• Journal of Korean Society of Transportation
• /
• v.5 no.2
• /
• pp.55-72
• /
• 1987

The work analyzes the existing situation and defines special problems concerning traffic accidents in the two countries. The report is divided into three parts: 1) Using the global approach of SMEED, the data were evaluated using multiple regression analysis, and homogeneous groups of countries were defined by cluster analysis. In the global approach, the linear model is better than SMEED's non-linear model in explaining the number of fatalities. Among the different groups of countries, the linear approach was found to be better suited for industrialized countries and the non-linear approach better for the developing countries. T도 comparison of traffic fatality data for the Federal Republic the developing countries. The comparison of traffic fatality data for the Federal Republic of Germany and the Republic of Korea showed different regression equations during the same time period. 2) The BOX/JENKINS time series analysis on a monthly basis points out clearly similar seasonal patterns for the two countries over the years studied. The decrease in traffic accidents following the intensification of the safety belt requirement was proved in the ARIMA model. It amounts to 7 to 8 percent fewer personal injury accidents and fatal accidents. The identified increase in safety in the Federal Republic of Germany since the 1970s is mainly due to the reduction of accident severity in residential areas. 3) Speeds and headways on motorways in th3e two countries were also compared. The measurements point out that German road users drive faster, take more risks, and accept shorter time gaps than Korean road users. However, the accident statistics show accident rates for Korea that are several times higher than those in the Federal Republic of Germany.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.4
• /
• pp.178-185
• /
• 2023

Rapid urbanization and advancements in technology have led to a surge in the number of automobiles, resulting in frequent traffic accidents, and consequently, an increase in human casualties and economic losses. Therefore, there is a need for technology that can predict the risk of traffic accidents to prevent them and minimize the damage caused by them. Traffic accidents occur due to various factors including traffic congestion, the traffic environment, and road conditions. These factors give traffic accidents spatiotemporal characteristics. This paper analyzes traffic accident data to understand the main characteristics of traffic accidents and reconstructs the data in a time series format. Additionally, an LSTM-MLP based model that excellently captures spatiotemporal characteristics was developed and utilized for traffic accident prediction. Experiments have proven that the proposed model is more rational and accurate in predicting the risk of traffic accidents compared to existing models. The traffic accident risk prediction model suggested in this paper can be applied to systems capable of real-time monitoring of road conditions and environments, such as navigation systems. It is expected to enhance the safety of road users and minimize the social costs associated with traffic accidents.

• Journal of Chest Surgery
• /
• v.52 no.5
• /
• pp.372-375
• /
• 2019

A 55-year-old man was admitted to the trauma center after a car accident. Cardiac tamponade, traumatic aortic injury, and hemoperitoneum were diagnosed by ultrasonography. The trauma surgeon, cardiac surgeon, and interventional radiologist discussed the prioritization of interventions. Multi-detector computed tomography was carried out first to determine the severity and extent of the injuries, followed by exploratory sternotomy to repair a left auricle rupture. A damage control laparotomy was then performed to control mesenteric bleeding. Lastly, a descending thoracic aorta injury was treated by endovascular stenting. These procedures were performed in the hybrid-angio room. The patient was discharged on postoperative day 135, without complications.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.2
• /
• pp.1-11
• /
• 1994

The most commonplace of collisions that directly affect people is that of vehicles. Safety studies have noted a correlation between vehicle occupant injury severity and velocity changes. Methods for estimating collision velocity changes are discussed here. This topic is part of what is referred to as accident reconstruction. Only planar collisions are considered. When a vehicle collides with another, impact dynamics with friction should be considered. This paper presents a general analysis methodology of impact. must dynamics incorporating friction. The presence of friction between sliding contacts during the impact makes the problem difficult since the events such as reverse sliding or sticking, which may occur at different times throughout the impact, must be determined. This paper uses the results of RICSAC experiments for verifying the developed methodology. The analysis and experimental results agree well.

• Journal of the Korean Society of Safety
• /
• v.24 no.6
• /
• pp.7-12
• /
• 2009

This study focuses on the classification of fire equipments for certification based on the risk evaluation. In general, known statistics on fire equipment-related accidents needs to be used for risk evaluation. When statistics is not available, however, expected frequency and severity of accident for individual equipment can be taken into account in evaluating the related risks. Based on the level of inherent risks, each equipment is then classified into three categories for certification. For equipments that risk evaluation is not possible, characteristics of those products such as reliability are considered for classification. Once classified, each equipment is assigned an appropriate certification module.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.5
• /
• pp.41-47
• /
• 2010

For the enhancement of structural safety of thermally damaged reinforced concrete structure, rapid evaluation of damage in the structure is very important. This study addresses a simplified method which is equivalent to the standard fire curve (ISO 834) for the residual bond strength evaluation. In the proposed method, a exposure duration as well as the maximum temperature can be considered. For the comparisons with conventional methods, concrete properties obtained from the report of Daegu subway fire accident were referred and the results support the applicability of the proposed method in this study.

• Journal of Auto-vehicle Safety Association
• /
• v.6 no.2
• /
• pp.23-28
• /
• 2014

Commercial vehicle ESC assessment for curvature road was conducted. The previous study of ESC activation condition for losing controllability utilizing the test protocols of double lane change and sine with dwell method was conducted without considering the geometric complexity of roadway design. Since critical rollover accidents were frequently observed in the exit ramp zone, variety of curve, slope and bank have been added for analysis conditions. Detailed feature of the ramp including location, dimension and design characteristics have been analyzed from the typical trumpet type ramp design. Analyzing accident data from 2008, two specific ramps have been selected due to their complexity in design and severity in steering operation.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.2
• /
• pp.103-112
• /
• 2012

The construction industry in Korea after the Korean-war has evolved until these days. But the construction industry accident severity rate and frequency is over then the All industry rate. This study analyzed the 'Disaster Statistical Yearbook' of the Korea Occupational Safety and Health Agency, based on the factors that affect construction accidents that is selected and fined the some factors the construction Disaster Prevention Factors. This study will develop the methodology for analyzes that the national qualification is effected to the construction industrial machine disaster prevention status. It suggest two ways to the establishment of disaster trends. First way is the disaster quantitative analysis and second way is comparing the statistical data and the analysis of expert opinion.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2016.11a
• /
• pp.259-260
• /
• 2016

어린이의 경우 다른 연령층에 비해 신체적, 정신적으로 완성되지 못하여 교통사고의 가능성이 높으며, 특히 전국의 어린이 교통사고는 점진적으로 감소 추세이나 인천의 어린이 교통사고는 감소하다가 다시 증가 추세에 들어선 실정이다. 따라서 본 연구의 목적은 어린이 교통사고 심각도에 영향을 미치는 주요 요인들을 발견하고 제시하고자 하였다. 순서형 로지스틱 회귀분석을 활용하여 순서척도인 반응변수에 대한 설명변수의 오즈(Odds)를 확인하고자 하였으며 안전운전불이행, 차대사람(횡단중), 차대차(측면직각충돌)사고가 유의한 결과로 나타났다. 안전운전불이행으로 인한 사망사고와 기타사고의 오즈차이는 1.35배, 측면직각충돌로 인한 사망사고와 기타사고의 오즈차이는 1.76배 증가하는 것으로 나타났고, 횡단중인 경우에는 오히려 사망 위험도의 오즈값이 0.58배로 감소하는 것으로 나타났다.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.04a
• /
• pp.205-220
• /
• 2012

The construction industry in Korea after the Korean-war has evolved until these days. But the construction industry accident severity rate and frequency is over then the All industry rate. This study analyzed the 'Disaster Statistical Yearbook' of the Korea Occupational Safety and Health Agency, based on the factors that affect construction accidents that is selected and fined the some factors the construction Disaster Prevention Factors. This study will develop the methodology for analyzes that the national qualification is effected to the construction industrial machine disaster prevention status. It suggest two ways to the establishment of disaster trends. First way is the disaster quantitative analysis and second way is comparing the statistical data and the analysis of expert opinion.