• Journal of Fashion Business
• /
• v.22 no.4
• /
• pp.1-19
• /
• 2018

Unlike other ready-made suits, which are normalized based on aspects like, designs, materials, sewing methods, has to be worn for three years, designing and pattern development of school uniform depends greatly on satisfaction and appearance. Furthermore, school uniform is of importance as many teenagers spend most of their time at school. In the present work, an attempt has been made to suggest ideal school uniform for female middle school students based on their actual uniform conditions and design preferences, so that the demands of artistic aspect, and the requirements of a suitable uniform for a female teenager can be fulfilled. Initially, a survey about the actual wearing condition was held to figure out the actual uniform conditions and design preferences. Based on the result of the survey, two types of school uniform were made with different patterns. Finally, the most ideal school uniform for female middle school students was suggested based on the experiment involving a few aspects such as suitability and functionality. It is conjectured that school uniform survey and investigation, could provide useful information to the school uniform business market.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.1
• /
• pp.66-77
• /
• 1999

For this study It was measured the seam puckering based on the mechanical properties of tencel under the proper condition of needlework and machine sewing analyzed the mechanical properties which re influenced to the seam puckering and estimated the seam puckering based on the mechanical properties. The results of this study are as follows : There are three types of the seam puckering for each step which is caused by repeated washing and press. Concerning the seam puckering with the number of washing the more the number of washing is increased the less the seam puckering is decreased. Concerning the mecanical properties of the sample with the seam puckering. The seam puckering is related to LT positively B, 2HB, T, W negatively Among the mechanical properties LT, B, 2HB, T, W are most influenced to the seam puckering. Judging from the result of estimating seam puckering based on mechanical properties the estimate-formula is satisfied in this study.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.3
• /
• pp.353-360
• /
• 1999

An investigation made of the variations of angle of bias on the top of the sleeve cap curve line and calculated easing contraction ratio by capheights(A ; a,h$\times$5,/6) B: A, H/4 +4cm C:A.H/3 D: A.H/ 4+3cm E:AH/4+2cm, F: A,H/4+1cm, G: A,H/4, H:A,H/6, I:A,H/8) and the efects of easing contraction on the cap curve lines of sleeve A, D, G by easing stitch density with the gathering foot: sewing condition-lockstitch industrial machine stitch density(N1.0 ; 38stitches/3cm N1.5: 26stitches/3cm, N2.0 ; 19stitches/3cm, N2.5 ; 14stitches/ 3cm) The results obtained were as follows; 1) The variations of the angle of bias on the top of the sleeve cap curve line by cap heights can be done according to the angle balance (front; $\alpha$-$\beta$ back ; $\alpha$'- $\beta$') between the angle (front ;$\alpha$, $\beta$, back ; $\alpha$'- $\beta$') of bias of the two base-lines. 2) The higher cap height the more higher the calculated easing contraction ratio. 3) The lower the stitch density the higher easing contraction ratio. 4) The effects of easing contraction was that sleeve G was more than sleeve A, D.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.8 s.145
• /
• pp.1068-1078
• /
• 2005

The purpose of this study was to analyze the production process of 12 domestic companies that manufacture women's knitwear and the degree of satisfaction of the middle-anged women who purchase knitted Jacket. Three hundred questionnaires were distributed and a total of 276 usable data were coded for further statistical analysis including descriptive statistics (frequency and one way- ANOVA test) by using SPSSWIN 10.1. It was found that the price satisfaction of knitted jacket was low because of imported yarn and production methods(i .e., 1inking, sewing, etc.). Therefore, it is necessary to develop that domestic yam and improve production methods. Another finding ot the study demonstrated that the size of knitted jacket was a little tight for the middle-aged women on the circumstance size(i.e., bust, waist, etc.) while majority of the respondents felt that the areas such as sleeve and shoulder seemed a little bit longer than their size. It should be designed in such that the physical characteristics of knitted materials are considered when pattern is made. Clothing companies should make an effort to effort more information about the knitted jacket and develop pattern suitable for the body shape of the middle-aged women.

• Textile Coloration and Finishing
• /
• v.21 no.4
• /
• pp.11-22
• /
• 2009

This study surveys the optimum processing conditions of ATY for PET braiding for automotive hoses. For this purpose, high tenacity and low shrinkable PET filaments with three types of deniers are prepared. Twenty seven ATY specimens are manufactured with variation of feed speed and overfeed on the air jet texturing machine. The physical properties of various yam according to the ATY processing conditions are measured and analysed for deciding the optimum ATY processing condition. Two kinds of ATY filaments made under the optimum air texturing conditions are processed with variation of tpm, heat setting temperature and heat setting time on the 2-for-l twister and setting chamber, respectively. The optimum twisting and heat setting conditions are decided through analysis of the yam physical properties. Finally, the braiding fabric specimens are manufactured using conventional filament and newly developed filament made under optimum twisting and heat setting conditions. The bursting strengths of these braiding specimens are compared and discussed between two types of specimens.

• KIEAE Journal
• /
• v.10 no.4
• /
• pp.137-145
• /
• 2010

Active sunlighting systems have been applied to deliver sunlight into the indoor space where natural light is insufficient, mainly because of the congested high-rise buildings in urban areas. Among various active sunlighting systems, a mirror sunlighting system which is simple structure and economically reasonable has been widely used in different types of spaces such as underground, north facing place and atrium. This study was to evaluate the mirror sunlighting systems, which were consisted of the first mirror of $3.5m{\times}2.5m$, the eight sets of the second mirrors of $1.0m{\times}1.25m$ and a sun tracker. Ten sets of the systems were installed for 40 apartment living rooms, the configuration of $3.5m(W){\times}4.0m(D){\times}2.5m(H)$ where sunlighting were not possible due to high retaining walls located in the front of the living rooms. The 45 HOBO data logger sensors for the indoor illuminance were equipped and 2 Li-cor photometers for outdoor illuminance. Both indoor and outdoor horizontal illuminances were monitored every second from 9am to 3pm on 17 January 2010 under clear sky condition. The results showed that the indoor illuminance of installed mirror sunlighting system was significant relationship with outdoor illuminance and increased the indoor illuminance level by 4.2 times on the whole floor space, by 8 times on the sun patch space of 6m2 and even by 2 times on the no sun patch space. In addition, the luminous conditions of the living room under real sky conditions met the KS recommendation for difficult task (600-1000-1500 lux) such as sewing and reading on whole floor space and sun patch space. It was proved that the benefits of mirror sunlighting systems included an effective technology for penetrating daylight into indoors where sunlighting was not possible and improving occupants' satisfaction and health, and contributing to energy saving in apartments during daytime.

• Fashion & Textile Research Journal
• /
• v.17 no.6
• /
• pp.1013-1019
• /
• 2015

As the interest in leisure and health increases, the domestic outdoor wear industry becomes bigger. The waterproofness of fabrics does not ensure the waterproofness of garments because of the stitch holes during the sewing process even with the seam sealing tapes. Thus the water leakage often becomes a problem during the end use. Still companies use fabrics waterproofness data for garments marketing because they are simple to run the test, less expensive than the whole garment testing, and easy to achieve the quality control. In this study the rain tower system for evaluating the waterproofness of garments has been developed and the waterproofness of the selected waterproof and breathable garments in the market were tested. The rain tower was consisted of rain tower room, rainfall forming system and measurement system. Two different levels of rainfall can be simulated with this system(100l/m²/hr and 450l/m²/hr). Jackets in the market have been tested at two different rainfall conditions. The temperature and humidity data inside jackets didn't provide much information on the waterproofness at severe rainfall condition(450l/m²/hr, 1 hour). However, water leakage was detected on the cotton undershirt inside jacket. 5 out of 8 jackets passed the normal rainfall condition(100l/m²/hr, 30 minutes). The newly developed rain tower system was able to evaluate the waterproofness of the jacket seams. It is recommended the further study on the detailed test conditions for the end use of the waterproof and breathable garments.

• Fashion & Textile Research Journal
• /
• v.8 no.1
• /
• pp.123-128
• /
• 2006

For the purpose of examining the relationship of physiological and subjective responses to different exercise intensities and varied types of sportswear material, under environmental condition $20{\pm}1^{\circ}C$ $50{\pm}3%$RH, five men who wear four different kinds of sportswear which have same clothing cover area. The subjects exercised for 20 min with a 20 min pre-exercise rest period and another 20 min post-exercise recovery period. Throughout the 60 min. duration, we monitored the local skin temperature, rectal temperature, clothing microclimate and subjective sensation. The mean skin temperature was recorded to range from $33.5{\sim}34.1^{\circ}C$ for the entire duration of the experiment with the highest temperature observed at the 7th min after starting the exercise. During the exercise intensity at THR 20, the lowest recorded temperature was at the 5th min of the recovery time and stabilized at the 10th min. However, in the exercise intensity condition at THR 70, the temperature declined steadily until the end of the experiment. With regard to clothing materials, cotton 100% and Polyester/Cotton blended fabrics knit(35/65) was $0.5{\sim}0.7^{\circ}C$ maintained lower than Polyester 100% and polyester/Cotton blended woven fabrics (65/35). In the case of the rectal temperature at THR 70 in case of PET 100%, Polyester/Cotton blended woven fabrics (35/65) was higher $0.2{\sim}0.5^{\circ}C$ than other sportswear throughout the duration of the experiment.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.3
• /
• pp.161-176
• /
• 2012

This study aims to find out the influence of satisfaction of the product and shopping mall attributes on mall reliability, repurchase intention, and recommendation intention in internet open market. For this purpose, this study surveyed 266 male and female consumers in their 20's~40's for empirical analysis who have ever purchased clothing through internet open markets. Respondents are selected using the convenience sampling through online survey in August 2011. For statistical analysis, descriptive statistics, reliability analysis, factor analysis, t-test, ANOVA, and regression analysis are carried out using SPSS for Windows 12.0. The results are as follows; First, it was identified that there were Significant differences in consumers' satisfaction on product and shopping mall attributes according to purchase price, degree of purchase, and the demographics. Second, it was identified that performance, sewing condition, the stability of the form, texture, harmony with other clothes, the response of people, fashionability, seller, origin, detailed explanation on products, interaction with shopping malls, and ease-of-use have significant influence on the reliability of open market. Third, it was identified that easiness to be active in, the stability of the food, design, suitability to T.P.O, price, origin, detailed explanation on products, product assortment, reputation of shopping malls, ease-of-use, and delivery charge policy have significant influence on the repurchase intention. Fourth, it was identified that easiness to be active in, the stability of the form, design, suitability to T.P.O, price, origin, detailed explanation on products, product assortment, reputation of shopping malls, ease-of-use, and delivery charge policy have significant influence on the intention to recommend.

• Journal of Fashion Business
• /
• v.13 no.5
• /
• pp.37-44
• /
• 2009

As the modern society has become highly industrialized and functionalized, the entry of women in public affairs has become brisk and extensive, and the studies of jackets which can satisfy the functions and designs for various activities have become important. Especially in the tailored collar which is the typical collar for female jackets, the studies such as scientific original form design, and design evaluation through analyzing functionality and sensitivity and others must be systematically carried out. In this study, therefore, the objective was placed in examining the actual state of the production of the tailored collar in the field of production first, and inquiring the general theories on the constituent elements of tailored-collar and production methods by analyzing it and comparing it with the educational tailored-collar production methods. First, in regard to the relation between the collar and the length of the backside neck of the bodice, in most cases, they were employing the method to enlarge the length of the backside neck of the bodice by shortening the length of the neck-base girth. That is, they were processing in order that the self collar band inside of the roll line and the fall of the collar can make a soft curved line. Second, when producing tailored-collar patterns, it is desirable to very the inclination according to the breath of the collar or thickness of the fabric because the stability of the inclination of the collar differs depending on the condition the collar is set, the girth of the collar edge. the broader the breath of the collar becomes, the thicker the fabric becomes, and the more the cloth is against the cold, it is necessary to make the inclination larger. Third, in the size relation between the upper collar and under collar, when sewing collars, it becomes thick and stabilized as it goes from the part in which extra pieces were put to the part in which extra pieces are not put. So you must make the upper collar larger by putting in extra pieces. The amount to be put in differs depending on characteristics of the materials.