• Journal of Korean Physical Therapy Science
• /
• v.9 no.3
• /
• pp.129-140
• /
• 2002

This study intended to find out how the handicapped use medical aid, their satisfaction at using it and so on. First a preliminary survey(Apr. 20$\sim$24, 2002) was made for the handicapped who had been cured for rehabilitation by wearing medical aid at hospitals and welfare center in Jeonbuk region. Then total 120 subjects were asked to fill out a standardized questionnaire from May 15$\sim$22, 2002. Out of total 95 questionnaires collected, 84 questionnaires were analyzed except for 11 cases unsuitable for the intention of this study. The results can be outlined as follows: 1. In general characteristic, it was found that the causes of disability included disease(35 respondents; 41.7%), traffic accident(23 respondents, 27.4%) and so on. In addition, 1st handicap comprised the majority(32 respondents; 58.2%) in handicap grade and ankle foot orthosis(or b-k orthosis) was most often used as medical aid(28 respondents: 33.3%) 2. In particular, it was also shown that the 1st handicap mainly resulted from traffic accident(15 respondents, 27.3%) and post-disease disability (11 respondents, 20.0%). They wore medical aid for 1 year or less on the average, because they were hospitalized for cure, which showed statistically significant level(P<0.05). 3. It was found that total 69 respondents(82.1%) were more or less satisfied with their medical aids depending on the causes of disability, and total 46 respondents(83.6%) were satisfied with their aids according to their handicap grade, but there were no statistical significance. 4. Total 56(66.7%) respondents answered that they would purchase medical aid on their own expenses, when they became handicapped. And the price of medical aid ranged from $\300,000{\sim}400,000$(25 respondents: 29.8%) to \ 500,000 or more(24 respondents: 28.6%). It means that they purchased more or less expensive medical aid on their own expenses, which showed statistical significance(P<0.05). 5. If there was any failure of medical aid, 9 respondents(37.5%) answered that they would be serviced from medical companies, and 7 respondents(29.2%) would be serviced from medical aid manufacturers. Most respondents were serviced for their medical aids from related companies. For the question about the causes of dissatisfaction upon repair service, 11 respondents(45.8%) answered that existing service company provided unskilled repair services and other respondents answered that there was no spare part or higher service expenses than they thought. These answers had the statistical significance(P<0.05). However, 20 respondents(79.2%) answered that they were satisfied with the repair service, which means that most respondents are satisfied with the service. In view of the results as described above, it can be concluded that their handicap or disability results from disease or sequelae after traffic accident and most of the affected wear their own medical aid. In the future, it is required that the medical insurance should cover those medical aids, and the service for failed medical aids should be commissioned by technical serviceman to realize customized manufacture and repair service according to different causes so that the handicapped can enjoy more or less comfort and convenience in their daily lives without any extreme difficulty.

• Journal of Korea Game Society
• /
• v.9 no.6
• /
• pp.69-77
• /
• 2009

Game producers provide their products and service to users. But the need and desire of users change in many ways as time goes. But game Co. Ltd is difficult because of the capital and the technical identities for providing characteristic products and service etc. Specially, the FPS game which is popular among users is developed by game Co. Ltd as the maximum reflects desire of users, but is similarly developed in other companies FPS game by similar desire. This cannot accept from desire of a certain prospective customer furthermore, decrease of a loyalty customer and a new customer, and a company is difficult of market activity. Therefore, this research is to find of user's psychological needs by FPS game user after gaming on reusing intention and switching intention factors influencing. As the result, the intention of satisfaction and re-use for FPS game is 84.9%, the conversion intention to special force game is 9.6% and the conversion intention to the game of Sudden attack is 5.5%. It shows that desire of the user for certain games is changing.

• Informatization Policy
• /
• v.29 no.3
• /
• pp.61-81
• /
• 2022

This paper explores how the provided information from Enterprise Architecture (EA) affects the activities to for performing IT projects. The IT projects analyzed in this paper are projects to for developing and maintaining Korea Customs' UNI-PASS. This research was conducted based on surveys to demonstrate the effects of the information from EA on activities for IT projects. Information from EA is categorized into propriety, sufficiency and consistency. Activities for IT projects are defined as management, participation, communication, requirement management and human resource. Correlational analysis is used to measure the effects of the inf ormation on the defined activities. The analysis, which verifies the provided information by EA, does not have meaningful correlation with project management nor human resource. For public officials in charge, Sufficiency of the information produces a positive effect on decision making. For operation company, consistency of the information encourages utilization of the resources required for the project. This research suggests that strategies for performing IT projects with EA information that can support the verification of characteristic environments of each project and performance of vital activities required by the participants' roles will ensure the success of government IT projects.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.85-94
• /
• 2005

The purpose of this research is the activation proposal about the local design innovation center that was established as a national design policy For this proposal, I have to research about the established process of local design innovation center and then, I analyzed the present condition of local design innovation center for the promoting plan. As a result, we must establish three basic elements to activate the local design center. the first, we have to know the local characteristic. the second, we have to make up the management direction of local design center the third, we have to get the sympathy from the local administration and local people for the positive support. With above conditions, the local design innovation center have to arrange infra elements. (1) design developing facilities for the lending to the local designer, (2) professional designer for the developing of design industry, (3) program development for various activities, (4) the trend research for supply to local company, (5) design one stop service support, (6) the network foundation construction between design administration and design company for the active communication, (7) the innovation of design center for the benefit model, (8) the local design policy establishment with local administration, (9) the independent management of responsibility for the fulfillment For the promotion of the local design innovation center have to make efforts continually with below listed elements. 1. Design supporting for the local industry 2. Various design campaign for the spreading of public recognition about design 3. The supporting for design company and local company with established facilities and expensive equipments. 4. The construction of design information infra for local company 5. The development of new program about the connection between industry and university. 6. The development of local characteristic and local image innovation to make new local where we are.

• Journal of Korea Port Economic Association
• /
• v.38 no.1
• /
• pp.1-14
• /
• 2022

The change in the management environment of the logistics industry in the era of global competition is becoming an era in which customers choose companies. Differentiation from competitors through the provision of products and services suitable for customers As customers' choices change depending on their superiority, companies are constantly striving to receive or retain customers' choices. Ultimately, this competitive structure can be seen as the importance of long-term relationship building. Therefore, in this study, we examined how factors related to transaction characteristics performed by logistics companies for customer satisfaction in the transaction relationship between cargo companies and shippers affect performance and long-term transaction intentions. First, we derived the factors of logistics service, cost, logistics infrastructure, and company competency, which are transaction characteristics factors of a logistics company that must be specifically realized for customer satisfaction in transactions between logistics companies. Second, we analyzed how the transaction characteristics factors of a logistics company affect the company's performance, and finally, how the company's performance factors affect long-term transaction intentions. As a result of empirical analysis, there were no statistically significant results on the relationship between transaction characteristics and performance of logistics companies, which can be attributed to the small size of the logistics companies that were the sample. In other words, logistics companies that do not have sufficient capacity to provide services at low prices have no choice but to engage in constant bleeding competition. It can be seen that it reflects the characteristics of the industry. On the other hand, the relationship between corporate performance factors and long-term transaction intention was found to have a positive relationship. The higher the level of partnership with logistics companies and visible financial performance is, the higher the transaction will be in the future, and the more the transaction volume will be gradually increased. And even if it costs a little more, it can be seen that the intention to continue trading is greatly expressed.

• International Commerce and Information Review
• /
• v.4 no.2
• /
• pp.253-277
• /
• 2002

Nowaday, the advanced technology in information and communication has been leading the dramatic change of transaction paradigm expansion from physical basis to electronic one. As we know, financial services support most of financial exchange between two business parties. So the expansion of electronic transaction paradigm affects to every financial institutions which provide financial services. Thus, financial institutions have accepted e-Finance systems and providing internet financial services to live in the competition. The purpose of this study is to contribute the qualitative enhancement of its customer service, rapid diffusion and accurate strategy establishment for e-Finance industry in the user side. Through the literature review and factor and reliability analysis, this study selects six diffusion factors such as efficiency of perceived e-Finance, reliability and safety of e-Finance in perceived e-Finance itself's characteristic; confidence, technical factors and the customer service quality of e-Finance system in perception on e-Finance System; inclination to innovation in the personal characteristic. According to result of hypothesis verification by using logistics regression analysis, technical factors and the customer service quality of e-Finance system in perception on e-Finance System and inclination to innovation in the personal characteristic gave statistically positive effect to the diffusion decision at the significant level 0.05 and 0.01. However efficiency of perceived e-Finance, reliability and safety of e-Finance in perceived e-Finance itself's characteristic didn't affect to diffusion decision and confidence of e-Finance system in perception on e-Finance System didn't have any statistical significancy. This study can be used as a basic material for the forward empirical study of diffusion factors in the user side and be able to apply to company and government policy making or embodiment, determination for customer service quality degree of financial institutions. But this study has some limitations like didn't touch satisfaction factors and its effect, only deal domestic customers and didn't use multi-regression analysis.

• Journal of the Korean Home Economics Association
• /
• v.50 no.7
• /
• pp.81-96
• /
• 2012

The purpose of this study is to understand consumer values derived from products by the contemporary consumers, as the meaning of a product is extended from the functional utilities to the mediums of fulfilling consumer values. Consumer values have been researched from the marketers' perspectives and, thus, the scales to measure consumer values tend to be too abstract and not always reflective of the consumers' perspectives. Holbrook's typology of consumer values is utilized and the products are classified into four groups according to the product characteristic of the utilitarian versus hedonic, and the consumption spaces of the indoor and outdoor. The findings are as follows. First, the values of efficiency, excellence, ethics, and spirituality are more likely derived from utilitarian products, while the value of play is more likely derived from the hedonic products. Second, the values of efficiency, excellence, and ethics are more likely derived from the indoor products, and values of playfulness, esthetics, status, and respect are more likely derived from the outdoor products. Third, the most frequently mentioned values are the efficiency, playfulness, and status. Fourth, the list of products answered as being representative for four types of products are short to include obvious products such as TV, mobile phone, computer, car, refrigerator, and MP3 player. Both the utilitarian and hedonic values are derived from TV, computer, and mobile phone, while the utilitarian value from refrigerator and car, and the hedonic value from MP3 player, digital camera, and game consoles. The results imply that consumer values should be carefully understood and reflected in developing new products in order to successfully fulfill consumers' underlying needs and requirements.

• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.143-148
• /
• 2015

A new Dianthus cultivar 'URI 2010-6' was selected among F1 progenies from a cross between interspecific hybrid 'Evergreen Emerald' as the seed parent and D. chinensis ' Ruby' as the pollen parent. In 2007, the cross w as made, and the seedlings of $F_1$ progenies were obtained and investigated. After three rounds of characteristic evaluation from 2008 to 2010, a clone was selected and registered as 'URI 2010-6' at the Korea Seed and Variety Service (plant variety protection number: 4431) in 2011. The flower of 'URI 2010-6' is caryophyllaceous, single type, and mainly bright red (Red, N79C) with secondary white (White, N155C) on the edge or as spots on the petal. The flower has diameter of 2.7 cm and length of 0.8 cm. This cultivar blooms continuously about 150 d on average and may be used as evergreen plant during winter months.

• Korean Journal of Metals and Materials
• /
• v.46 no.10
• /
• pp.672-682
• /
• 2008

The resistance spot welding of TRIP590 steels was investigated to enhance understanding of weld fracture during tensile-shear strength (TSS) test. The main failure modes for spot welds of TRIP590 steels were nugget pullout and interfacial fracture. The peak load to cause a weld interfacial failure was found to be related to fracture toughness of the weld and the weld diameter. Although interfacial fracture occurred in the samples, the load carrying capacity of the weld was high and not significantly affected by the fracture mode. Substantial part of the weld exhibits the characteristic dimple (or elongated dimple) fractures on interfacial fractured surface, in spite of the high hardness values associated with the martensite microstructures. The high load-bearing ability of the weld is directly associated with the area of ductile fracture occurred in weld. Therefore, the judgment of the quality of resistance spot welds in TRIP590 steels, the load carrying capacity of the weld should be considered as an important factor than fracture mode.

• Journal of Internet Computing and Services
• /
• v.23 no.1
• /
• pp.11-17
• /
• 2022

Data mining is the task of accessing useful information from a large capacity of data. It can also be referred to as searching for correlations that can provide clues about the future in large data warehouses by using computer algorithms. It has been used in the tourism field for marketing, analysis, and business improvement purposes. This study aims to analyze the tourist profile in Turkey through data mining methods. The reason relies behind the selection of Turkey is the fact that Turkey welcomes millions of tourist every year which can be a role model for other touristic countries. In this study, an anonymous and large-scale data set was used under the law on the protection of personal data. The dataset was taken from a leading tourism company that is still active in Turkey. By using the k-means clustering algorithm on this data, key parameters of profiles were obtained and people were clustered into groups according to their characteristics. According to the outcomes, distinguishing characteristics are gathered under three main titles. These are the age of the tourists, the frequency of their vacations and the period between the reservation and the vacation itself. The results obtained show that the frequency of tourist vacations, the time between bookings and vacations, and age are the most important and characteristic parameters for a tourist's profile. Finally, planning future investments, events and campaign packages can make tourism companies more competitive and improve quality of service. For both businesses and tourists, it is advantageous to prepare individual events and offers for the three major groups of tourists.