• 제목/요약/키워드: sewer systems

검색결과 110건 처리시간 0.021초

연속 강우-유출 모의기법을 이용한 최적 CSOs 산정에 관한 연구 (A Study of Optimal-CSOs by Continuous Rainfall/Runoff Simulation Techniques)

  • 조덕준;김명수;이정호;김중훈
    • 한국물환경학회지
    • /
    • 제22권6호
    • /
    • pp.1068-1074
    • /
    • 2006
  • For receiving water quality protection a control systems of urban drainage for CSOs reduction is needed. Examples in combined sewer systems include downstream storage facilities that detain runoff during periods of high flow and allow the detained water to be conveyed by an interceptor sewer to a centralized treatment plant during periods of low flow. The design of such facilities as storm-water detention storage is highly dependant on the temporal variability of storage capacity available as well as the infiltration capacity of soil and recovery of depression storage. For the continuous long-term analysis of urban drainage system this study used analytical probabilistic model based on derived probability distribution theory. As an alternative to the modeling of urban drainage system for planning or screening level analysis of runoff control alternatives, this model has evolved that offers much ease and flexibility in terms of computation while considering long-term meteorology. This study presented rainfall and runoff characteristics of the subject area using analytical probabilistic model. Runoff characteristics manifested the unique characteristics of the subject area with the infiltration capacity of soil and recovery of depression storage and was examined appropriately by sensitivity analysis. This study presented the average annual CSOs, number of CSOs and event mean CSOs for the decision of storage volume.

연속 맨홀에서의 손실계수 산정 (An Estimation of Head Loss Coefficients at Continuous Circular Manhole)

  • 윤영노;김정수;한정석;윤세의
    • 한국방재학회:학술대회논문집
    • /
    • 한국방재학회 2008년도 정기총회 및 학술발표대회
    • /
    • pp.731-734
    • /
    • 2008
  • Urban sewer systems are designed to operate in open-channel flow regime and energy loss at circular manholes are usually not significant. However, the energy loss at manholes, often exceeding the friction loss of pipes under surcharge flow, is considered as one of the major causes of inundation in urban area. Therefore, it is necessary to analyze the head loss associated with manholes, especially in surcharge flow. Hydraulic experimental apparatus with two circular manholes was installed for this study. The range of the experimental discharges were from $1.0\ell/sec$ to $4.4\ell/sec$. Head loss coefficient was maximum because of strong oscillation of water surface when the range of manhole depth ratios$(h_m/D_{in})$ were from 1,2 to 1.25. The average head loss coefficients for upstream manhole and downstream manhole were 0.58 and 0.23 respectively. Head loss at upstream manhole is nearly 2.5 times more than one at downstream manhole.

  • PDF

광역시 GIS의 구축현황 및 방향에 관한 연구 (A Study on Implementation and Direction of the Metropolitan Cites' GIS)

  • 오종우
    • 한국디지털정책학회:학술대회논문집
    • /
    • 한국디지털정책학회 2005년도 춘계학술대회
    • /
    • pp.215-229
    • /
    • 2005
  • The purpose of this study is to analyses 7 metropolitan cites on the urban facility data rather than application systems including water, sewer, and roads and to present the best way to reconfigure of the geospatial data in Korea. Data were mainly compiled from the 2nd NGIS(National Geographic Information Systems: 95-00) because the GIS data of this study is relatively important to generate favorable results due to their data precisely examinate by the 1st NGIS evaluated results. In results, GIS data and invested budget of the Seoul metropolitan government were not only covered 25 distracted areas of the fields, but also were overwhelming other six metropolitan government invested budget. Relatively the Daejeon metropolitan government had least invested budget resulted in Jess geospatial data than others. In particularly there were serious geospatial data error occurred even though geospatial data of the urban infrastructures like water, sewer, and roads including the national infrastructure like elec., comm., heat, oil pipes, and gas were facilitated with human habitants, gas and elec. had very high error data nearly two times high than the permitted error in 30cm. Therefore, this paper exhibited a LiDAR technology to regenerate high accuracy geospatial data of the metropolitan governments because of the new technology's extremely accuracy in 20cm in horizontal scale in fields.

  • PDF

동력학적 수리해석모델 해석을 통한 하수관거능력 평가 (Evaluation of Sewer Capacity using Kinetic Hydraulic Model)

  • 양해진;전항배;손대익;이준
    • 상하수도학회지
    • /
    • 제23권5호
    • /
    • pp.565-572
    • /
    • 2009
  • Hydraulic modeling is widely used to simulate wastewater flow. The simulated models are used to prevent flood and many other problems associated with wastewater flow in planning or rehabilitating sewer systems. In this study, MAKESW (An engineer, South Korea), MOUSE (DHI, Denmark), and SWMM (XPSoftware, USA) are used to for hydraulic modeling of wastewater in C-city, South Korea and E-city, Iraq. These modeling tools produced different results. SWMM comparably overpredicted runoff and peak flow. In using SWMM, use of accurate data with a high confidential level, detail examination over the target basin surface, and the careful selection of a runoff model, which describes Korea's unique hydraulic characteristics are recommended. Modification of existing models through the optimization of variables cannot be achieved at this moment. Setting up an integrated modeling environment is considered to be essential to utilize modeling and further apply the results for various projects. Standardization of GIS database, the criteria for and the scope of model application, and database management systems need to be prepared to expand modeling application.

하수관거내 오염물질 성상변화 특성 (Characteristics of Transformation Process of Wastewater in Sewer)

  • 이두진;김문일
    • 대한환경공학회지
    • /
    • 제27권9호
    • /
    • pp.911-916
    • /
    • 2005
  • 본 연구에서는 하수가 관거를 유하하면서 물리, 화학, 생물학적 반응을 통하여 오염물질이 제거되는 특성을 평가하기 위하여 실제 관거를 대상으로 상, 하류수질변화를 분석하고 관거 퇴적물의 입경변화와 오염물함유량을 평가하였다. 상류와 하류가 2.4 km 떨어진 두 지점에서 24시간 연속 채취된 시료에 대한 DOC 분석결과 상하류의 농도차이는 $-5.8{\sim}18.6\;mg/L$의 범위를 보였다. 상류측 평균 DOC농도를 기준으로 8.4%가 감소하였으며, 관거길이당 감소율은 2.3 mg/L/km, 평균체류시간에 의한 감소율은 0.093 mg/L/min으로 나타났다. SS의 경우 상류와 하류간의 수질차는 $-10.5{\sim}34.6\;mg/L$, 평균 SS 농도차는 13.3 mg/L, 상류수질을 기준으로 10.4%정도 감소하였으며 관거길이당 감소율은 5.5 mg/L/km, 평균체류시간에 의한 감소율은 0.22 mg/L/min으로 DOC에 비하여 약 2배 정도 높은 감소율을 나타내었다. 침입수/유입수를 고려하여 DOC, SS의 누적오염부하를 비교한 결과, DOC의 경우 일누적오염부하를 기준으로 상류 1,230 kg/d, 하류 1,167 kg/d으로 5.2%가 감소하였고, SS의 경우 상류 2,371kg/d, 하류는 2,186 kg/d로 7.8% 감소하였다. 이러한 결과는 하수를 처리장까지 수송하튼 관거시스템내에서 오염부하의 일부가 제거되고 있음을 보여주는 것이며, 하수처리장의 설계 및 운영시 관거를 통한 감소영향을 고려하는 것이 필요함을 알 수 있다.

GIS를 이용한 도심지 Nonpoint Source 오염 물질의 평가연구 (Urban Nonpoint Source Pollution Assessment Using A Geographical Information System)

  • 김계현
    • Spatial Information Research
    • /
    • 제1권1호
    • /
    • pp.39-53
    • /
    • 1993
  • 지리 정보시스템(Geographical Information System)을 이용하여 도심지 Non Pount Source오염 물질의 양이 오염원 종류별로 확인되고 적절하한 오염감소를 위한 대책이 마련되었다. 경험에 의한 공해물질 예측모델을 운용하기 위한 모든 입력 자료들이 도심지의 거리 구획별(Street block)별로 제공되어 각 거리 구획별 오염량이 계산되었다. 계산된 오염량은 각 우수 배출구별로 합산되어 오염량이 많은 지역이 판명되었다. 또한 오염량을 줄이기 위하여 인공호수를 만들기 위한 적지분석이 수행되었으며, 그에 따른 비용분석이 이루어졌다. 본 연구는 지형정보시스템의 도심지 공해연구에의 기여도를 입증시켜 주었다.

  • PDF

도시 내배수시스템 실시간 운영모형의 개발 (Development of a Real Time Control Model for Urban Drainage Systems)

  • 전환돈;이양재;이정호;김중훈
    • 한국물환경학회지
    • /
    • 제23권5호
    • /
    • pp.748-755
    • /
    • 2007
  • To develop an efficient pump operating rule for a retard basin, it is necessary to estimate inflow to the retard basin accurately which is affected by the backwater effect at the outlet of the conduit. The magnitude of the backwater effect is dependent on the water depth of a retard basin; however, the depth is determined by the amount of inflow and outflow. Thus, a real time simulation system that is able to simulate urban runoff and the pump operation with the consideration of the backwater effect is required to estimate the actual inflow to a retard basin. With this system, the efficient pump operating rule can be developed to diminish the possible flood damage on urban areas. In this study, a realtime simulation system is developed using the SWMM 5.0 DLL and Visual Basic 6.0 equipped with EXCEL to estimate inflow considering the backwater effect. The realtime simulation can be done by updating realtime input data such as minutely observed rainfall and the depth of a retard basin. Using those updated input data, the model estimates actual inflow, the amount of outflow discharged by pumps and gates, the depth of each junction, and flow rate at a sewer pipe on realtime basis. The developed model was applied to the Joonggok retard basin and demonstrated that it can be used to design a sewer system and to estimate actual inflow through the inlet sewer to reduce the inundation risk. As results, we find that the model can contribute to establish better operating practices for the pumps and the flood drainage system.

GIS를 이용한 도시지역 침수해석 (Urban Inundation Analysis by Applying with GIS)

  • 이창희;한건연;김지성
    • 한국지리정보학회지
    • /
    • 제9권2호
    • /
    • pp.115-126
    • /
    • 2006
  • 본 연구의 목적은 도시지역에서의 침수시뮬레이션에 필요한 도시침수해석모형을 개발하고, 이를 GIS(geographic information system)와 연계 운영할 수 있는 시스템을 구축함에 있다. 이를 위해서 미국환경보호청(EPA)의 SWMM(storm water management model)모형을 이용하여 도시지역 배수 시스템에서의 도시유역 유출량 및 월류량을 계산하고, 지표면으로 월류된 유량에 대해 GIS를 이용한 침수해석을 실시하였다. GIS를 이용한 침수해석 모형으로는 Level-Pool 침수해석모형과 DEM 기반 침수해석모형을 개발하고 도시지역에서의 시간별 침수위 및 침수범위 등을 계산 할 수 있게 하였다. 도시배수시스템과 지표침수해석모형을 GIS를 이용하여 통합시킨 도시침수해석 모형을 통해서 배수 시설에서의 유출량 예측과 지표면에서의 월류유량의 전파특성을 예측할 수 있도록 구성하였다. 본 연구결과는 도시지역에서의 배수 시설의 설계 및 운영의 문제, 침수 예상도의 작성 및 각종 홍수 예경보 수립에 기여할 수 있을 것으로 판단된다.

  • PDF

GIS와 VE, LCC 개념에 의한 동적 상수도관망 대안 결정 (Capacity Expansion Modeling of Water-distribution Network using GIS, VE, and LCC)

  • Kim, Hyeng-Bok
    • 한국GIS학회:학술대회논문집
    • /
    • 한국GIS학회 1999년도 추계학술대회 발표요약문
    • /
    • pp.21-25
    • /
    • 1999
  • Planning support systems(PSS) add more advanced spatial analysis functions than Geographic information systems(GIS) and intertemporal functions to the functions of spatial decision support systems(SDSS). This paper reports the continuing development of a PSS providing a framework that facilitates urban planners and civil engineers in conducting coherent deliberations about planning, design and operation & maintenance(O&M) of water-distribution networks for urban growth management. The PSS using dynamic optimization model, modeling-to-generate-alternatives, value engineering(VE) and life-cycle cost(LCC) can generate network alternatives in consideration of initial cost and O&H cost. Users can define alternatives by the direct manipulation of networks or by the manipulation of parameters in the models. The water-distribution network analysis model evaluates the performance of the user-defined alternatives. The PSS can be extended to include the functions of generating sewer network alternatives, combining water-distribution and sewer networks, eventually the function of planning, design and O&H of housing sites. Capacity expansion by the dynamic water-distribution network optimization model using MINLP includes three advantages over capacity expansion using optimal control theory(Kim and Hopkins 1996): 1) finds expansion alternatives including future capacity expansion times, sizes, locations, and pipe types of a water-distribution network provided, 2) has the capabilities to do the capacity expansion of each link spatially and intertemporally, and 3) requires less interaction between models. The modeling using MINLP is limited in addressing the relationship between cost, price, and demand, which the optimal control approach can consider. Strictly speaking, the construction and O&M costs of water-distribution networks influence the price charged for the served water, which in turn influence the. This limitation can be justified in rather small area because price per unit water in the area must be same as that of neighboring area, i.e., the price is determined administratively. Planners and engineers can put emphasis on capacity expansion without consideration of the relationship between cost, price, and demand.

  • PDF

도시 유역의 우수관망 통수능 개선을 위한 LID 기술 적용 연구 (A Study on Application of LID Technology for Improvement of Drainage Capacity of Sewer Network in Urban Watershed)

  • 백종석;김백중;이상진;김형산
    • 한국물환경학회지
    • /
    • 제33권6호
    • /
    • pp.617-625
    • /
    • 2017
  • Both domestic and overseas urban drainage systems have been actively researched to solve the problems of urban flash floods and the flood damage that is caused by local downpours. Recent urban planning has been designed to better manage the floods of decentralized rainfall-management systems, and the installation of green infrastructure and low-impact development (LID) facilities at national ministries has been recommended. In this study, we use the EPA SWMM model to construct a decentralized rainfall-management network for each small watershed, and we analyze the effect of the drainage-capacity improvement from the installation of the LID technologies in vulnerable areas that replaces the network-expansion process. In the design of the existing urban piping systems, it is common to increase the pipe size due to the increment of the impervious area, the steep terrain, and the sensitive entrance-ramp junction; however, the installation of green infrastructure and LID facilities will be sufficient for the construction of a safe urban drainage system. The applications of LID facilities and green infrastructure in urban areas can positively affect the recovery of the corresponding water cycles to a healthy standard, and it is expected that further research will occur in the future.