• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.9
• /
• pp.675-684
• /
• 2009

Internet worm can cause a traffic problem through DDoS(Distributed Denial of Services) or other kind of attacks. In those manners, it can compromise the internet infrastructure. In addition to this, it can intrude to important server and expose personal information to attacker. However, current detection and response mechanisms to worm have many vulnerabilities, because they only use local characteristic of worm or can treat known worms. In this paper, we propose a new framework to detect unknown worms. It uses macroscopic characteristic of worm to detect unknown worm early. In proposed idea, we define the macroscopic behavior of worm, propose a worm detection method to detect worm flow directly in IP packet networks, and show the performance of our system with simulations. In IP based method, we implement the proposed system and measure the time overhead to execute our system. The measurement shows our system is not too heavy to normal host users.

• Wind and Structures
• /
• v.20 no.6
• /
• pp.739-749
• /
• 2015

Field measurement of wind characteristics is of great significance for the wind engineering community. High-frequency anemometers such as ultrasonic anemometers are widely used to obtain the high-frequency fluctuating wind speed time history. However, conventional instrumentation systems may suffer from low efficiency, non-real time transmission and higher maintenance cost, and thus are not very appropriate in the field measurement of strong winds in remote areas such as mountain valleys. In order to improve the field measurement performance in those remote areas, a wireless high-frequency anemometer instrumentation system for field measurement has been developed. In this paper, the architecture of the proposed instrumentation system, and measured data transmission and treatment will be presented firstly. Then a comparison among existing instrumentation systems and the proposed one is made. It shows that the newly-developed system has considerable advantages. Furthermore, the application of this system to the bridge site located in the mountain valley is discussed. Finally, typical samples of measured data from this area are presented. It can be expected that the proposed system has a great application potential in the wind field measurement for remote areas such as the mountainous or island or coastal area, and hazardous structures such as ultra-voltage transmission tower, due to its real-time transmission, low cost and no manual collection of data and convenience.

• Smart Structures and Systems
• /
• v.8 no.1
• /
• pp.119-137
• /
• 2011

A bio-inspired two-mode structural health monitoring (SHM) system based on the Na$\ddot{i}$ve Bayes (NB) classification method is discussed in this paper. To implement the molecular biology based Deoxyribonucleic acid (DNA) array concept in structural health monitoring, which has been demonstrated to be superior in disease detection, two types of array expression data have been proposed for the development of the SHM algorithm. For the micro-vibration mode, a two-tier auto-regression with exogenous (AR-ARX) process is used to extract the expression array from the recorded structural time history while an ARX process is applied for the analysis of the earthquake mode. The health condition of the structure is then determined using the NB classification method. In addition, the union concept in probability is used to improve the accuracy of the system. To verify the performance and reliability of the SHM algorithm, a downscaled eight-storey steel building located at the shaking table of the National Center for Research on Earthquake Engineering (NCREE) was used as the benchmark structure. The structural response from different damage levels and locations was collected and incorporated in the database to aid the structural health monitoring process. Preliminary verification has demonstrated that the structure health condition can be precisely detected by the proposed algorithm. To implement the developed SHM system in a practical application, a SHM prototype consisting of the input sensing module, the transmission module, and the SHM platform was developed. The vibration data were first measured by the deployed sensor, and subsequently the SHM mode corresponding to the desired excitation is chosen automatically to quickly evaluate the health condition of the structure. Test results from the ambient vibration and shaking table test showed that the condition and location of the benchmark structure damage can be successfully detected by the proposed SHM prototype system, and the information is instantaneously transmitted to a remote server to facilitate real-time monitoring. Implementing the bio-inspired two-mode SHM practically has been successfully demonstrated.

• Journal of Broadcast Engineering
• /
• v.14 no.2
• /
• pp.189-196
• /
• 2009

We propose a hybrid broadcast scheduling based on a combination of periodic and on-demand data scheduling methods for mobile data broadcasting in convergence networks from communication and broadcasting. We consider an environment in which the forward channel is for data broadcasting and the reverse channel is for sending data requests via cellular phones, WLAN, WiBro, etc. Collecting statistics of requests from clients, the server partitions the data items into hot-item and cold-item sets. Hot items are sent based on a push-based scheduling. An on-demand scheduling method is applied to cold items. Performance evaluation from simulations shows that our proposed scheduling algorithm yields small response time with high successful response ratio.

• Journal of Advanced Navigation Technology
• /
• v.13 no.4
• /
• pp.509-514
• /
• 2009

In this paper, we designed and analyzed 256GB DRAM-based SSD storage using DDR1 memory and PCI-e interface. SSD is a storage system that uses DRAM or NAND Flash as primary storage media. Since the SSD read and write data directly to memory chips, which results in storage speeds far greater than conventional magnetic storage devices, HDD. Architecture of the proposed SSD system has performance of high speed data processing duo to use multiple RAM disks as primary storage and PCI-e interface bus as communication path of RAM disks. We constructed experimental system with UNIX, Windows/Linux server, SAN Switch, and Ethernet Switch and measured IOPS and bandwidth of proposed SSD using IOmeter. In experimental results, it has been shown that IOPS, 470,000 and bandwidth,800MB/sec of the DDR-1 SSD is better than those of the HDD and Flash-based SSD.

• Journal of Advanced Navigation Technology
• /
• v.13 no.5
• /
• pp.787-792
• /
• 2009

A number of very promising applications such as health monitoring and U-Health of ubiquitous techniques has attracted interest in recent years. Because it can observes the condition of patient from long distance using the equipment which combines with radio communication and medical monitoring system. If it is at emergency situation, it can disposes the condition of the patient. In this paper, we propose the new data format and the transmission communication system of combination medical information with the bluetooth. And we produce the on-board system which transmits the medical information. This system integrated the blood pressure and glucose monitor of personal medical equipment, and the medical information which obtained from on-board system acquires through the gateway with the bluetooth. Medical information is transmitted to the tele-monitor server by the wireline network. We evaluated the proposed system under the laboratory environment and confirmed the excellent performance of transmission of the medical information.

• Journal of KIISE:Information Networking
• /
• v.27 no.2
• /
• pp.149-159
• /
• 2000

In mobile computing environments, invalidation and propagation method based on broadcasting is used to transmit the information for cache maintenance of mobile hosts. Previous researches generally adopted invalidation method that easily adapts to the limited network bandwidth and the frequent disconnection. But the invalidation of frequently accessed data causes the contention on the wireless network with the increasing cache requests. Although the propagation method can reduce the cache requests, the high probability of broken message or loss of message is the main factor that degrades the system performance. To resolve these problems, we propose adaptive cache maintenance scheme that dynamically adjusts the broadcasting ratio of invalidation and propagation, according to the wireless network connection states. The proposed scheme broadcasts the propagation message in stable connection state, so it can reduce the cache requests and server response time. With the decreasing available network bandwidth by the frequent partial disconnection and disconnection, the proposed scheme dynamically increases the broadcasting ratio of the invalidation messages to minimize the broken message or the loss of message probability. Consequently, the proposed scheme resolves the problems which arise in the invalidation or propagation method in mobile computing environments.

• KIISE Transactions on Computing Practices
• /
• v.22 no.6
• /
• pp.296-301
• /
• 2016

Object-based storage is an efficient storage solution that can handle unstructured data and shows better security and scalability than traditional block-based storage. However, in terms of power management, Object-based storage writes multiple copies in storage cluster, hence many servers consume unnecessary power in idle state. In order to resolve this problem, it is necessary to apply power management strategy by adjusting power mode of servers in idle state according to their workloads. In this paper, we proposed a new dynamic power management (DPM) method to transform power mode of storage servers dynamically according to workload information sent from proxy server. The experimental result shows that the proposed power management technic reduces total power consumption by 12% in the OpenStack based Swift object storage.

• Journal of KIISE:Information Networking
• /
• v.35 no.2
• /
• pp.120-129
• /
• 2008

The purpose of sensor network is gathering the information from sensor nodes. If there are selfish node that deliberately avoid packet forwarding to save their own energy, the sensor network has trouble to collect information smoothly. To solve this problem we suggest a mechanism which uses credit payment schema according to the amount of forwarding packets. Sensor nodes use credits to send their own message and they forward packets of other sensor nodes to get credits. To offer authenticity we combined the roles of sink node and server, also we used piggybacking not to send additional report message. The packet trace route is almost fixed because sensor node doesn't have mobility. In this case, it happens that some sensor nodes which don't receive forwarding packets therefore they can't get credit. So, we suggested the way to give more credits to these sensor nodes. Finally, we simulated the suggested mechanism to evaluate performance with ns2(network simulator). As a result, packet transmission rate was kept on a high rate and the number of arrival packets to sink node was increased. Also, we could verify that more sensor nodes live longer due to deceasing the energy consumption of sensor nodes.

• The Journal of the Korea Contents Association
• /
• v.14 no.7
• /
• pp.10-17
• /
• 2014

The focus maintains and manages conference session in the conference service. Load of focus increases by the number of participants and it becomes the major reason that limits the extendability of the large-scale conference service. In this paper, a new distributed focus control method has been proposed to solve this problem. Load of focus has been distributed to several conference nodes to implement large-scale conference service in this architecture. Conference nodes which have focus function subscribe to conference server's conference information database, and focus hae been allocated dynamically to process participants needs according to total numbers of the conference participants. For this purpose a new conference control event package for focus load control has been suggested. Furthermore the exchange procedure of SIP messages between focuses and participants also been suggested. The performance of the proposed system has been evaluated by simulation.