• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.5
• /
• pp.67-81
• /
• 2017

Because of lack of accurate understanding of the mechanism of urban heat island (UHI) phenomenon and lack of scientific discussion, it is hard to come up with effective measures to mitigate UHI phenomenon. This study systematically described the UHI and suggested the solutions using green-infrastructure (green-infra). The factors that control UHI are very diverse: radiant heat flux, latent heat flux, storage heat flux, and artificial heat flux, and the air temperature is formed by the combination effect of radiation, conduction and convection. Green-infra strategies can improve thermal environment by reducing radiant heat flux (the albedo effect, the shade effect), increasing latent heat flux (the evapotranspiration effect), and creating a wind path (cooling air flow). As a result of measurement, green-infra could reduce radiant heat flux as $270W/m^2$ due to shadow effect and produce $170W/m^2$ latent heat flux due to evaporation. Finally, green-infra can be applied differently on the macro(urban) scale and micro scale, therefore, we should plan and design green-infra after the target objects of structures are set.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2001.04a
• /
• pp.59-62
• /
• 2001

• Journal of Ginseng Research
• /
• v.12 no.1
• /
• pp.11-29
• /
• 1988

This study was conducted to investigate the effect of light intensity and temperature on the photosynthesis and respiration of ginseng plant. Highly significant, second degree curvilinear regressions were recognized among the photosynthesis of ginseng leaves, light intensity and temperature. And an interaction between the effects of light intensity and temperature on the photosynthesis of ginseng leaves was found to be highly significant. The increasing rate of photosynthesis with the increase of light intensity was markedly decreased with increasing temperature. The light compensation point of ginseng leaves was significantly varied with temperature, and the average point was approximately 600 lux. The light saturation point of Korean ginseng was 11,000 lux at $15^{\circ}C$ and $20^{\circ}C$ and around 9,500 lux at above $25^{\circ}C$. The decreasing rate of photosynthesis with the increase of temperature significantly increased with increasing light intensity. The optimum temperature for the photosynthesis of ginseng leaves was about 15 to $22^{\circ}C$ and markedly decreased with increasing light intensity. The highest photosynthesis occurred in ginseng leaves grown with the shade of 15% transmittance. The respiration of ginseng leaves increased with the shade of 5% and/or 30% transmittance. High temperature stimulated the respiration of ginseng leaves. Percent respiration to photosynthesis of ginseng leaves grown with the shade was increased at high temperature and decreased with increasing light Intensity. It was also increased with increasing transmittance. The maximum $CO_2$ absorption of ginseng leaves grown with the shade of 5Ps and ISVS transmittance accurred at 9 o'clock a.m., whereas that of 20% transmittance occurred at 7-9 o'clock a.m. The duration of $CO_2$ absorption was distinctively long with the shade of high transmittance. The $CO_2$ compensation point in the photosynthesis of ginseng leaves was 130 ppm.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.5
• /
• pp.901-908
• /
• 2013

Objectives : The purpose of this study was to evaluate the bleaching effect of 3% hydrogen peroxide containing strip with primer in vivo. Methods : 22 female subjects aged from 20 to 39 years old were recruited after informed consent. They were divided into two groups with control and experimental group. Experimental group was bleached with 3% HP strip with primer, and control group received placebo for 14 days. Color changes were measured with Shade Eye-NCC (Shade Eye-NCC, SHOFU Co., Japan), Shade guide (VITA classical shade guide, $VIDENT^{TM}$, CA, USA) and digital camera image. All collected data were analyzed using SPSS 18.0. Results : At baseline, $L^*$ was $71.75{\pm}3.2$ and $b^*$ was $14.90{\pm}3.6$ in control, and $L^*$ was $71.3{\pm}3.4$ and $b^*$ was $15.61{\pm}3.7$ in experimental group. At day 14, $L^*$ was $71.35{\pm}3.2$ and $b^*$ was $13.97{\pm}4.3$ in control, and $L^*$ was $73.51{\pm}2.0$, $b^*$ was $9.10{\pm}3.0$ in experimental group. ${\Delta}E^*$ of all teeth were statistically significant between the two groups. Final ${\Delta}E^*$ was $7.15{\pm}2.09$ at experimental group and $2.78{\pm}2.93$ at control group, and the difference was significant (p<0.005). Color changes using shade guide also significantly decreased at 14th day compared with baseline at experimental group (p<0.005). Conclusions : 3% hydrogen peroxide strip with primer revealed effective enough to bleaching the human enamel during 14 days without any soft and hard tissue irritations.

• Restorative Dentistry and Endodontics
• /
• v.40 no.4
• /
• pp.270-275
• /
• 2015

Objectives: This study examined the color changes of a resin composite with different shades upon exposure to water with different pH. Materials and Methods: Nanohybrid resin composites (Filtek Z350XT, 3M ESPE) with four different shades (A2, A3, B1, and B2) were immersed in water with three different pH (pH 3, 6, and 9) for 14 day. The CIE $L^*a^*b^*$ color coordinates of the specimens were evaluated before and after immersion in the solutions. The color difference (${\Delta}E^*$) and the translucency parameter (TP) were calculated using the color coordinates. Results: ${\Delta}E^*$ ranged from 0.33 to 1.58, and the values were affected significantly by the pH. The specimens immersed in a pH 6 solution showed the highest ${\Delta}E^*$ values (0.87 - 1.58). The specimens with a B1 shade showed the lowest ${\Delta}E^*$ change compared to the other shades. TP ranged from 7.01 to 9.46 depending on the pH and resin shade. The TP difference between before and after immersion in the pH solutions was less than 1.0. Conclusions: The resulting change of color of the tested specimens did not appear to be clinically problematic because the color difference was < 1.6 in the acidic, neutral, and alkaline solutions regardless of the resin shade, i.e., the color change was imperceptible.

• Korean Journal of Medicinal Crop Science
• /
• v.21 no.2
• /
• pp.118-123
• /
• 2013

This study was carried out to select optimal shade materials among four-layered polyethylene (PE) net (FLPN), aluminium-coated PE sheet (APSS), and blue PE sheet (BPSS) in condition of paddy field cultivated 6-year-old ginseng. The order of light-penetrated ratio and air temperature by shade materials was BPSS > APSS > FLPN. Light-penetrated ratio of BPSS before two fold shade was more 3 times and 2 times than that of FLPN and APSS, respectively. Air temperature of BPSS was also higher $1.6^{\circ}C$ and $1.4^{\circ}C$ than that of FLPN and APSS, respectively. BPSS showed good cultural environment because all of light-penetrated ratio and air temperature were become higher in spring and fall season but lower in summer season by additional shade with two-layered PE net. Survived-leaf ratio was highest in BPSS and lowest in FLPN causing a little water leak on a rainy day. Rusty-root ratio was also highest in FLPN because soil moisture content was increased by water leak. The order of root yield was BPSS > APSS > FLPN, and the cause of highest yield in BPSS was higher light-penetrated ratio during spring and fall season, higher survived-leaf ratio, and lower rusty-root ratio than that of APSS and FLPN. BPSS showed highest total ginsenoside content because of high light-penetrated ratio, blue light effect, and the difference in dry matter partitioning ratio such as low taproot ratio, and high lateral root ratio.

• Journal of dental hygiene science
• /
• v.17 no.6
• /
• pp.481-486
• /
• 2017

The study aimed to compare the whitening efficacy of a strip and gel containing 2.9% hydrogen peroxide, using a tooth whitening light activator. The whitening effect was compared through in vitro and in vivo studies. In the in vitro study, we used stained hydroxyapatite (HAP) specimens as artificial teeth. HAP specimens were made using HAP powder and polyvinyl alcohol solution, and stained by modified Stookey's method. A whitening gel and whitening strip were applied to the respective specimens for 20 minutes, with a light activator. The color changes were measured using a colorimeter. In the in vivo study, one group (test 1) used the gel with a light activator and the other group (test 2) used a strip with the same activator for 15 minutes a day, for four consecutive days. An organoleptic evaluation using a Vita shade guide and instrumental evaluation using a Shade eye-NCC (Shofu Co., Japan) were performed. The color change values (${\Delta}E^*$) in the in vitro study revealed the strip with the light activator to be more effective than the gel with the same activator (p<0.001). In the in vivo study, even though there was no significant difference between the groups with respect to the ${\Delta}E^*$, using either the Shade eye-NCC or the Vita shade guide, the change in yellowness (${\Delta}b^*$) was statistically significant (p=0.024). In conclusion, test 2 group that used 2.9% hydrogen peroxide strip with a light activator, showed a tendency towards increased whitening than test 1 group that used the gel with the same activator; however further studies are needed to validate the above finding.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.1
• /
• pp.61-65
• /
• 1988

To examine the effects of light intensity on photosynthesis, corn and sorghum species were grown under shade cloths, which reduced light intensity by 25,50 and 75%. Photosynthetic rates were measured between 10 a.m. to noon on a clear day in early and mid - summer. 1. The degree of shading had a little effect on microenvironment. Air, soil and leaf temperatures were reduced as shade increased. 2. The degree of shading in early summer had relatively a little effect on photosynthesis of corn. However, the rates of photosynthesis in mid-summer decreased by 36%, 55% with relative light intensities of 50% and 25%, respectively. 3. The rate of photosynthesis was highly correlated with light intensity. The rates of photosynthesis with relative light intensities of 75,50 and 25% were decreased by 20, 40 and 5 4% in early summer, and by 17-53%, 36-64% and 5570% in mid-summer, respectively. 4. The 75% of light intensity had relatively little effect on dry matter yield of corn and sorghum species, however dry matter yield with 50 and 25% relative light intensities was decreased 17 and 36% in corn, 13-3 1 and 50-68% in sorghum species, respectively.

• Structural Engineering and Mechanics
• /
• v.64 no.6
• /
• pp.819-826
• /
• 2017

The effects of thermocycling procedure and material shade on the mechanical properties and wear resistance of resin-based dental restorative materials are investigated. The modulus of elasticity, hardness, plasticity index and wear resistance are determined for the conventional composite, the nanohybrid composite and the nanofilled dental composites. Disc-shape samples are prepared from each material to investigate the effects of thermocycling procedure on the mechanical properties and wear resistance of different types of dental restorative materials. In this respect, a group of samples is thermocycled and the other group is stored in ambient conditions. Then nano-indentation and nano-scratch tests are performed on the samples to measure their mechanical properties and wear resistance. Results show that the A1E shade of the dental nanocomposite possesses higher modulus of elasticity and hardness values compared to the two other shades. According to the experimental results, the mean values for the modulus of elasticity and hardness of the A1E shade of the nanocomposite are 13.71 GPa and 1.08 GPa, respectively. The modulus of elasticity and hardness of the conventional dental composite increase around 30 percent in the oral environment due to the moisture and temperature changes. The wear resistance of the dental composites is also significantly affected by moisture and temperature changes in the oral conditions. It is observed that thermocycling has no significant effect on the hardness, plasticity index and wear resistance of the nanohybrid composite and the nanocomposite dental materials.

• Journal of Ecology and Environment
• /
• v.33 no.4
• /
• pp.299-306
• /
• 2010

The use of local seed provenance is often recommended in forest restoration. Early vigor is a combination of the performance of seed germination and emergence after planting. The ability of young Brant's oak plants to grow and develop after emergence and its dependence on local habitat conditions was investigated in this study. The effects of seed source and shade on early growing seedlings of Brant's oak (Quercus brantii L.) were determined in field measurements. Seeds of Quercus brantii L. were collected from 4 forest areas (seed sources) in southern Zagros (Provinces of Kohkilouyeh-Bouyer Ahmad and Fars) at altitudes of 850, 1,100, 1,500, 2,100 m a.s.l., and planted in a nursery constructed in southwestern Iran. According to a split-plot design consisting of four blocks, each containing two main treatment plots (no shading, partial shading), each main plot was sub-divided into four sub-plots (for elevations of 850, 1,100, 1,500 and 2,100 m). Results showed that shade treatments had significant effects on emergence percentage and rate, shoot length, shoot dry weight (SDW), root dry weight (RDW), leaf area (LA), and chlorophyll content. Ecological factors also had an effect on seed performance. Altitude of seed source had a very significant effect on root length, LA, SDW, and RDW. The seeds collected from 850 m a.s.l. elevation showed the highest performance, especially in leaf area, root length, shoot dry weight, and root dry weight. Our results showed that the altitude of 850 m a.s.l. was the best for collecting Brant's oak seeds.