• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1141-1146
• /
• 2011

In this paper, an adaptive RFID tag antenna in 900MHz for using in inadequate electromagnetic environment is designed and implemented. The dimension of the proposed passive tag is $102mm{\times}102mm{\times}9mm$, the operating frequency band is 908~914MHz and the detection range is 5.1m. This paper describes the development of the thermal, water and impact resisting tag. The implemented tag can be used for the inadequate environment such as in-built tag on the ground for the car management service.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.177-179
• /
• 2009

It is increased that need of broadband multimedia service to make useful environment for user and to support the operation of railway system. So study of integrated data transmission in a subway and railway is activated. The research deals with pass loss characteristics of 18GHz microwave that is assigned frequency of integrated data transmission in a subway and railway. It is used sample integrated transmission system in subway and railway of KRRI(korea railroad research Institute) at the tunnel and road. Specification of test sample system is blow. It use OFDM modulation, Wireless frequency is 18GHz and 19GHz, Maximum output power is 20dBm, Receive sensitivity is -90dBm. The pass loss exponent and standard variation of road and tunnel is analyzed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.554-557
• /
• 2010

Pay Per Drive System can be a new solution for improving the traffic congestion and air pollution by not only taxing on the driving distance but also taxing different proportion with driver' s location and time. Thus it gives us new concept of the area and time of traffic jam, as a result, we can find a natural and efficient transportation mechanism and reduced air pollution. Also this system can trace the driver' s location by GPS, it can provide Black Box function on every car on the road. We propose the method of advanced transportation service by Pay Per Drive System.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.4
• /
• pp.137-143
• /
• 2014

Car exhaust emissions are recognized as one of the key sources for climate change and electric vehicles have no emissions from tailpipe. However, the limited charging infrastructures could restrict the propagation of electric vehicles. The purpose of this study is to find the vulnerable districts limited to the charging station services after meeting the goal of Ministry of Knowledge Economy(12%). We assumed that the charging service can be provided by current gas stations. The range of the vulnerable grades was determined by the accessibility to current gas stations and the vulnerable regions were classified considering the optimal number of charging stations estimated by the efficiency function. We used 4,827 sub-municipal divisions and 11,677 gas station locations for this analysis. The results show that most of mountain areas are vulnerable and the fringe areas of large cities generally get a good grade for the charging infrastructure. The gangwon-do, jeollanam-do, gyeongsangbuk-do, and chungcheongnam-do include more than 40% vulnerable districts.

• Journal of Korean Society of Transportation
• /
• v.7 no.2
• /
• pp.89-111
• /
• 1989

This study concentrates on a basic investigation research related to some of parameters to be used for the analysis of capacity and the level of service for signalized intersections. The parameters to be studied are ideal saturation flow rate, large vehicle's passenger car equivalent(PCE) ane the lane utilization factors of through and left turn vehicles. The field data were collected at six intersections in Seoul using video cameras so as to reflect conditions in urban areas. In this study discharge headway based on a rear bumper of each vehicle was used and all the parameters were estimated using a regression technique. The findings of this research are as follows : 1. The saturation headway and saturation flow rate on a single lane with the lane width of 3.1m are 1.652 seconds and 2,180 pcphgpl. It was found that the frist 5 vehicles in the queue experience some start-up lost time. 2. It was confirmed that the new method adopted for the estimate of large vehicle's PCE gives larger PCE values than those derived from the method commonly used. 3. For the estimate of lane utilization factors of through and left turn vehicles, a relationship was established and the corresponding formulas were developed.

• Journal of Information Technology Services
• /
• v.14 no.4
• /
• pp.269-281
• /
• 2015

The objective of this study is offering new on line business model for automotive market. In order for the research aim, we conduct direct in-depth interviews with CEO, including analysis of business patterns on eight automotive firms in Gwangju city. As a result, we suggest new business model so called, Online to offline (o2o) that combines advantages in both off-line and on-line business. Techniques that o2o automotive companies may employ include in-store pick up of items purchased online, allowing customers. Purchasing the automotive is not only a car but also services including insurance, warrant services. o2o business model suggested shows the operating of the goods and service sale. When it comes to characteristics of automotive conventional sale patterns, utilization of the online-to-offline commerce has not eliminated the advantages that e-commerce companies have. That model can enhance the new values for customers as well as new market creation. Also, this new business model (o2o) can contribute the emerging industry business model installed based in particular, emergence of Iot (Internet of thing) in terms of sharing knowledge and information between enterprise and customers.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.267-272
• /
• 1999

The auxiliary power supply system fur passenger service of railway car has been developed from MA(Motor-Alternator) to CVCF Inverter (Static Inverter). Generally, a customer wants to apply tile new control method and device for auxiliary power supply of railcar However, if the auxiliary power supply is supplied to extended existing line, the maintenance cost of the old system is less expensive than new developed system, so, the customer specifies that the auxiliary power supply has compatibility with existing one completely. At that time, the hardware is nearly same as existing system except small changes of accessories for better performance. This paper describes the flicker control using feed-forward method of auxiliary power supply system for new 50 electric railcars, which are delivered to Korean National Railroad (KNR) Kwa-chon Line. The existing power supply system has damping resistor box to stabilize the DC input (1.5 ㎸). At this time, for better system efficiency the new system has not include resistor box but new control method including feed-forward control is applied. This control algorithm realizes the better stabilization of input power compared to the result of the existing system, which includes resistor box

• International Journal of Railway
• /
• v.8 no.1
• /
• pp.15-20
• /
• 2015

As a result of the current population concentrations in urban centers, demand for intercity transportation is increasing rapidly. Railway transportation is becoming popular as an intercity transportation because of its timely service, travel speeds and transport efficiency. Among the many railway systems, the innovative and environmentally friendly maglev system has been rated very highly as the next-generation intercity railway system. Linear induction motors are widely used for the propulsion of maglev trains because of their light weight and low construction costs. The urban maglev that was recently completed in Incheon airport site employs a 110km/h class linear induction motor. However, this system was designed to meet requirements for inner-city operations and is not suitable as an intercity transportation system, which requires medium to high speeds. Therefore, this study deals with the characteristics and designs of linear induction motors used for the propulsion of maglev trains that can be used as intercity trains. Rail car specifications for high-speed trains have been presented, and the characteristics of linear induction motors that can be used for the propulsion of these trains have been derived using the finite element method (FEM).

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.2
• /
• pp.43-52
• /
• 2019

The recent technological developments of smart devices, multiple services are provided to enhance the users' quality of life including smart city, smart energy, smart car, smart healthcare, smart home, and so on. Academia and industries try to provide the users with convenient services upon seamless technological research and developments. Also, whenever and wherever a variety of services can be used without any limitation on the place and time upon connecting with different types of devices. However, security weaknesses due to integrations of multiple technological elements have been detected resulting in the leakage of user information, account hacking, and privacy leakage, threats to people's lives by device operation have been raised. In this paper, safer communication framework is suggested by device control and user authentication in the mobile network environment. After implementations of registration and authentication processes by users and devices, safe communication protocol is designed based on this. Also, renewal process is designed according to the safe control of the device. In the performance evaluation, safety was analyzed on the attack of protocol change weakness occurred in the existing system, service halt, data leakage, illegal operation control of message, and so on, which confirmed the enhanced speed approximately by 8% and 23% in the communication and verification parts, respectively, compared to the existing system.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.159-163
• /
• 2019

The food service industry has been grown due to improvement of living standards. In addition, the demand for frozen food delivery is increasing day by day at online/offline and the refrigerated vehicles are used in most of these food distributions. One of the most important factors in a refrigerated car is to measure the temperature accurately. Conventional temperature recording systems are generally connected directly to temperature sensor modules. Since the temperature data are transmitted to the temperature recorder by using the electric wire, there is a disadvantage that the resistance error must be compensated according to the cable length. In this paper, we propose a method to correct errors due to cable resistance using digital processing and CAN (Controller Area Network) communication. We use PT-1000 platinum sensor to increase the accuracy of the temperature measurement.