• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.2
• /
• pp.73-88
• /
• 2000

A series of analysis and experiment on the fishing gear and method of the existing midwater pair trawl net with 12,800mm of maximum mesh size is carried out to determine the most effective shape factor. As the first step of this study, the fishing gear and method for the existing net are analyzed to solve problems, such as being low of the net height by increasing the towing speed, twist of net pendant and twine, suspension of float between knots of mesh. etc. Standing on these results, the existing net are modified by very effective shape based on the theory and technology designing the fishing gear. Also, the model experiment is carried out to determine the most effective shape factor of the modified net in the circulation water channel. The obtained results can be summarized as follows : 1. On the length of net pendants(No.2 and No.3) connected with side line, opening efficiency of net with length 8.0cm of net pendant is the greatest and in the order of 11.5cm, 15.0cm. 2. On the number of the net pendant, opening efficiency of net with 4 lines of net pendant is the greatest and in the order of 3 lines, 2 lines. Center part of side panel is pushed out backward, and the pushed length is increasing by increasing flow speed. 3. On the sinking force, opening efficiency of the net is increasing by increasing sinking force. And opening efficiency shows almost the same when sinking force is greater about 1.5 times than that of the existing net in case of the net with 3 lines of net pendant, and about 1.6 ~ 1.7 times than that of the existing net in case of the net with 2 lines.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.6
• /
• pp.239-249
• /
• 1999

In this study, experimental work has been carried out to investigate the effect of lateral soil movement on passive piles. This paper consists mainly of two parts: the first, performance of a series of laboratory experiments on a single pile and one-row pile groups, and the second, comparison between the measured and the predicted results. In the laboratory experiments, a quadrilateral soil movement profile was imposed on model piles embedded in both sandy soils and weathered soils. The maximum bending moment and pile deflection induced in passive piles were found to be highly dependent on pile stiffness, pile spacing, relative densities and pile head fixity condition. It was shown that the group effect might either increase or decrease the maximum bending moment and pile deflection, depending on the aforementioned influence factors. Based on the results obtained, a spacing-to-diameter ratio of 7.0 seems to be large enough to eliminate the group effect, and a pile in such a case behaves essentially the same as a single pile.

• Journal of Environmental Policy
• /
• v.10 no.4
• /
• pp.3-37
• /
• 2011

This paper investigates the existence of the environmental Kuznets curve (EKC) for carbon dioxide $CO_2$ emissions and its causal relationships with economic growth and openness by using time series data (1971-2006) from China (an emerging market), Korea (a newly industrialized country), and Japan (a developed country). The sample countries span a whole range of development stages from industrialized to newly industrialized and emerging market economies. The environmental consequences according to openness and economic growth do not show uniform results across the countries. Depending on the national characteristics, the estimated EKC show different temporal patterns. China shows an N-shaped curve while Japan has a U-shaped curve. Such dissimilarities are also found in the relationship between $CO_2$ emissions and openness. In the case of Korea, and Japan it represents an inverted U-shaped curve while China shows a U-shaped curve. We also analyze the dynamic relationships between the variables by adopting a vector auto regression or vector error correction model. These models through the impulse response functions allow for analysis of the causal variable's influence on the dynamic response of emission variables, and it adopts a variance decomposition to explain the magnitude of the forecast error variance determined by the shocks to each of the causal variables over time. Results show evidence of large heterogeneity among the countries and variables impacts.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.6
• /
• pp.91-101
• /
• 2019

Tourism or travel business consists of a set of services for people who visit exotic places. Payment is usually marking the end of the series of activities relating to tourism, and it becomes the linkage for the next activity. With the recent advancement of mobile Fintech technologies, we have learned that more convenient and more secure financial transactions are improving the quality of tourism. It should be noted that tourism counts on information technology heavily in terms of mobile Internet and smart devices use, which yields to a wide business opportunities for Fintech startups. However, payment information has not been highlighted for additional marketing promotion activities. The lack of research into information technology-based business models that extend Fintech services related to payment in venture start-up studies hinders the understanding of the possibility of creating new business through the value creation process after payment. This study attempts to investigate this issue based on the theory of smart tourism and service-dominant logic with developing a new information system. More specifically, marketing promotion activities after payment for Chinese tourists visiting Korea are examined. Specifically, WeChat Pay and instant tax refund service were considered while the system was developed by following desing science research methodology. This study is meaningful in that it finds a new possibility of Fintech business model by applying scientific and academic methods, and it reminds the necessity of service automation system centered on instant tax refund.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.277-284
• /
• 2012

In this study, a heat-transfer performance analysis is carried out for a multi-channel volumetric air receiver for a solar power tower. On the basis of a series of reviews regarding the relevant literature, a calculation process is proposed for the prediction of the wall- and air- temperature distributions of a single channel at given geometric and input conditions. Furthermore, a unique mathematical model of the receiver effectiveness is presented through analysis of the temperature profile. The receiver is made of silicon carbide. A total of 225 square straight channels per module are molded to induce the air flow, and each channel has the dimensions of $2mm(W){\times}2mm(H){\times}0.2mm(t){\times}320mm(L)$. The heat-transfer rate, temperature distribution and effectiveness are presented according to the variation of the channel and module number under uniform irradiation and mass flow rate. The available air outlet temperature applied to the solar power tower should be over $700^{\circ}C$. This numerical model was actually used in the design of a 200 kW-level commercial solar air receiver, and the required number of modules satisfying the thermal performance could be obtained for the specified geometric and input conditions.

• Korean Journal of Remote Sensing
• /
• v.33 no.6_3
• /
• pp.1215-1221
• /
• 2017

SeNtinel's Application Platform (SNAP) is an open source software developed by the European Space Agency and consists of several toolboxes that process data from Sentinel satellite series, including SAR (Synthetic Aperture Radar) and optical satellites. Among them, S1TBX (Sentinel-1 ToolBoX)is mainly used to process Sentinel-1A/BSAR images and interferometric techniques. It provides flowchart processing method such as Graph Builder, and has convenient functions including automatic downloading of DEM (Digital Elevation Model) and image mosaicking. Therefore, if computer memory is sufficient, InSAR (Interferometric SAR) and DInSAR (Differential InSAR) perform smoothly and are widely used recently in the world through rapid upgrades. S1TBX also includes existing SAR data processing functions, and since version 5, the processing capability of KOMPSAT-5 has been added. This paper shows an example of processing the interference technique of KOMPSAT-5 SAR image using S1TBX of SNAP. In the open mine of Tavan Tolgoi in Mongolia, the difference between DEM obtained in KOMPSAT-5 in 2015 and SRTM 1sec DEM obtained in 2000 was analyzed. It was found that the maximum depth of 130 meters was excavated and the height of the accumulated ore is over 70 meters during 15 years. Tidal and topographic InSAR signals were observed in the glacier area near Jangbogo Antarctic Research Station, but SNAP was not able to treat it due to orbit error and DEM error. In addition, several DInSAR images were made in the Iraqi desert region, but many lines appearing in systematic errors were found on coherence images. Stacking for StaMPS application was not possible due to orbit error or program bug. It is expected that SNAP can resolve the problem owing to a surge in users and a very fast upgrade of the software.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.4
• /
• pp.335-346
• /
• 2013

AASHTO LRFD and Korean Bridge Design Code (Limit State Design) specify to consider Truck and Lane load simultaneously determined from reliability-based live load model, and impact shall be applied to the truck load while it shall not be applied to the lane load. In this paper, vehicle-bridge interaction analysis under moving truck and lane loads were performed to estimate impact factor of the cables and girders for the selected multi-cable-stayed composite bridges with 230m, 400m and 540m main span. A 6-d.o.f. vehicle was used for truck load and a series of single-axle vehicles was applied to simulate equivalent lane load. The effect of damping ratio on the impact factor was estimated and then the essential parameters to impact factor, i.e., road surface roughness and vehicle speed were considered. The road surface roughness was randomly generated based on ISO 8608 and it was applied to the truck load only in the vehicle-bridge interaction analysis. The impact factors evaluated from dynamic interaction analysis were also compared with those by the influence line method that is currently used in design practice to estimate impact factor in cable-stayed bridge.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.376-381
• /
• 2018

The purpose of this study is to investigate price transmissions between wholesale and retail markets regarding Jeju tangerines by employing co-integration analysis and vector error correction model. The results of this study are summarized as follows: First, the long-run equilibrium relationship was found among wholesale and retail markets in time series for level by distribution channel. Second, a short-run causality relationship was observed between wholesale and retail markets. Third, the long-run causality relationship between wholesale market and retail markets was found bidirectional and feedback effect. These results imply that the wholesale price performs a central role in establishing price in the tangerine market, and the wholesale market influences tangerine price. In conclusion, for the development of a competitive tangerine industry, it is necessary to aggressively promote the policy of supply and demand control of tangerine production through organizing producers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.518-527
• /
• 2016

The housing market is changing continuously according to the place and time and these changes have a ripple effect across various fields. On the other hand, the amount of housing that is consumed in the region also acts as a central cause of price movement. Moreover, the cause of variations in the housing market can be separated according to the characteristics of the housing consumer. In addition, the individual characteristics of the consumer varies according to the region. As a result, a study on the regional causal relationship of the housing market is underway. Although significant research has been done on the domestic home sales market, there has been limited research on the housing charter market. Therefore, in this paper, regional causal relationship of the housing market in the Gangnam and Gangbuk area in Seoul and Gyeonggi Province was analyzed using the vector error correction model, and is segmented by housing sale market and housing jeonse market. In addition, housing sale and housing jeonse of Gangam, Ganbuk and Gyeonggi province are defined as analysis variables, and time series data is the monthly material of June 2003 to November 2015. The results of the analysis, in the case of the housing sale market, showed that fluctuations in house prices in Gangnam area have a major influence on the fluctuations in house prices in the surrounding region. Similarly, in the case of the housing jeonse market, it was found that the jeonse price of Gangnam area has a significant impact on the jeonse price of housing in the surrounding area.

• The Korean Journal of Applied Statistics
• /
• v.28 no.6
• /
• pp.1275-1288
• /
• 2015

A microscale weather analysis module (about 1km or less) is a microscale numerical weather prediction model designed for operational forecasting and atmospheric research needs such as radiant energy, thermal energy, and humidity. The accuracy of the module is directly related to the usefulness and quality of real-time microscale weather information service in the metropolitan area. This paper suggests an object based verification method useful for spatio-temporal evaluation of the accuracy of the microscale weather analysis module. The method is a graphical method comprised of three steps that constructs a lattice field of evaluation statistics, merges and identifies objects, and evaluates the accuracy of the module. We develop lattice fields using various evaluation spatio-temporal statistics as well as an efficient object identification algorithm that conducts convolution, masking, and merging operations to the lattice fields. A real data application demonstrates the utility of the verification method.