• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.6
• /
• pp.47-56
• /
• 2010

HDD-based RAIDs have been used in high-capacity storage systems for traditional data server. However, their data reliability are relatively low and they consume lots of power since hard disk drive is weak on shock and its power consumption is high due to frequent spindle motor operation. Therefore, this paper presents new SSD based RAID system architecture using various erasure codes. The proposed methode applys Reed-Solomon, EVENODD, and Liberation coding schemes onto file system level and device driver level, respectively. Besides, it uses data allocation method to minimize the side effect of reducing the lifespan of SSD. Detail experimental results show that Liberation code increase wear-leveling rates of SSD based RAID-6 more than other codes. The SSD based RAID system applying erasure codes at the device driver level shows better performance than that at the file system level. I/O performance of RAID-6 system using SSD is 4.5%~8.5% higher than that of using HDD and the power consumption of the RAID system using SSD is 18%~40% less than that of using HDD.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7B
• /
• pp.608-618
• /
• 2006

The increasing popularity of multimedia streaming services introduces new challenges in content distribution. Especially, it is important to provide the QoS guarantees as they are increasingly expected to support the multimedia applications. The service providers can improve the performance of multimedia streaming by caching the initial segment (prefix) of the popular streams at proxies near the requesting clients. The proxy can initiate transmission to the client while requesting the remainder of the stream from the server. In this paper, in order to apply the prefix caching service based on IETF's RTSP environment to the wireless networks, we propose the effective RTSP handling scheme that can adapt to the radio situation in wireless network and reduce the cutting phenomenon. Also, we propose the traffic based caching algorithm (TSLRU) to improve the performance of caching proxy. TSLRU classifies the traffic into three types, and improve the performance of caching proxy by reflecting the several elements such as traffic types, recency, frequency, object size when performing the replacement decision. In simulation, TSLRU and RTSP handling scheme performs better than the existing schemes in terms of byte hit rate, hit rate, startup latency, and throughput.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8B
• /
• pp.716-729
• /
• 2003

As the public Internet and private internet have grown from small networks into large infrastructures, the need to more systematically manage the large number of network components within these networks has grown more important as well. The rapid growth of network size has brought into question the salability of the existing centralized model, such as SNMP(Simple Network Management Protocol) and CMIP(Common Management Information Protocol). Thus, for efficient network management, researches about mobile agent have also been performed recently. This paper presents analytical models of centralized approach based on SNMP protocol, distributed approach based on mobile agent, and mixed mode to make up for shortcomings of SNMP and mobile agent. We compare the performance of these analytical models based on network management response time. Experiment results show that performance of mobile agent and the nixed mode is less sensitive to the delay in WAN network environment. However, SNMP is more efficient for the simple network environment like LAN. We also propose an adaptive network management algorithm in consideration of network t environment. delay, task, and the number of nodes based on the results of analytical models. The results show that the adaptive network management algorithm can reduce the network management response time by 10% compared with either mobile agent or mixed mode network management algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2B
• /
• pp.279-288
• /
• 2004

Rapidly emerging P2P(Peer to Peer) applications generate very bursty traffic, which gives a lot of burden to network, and the amount of such traffic is increasing rapidly. Thus it is becoming more important to understand the characteristics of such traffic and reflect it when we design and analyze the network. To do that we measured the traffic in a campus network and present flow statistics and traffic models of the measured traffic, and compare them with those of the web traffic. The results indicate that P2P traffic is much burstier than web traffic and as a result it negatively affects network performance. We modeled P2P traffic using self-similar traffic model to predict packet delay and loss occurred in network which are very important to evaluate network performance. We also predict queue length distribution and loss probability in SSQ(Single Sewer Queue). To assess accuracy of traffic model, we compare the SSQ statistics of traffic models with that of the traffic trace. The results show that self-similar traffic models we use can predict P2P traffic behavior in network precisely. It is expected that the traffic models we derived can be used when we design network capacity and predict network performance and QoS of the P2P applications.

• The KIPS Transactions:PartC
• /
• v.12C no.6 s.102
• /
• pp.773-780
• /
• 2005

Recently, the telecommunication network is in a transition toward the BcN (Broadband convergence Networks) that integrates the Internet, the telecommunication and the broadcasting. The BcN makes it possible to provide of 4he third-party application by using the Open API The Parlay X API is an example of the Open API and the Parlay X API is grafted in the Web Service and is abstracted from the Parlay API. So, the Parlay X API does not only have advantages of a Web Service, but also disadvantages of the Web Service. The main disadvantage of the Web Service is that it does not support the any QoS mechanism. In this paper, we propose the architecture that solves the reliability among the QoS issues for the Web Service. The proposed mechanism adopts the Asynchronous architecture for the reliable Web Service and improves the performance of the retransmission between the client and the server using the expected response time. We perform the performance evaluation through the simulation in older to compare with the existing mechanism. Consequently, we can confirm that the performance of the proposed mechanism performs better than the existing mechanism.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1588-1596
• /
• 2015

In the Internet of Things (IoT), resource-constrained devices such as sensors are capable of communicating and exchanging data over the Internet. The IETF standard group has specified an application protocol CoAP, which uses UDP as a transport protocol, allows such a lightweight device to transmit data. Also, the IETF recommended the DTLS binding for securing CoAP. However, additional features should be added to the DTLS protocol to resolve several problems such as packet loss, reordering, fragmentation and replay attack. Consequently, performance of DTLS is worse than TLS. It is highly required for lightweight devices powered by small battery to design and implement a security protocol in an energy efficient manner. This paper thus discusses about DTLS performance in the perspective of energy consumption. To analyze the performance, we implemented IEEE 802.15.4 based test network consisting of constrained sensor devices in the Cooja simulator. We measured energy consumptions required for each of DTLS client and server in the test network. This paper compares the energy consumption and amount of transmitted data of each flight of DTLS handshake, and the processing and receiving time. We present the analyzed results with regard to code size, cipher primitive and fragmentation as well.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.2
• /
• pp.146-155
• /
• 2004

Currently most of commercial operating systems contain a high-level audit feature to increase their own security level. Linux does not fall behind the other commercial operating systems in performance and stability, but Linux does not have a good audit feature. Linux is required to support a higher security feature than C2 level of the TCSEC in order to be used as a server operating system, which requires the kernel-level audit feature that provides the system call auditing feature and audit event. In this paper, we present LxBSM, which is a kernel module to provide the kernel-level audit features. The audit record format of LxBSM is compatible with that of Sunshield BSM. The LxBSM is implemented as a loadable kernel module, so it has the enhanced usability. It provides the rich audit records including the user-level audit events such as login/logout. It supports both the pipe and file interface for increasing the connectivity between LxBSM and intrusion detection systems (IDS). The performance of LxBSM is compared and evaluated with that of Linux kernel without the audit features. The response time was increased when the system calls were called to create the audit data, such as fork, execve, open, and close. However any other performance degradation was not observed.

• The KIPS Transactions:PartC
• /
• v.13C no.4 s.107
• /
• pp.501-510
• /
• 2006

Software streaming allows the execution of stream-enabled software on desktop or portable computing devices like PC, PDA, laptop, cellular phone, etc., even while the transmission/streaming from the server may still be in progress. In this paper, we present an efficient streaming system called Software On-Demand(SOD) streaming system to transmit stream-enabled applications in addition to automatic installation of program registry, environment variables, configuration files, and related components. In particular, we design and implement a SOD system in Linux to provide the user with the instant look-and-click software execution environment such that software download and installation are internally proceeded in a completely user-transparent way. Therefore, the SOD system relieves the user from the tricky, failure-prone installation business. In addition, the software developer now obtains a new, powerful means to advertise and propagate their software products since the user can use software packages via user-friendly UI window or web browser by look-and-click interactive operation. In the paper, we also make a couple of SOD streaming experiments using a spectrum of popular softwares. Based on the analysis of the experiment results, we also propose two performance improvement schemes.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.4
• /
• pp.139-148
• /
• 2015

In this paper, the optimum coding method is proposed by using open library in order to improve the performance of a software correlator developed for Korea-Japan Joint VLBI Correlator(KJJVC). The correlation system for VLBI observing system is generally implemented with hardware using ASIC or FPGA because the computational quantity is increased geometrically according to the participated observatory number. However, the software correlation system is recently constructed at a massive server such as a cluster using software according to the development of computing power. Since VLBI correlator implemented with hardware is able to conduct data processing with real-time or quasi real-time compared with mostly observational time, software correlation has to perform optimal data processing in coding work so as to have the same performance as that of the hardware. Therefore, in this paper, the experimental comparison was conducted by open-source based fftw library released in FFT processing stage, which is the most important part of the correlator system for performing optimum coding work in software development phase, such as general method using fftw library or methods using SSE(Streaming SIMD Extensions), shared memory, or OpenMP, and method using merged techniques listed above. Through the experimental results, the proposed optimum coding method for improving the performance of developed software correlator using fftw library, shared memory and OpenMP is effectively confirmed by reducing correlation time compared with conventional method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.415-424
• /
• 2019

In this paper, a minimum rotation radius was designed and fabricated to overcome the threshold so that elderly or disabled people who have difficulty moving can move and transfer safely and conveniently in a narrow room. In the indoor environment, where the sedentary culture develops, this study aimed to provide convenience for passengers with fracture diseases, geriatric diseases, and other knee and waist diseases. First, links, seats, armrests, covers, motors, batteries, chargers, controllers, etc. were attached to the frame so that they could be moved and lifted indoors. The product design and structure were designed considering the user's environment and physical characteristics, and IoT functions were added. A driving experiment was performed to confirm the operating performance of the manufactured indoor moving and lifting wheelchair. The performance tests, such as continuous running time, turning radius, maximum actuator load, maximum lift height, sound pressure level, minimum sensing distance of the driving aid sensor, interworking of server and app programs, device compatibility, and duty cycle error rate, were performed. As a result of the test, the built-in wheelchair could achieve the performance test target of each item and operate successfully.