41 no.2
    • /
    • pp.141-144
    • /
    • 2009
  • A new spray chrysanthemum 'Pink Berry' was released by National Institute of Horticultural and Herbal Science (NIHHS), Rural Development Administration (RDA), Korea in 2007. A cross was made in 2004 between 'Lineker Salmon', a spray cultivar with salmon petals, and 'Baeksokuk', a spray cultivar with white petals. Trials were conducted from 2005 to 2007 for evaluation and selection of this cultivar, including shade cultivation in summer and retarding cultivation in autumn. The natural flowering time of 'Pink Berry' is late October, but year-round flowering is possible by photo-periodic control. The cultivar has single type flowers with pink petals and a green flower center. It shows long vase life of 22 days and resistance to white rust. The diameter of flower is 52.0 mm. The numbers of flowers per stem and petals per flower are 15.5 and 29.5, respectively. Days to flowering under the short day treatment is about 56 in autumn seasons.

Esthetically improved complete denture by gingival shade alteration: a case report (무치악 환자에서 치은의 색조 개선을 통해 심미성을 향상 시킨 총의치 수복 증례)

  • Yim, Soo-Hyun;Kim, Jee-Hwan
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.52 no.3
    • /
    • pp.239-245
    • /
    • 2014
  • Complete denture prosthodontics includes replacement of natural teeth and associated maxillary and mandibular structures for full edentulous patients. The final objectives of prosthodontic treatment include esthetic and functional rehabilitation. Because the esthetic demand of senior patients has increased esthetic requirement should not be overlooked in denture treatment. In complete denture treatment, attempts have been made to reproduce tooth wear, arrangement, recession of cervical gingiva, staining, improved gingival shade and so on. This 61 year old female patient came to the Department of Prosthodontics with the chief complaint that dentures made 5 years ago in a local clinic were broken and did not fit well. The patient put more emphasis on fabrication of natural and esthetic dentures than recovery of masticatory function. Remake of maxillary complete denture and mandibular implant retained overdenture was planned. In order to create esthetic and natural contour, Aesthetic Color Set Easy system$^{(R)}$ (Candulor dental GmbH, Wangen, Germany) was used to make complete dentures reproducing various gingival shades. Patient's esthetic satisfaction was high. When complete denture prosthodontics treatment involves appropriate expression of individual characteristics in addition to proper selection of esthetic materials, treatment will give satisfaction to both dentist and patient.

Effect of light illumination and camera moving speed on soil image quality (조명 및 카메라 이동속도가 토양 영상에 미치는 영향)

  • Chung, Sun-Ok;Cho, Ki-Hyun;Jung, Ki-Yuol
    • Korean Journal of Agricultural Science
    • /
    • v.39 no.3
    • /
    • pp.407-412
    • /
    • 2012
  • Soil texture has an important influence on agriculture such as crop selection, movement of nutrient and water, soil electrical conductivity, and crop growth. Conventionally, soil texture has been determined in the laboratory using pipette and hydrometer methods requiring significant amount of time, labor, and cost. Recently, in-situ soil texture classification systems using optical diffuse reflectometry or mechanical resistance have been reported, especially for precision agriculture that needs more data than conventional agriculture. This paper is a part of overall research to develop an in-situ soil texture classification system using image processing. Issues investigated in this study were effects of sensor travel speed and light source and intensity on image quality. When travel speed of image sensor increased from 0 to 10 mm/s, travel distance and number of pixel were increased to 3.30 mm and 9.4, respectively. This travel distances were not negligible even at a speed of 2 mm/s (i.e., 0.66 mm and 1.4), and image degradation was significant. Tests for effects of illumination intensity showed that 7 to 11 Lux seemed a good condition minimizing shade and reflection. When soil water content increased, illumination intensity should be greater to compensate decrease in brightness. Results of the paper would be useful for construction, test, and application of the sensor.