• Journal of Educational Research in Mathematics
• /
• v.14 no.4
• /
• pp.347-366
• /
• 2004

Recently, there have been many assessment researches in Korea. The aim of this study is to reflect on framework for mathematics assessment in RME which is based on Jan de Lange's assessment theory and to induce desirable directions for our mathematics assessment in nation-level and class-level. In order to attain these purposes, the present paper reflects the philosophy of RME, Jan de Lange's framework for mathematics assessment, assessment framework of the unit 'Side Seeing', one of Mathematics in Context textbook series, as an exemplar to which Jan de Lange's framework is applied. Based on these reflections, it is discussed that it needs to specify achievement standards presented in mathematics curriculum more particularly in order to have framework including mathematical abilities of level 2 and level 3 in Jan de Lange's framework appropriate to our situations, to apply the framework to nation-level and class-level consistently, and to enhance abilities of teachers and student teachers for mathematics assessment.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1055-1061
• /
• 2000

The kinetics of tar formation has been studied experimentally and modeled mathematically for waste lubricating oil after pyrolyzed at batch reactor. And stabilization of pyrolyzed oil has been studied. A combination of series and parallel reaction was assumed for the mechanism of tar formation. From the proposed kinetic model, pyrolyzed oil to tar was found to be rate limiting step for tar formation. It was found that the fly ash and coke had the ability to remove materials of tar formation and to protect oxidation of pyrolyzed oil.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.2
• /
• pp.63-71
• /
• 2003

The main functions of containment boom for marine floating debris are to prevent spreading of the marine floating debris and to effectively collect the trash skimmer. The design characteristics of containment boom for marine floating debris in wave, current and wind are investigated. The response of a containment boom on the current is a function of a number of parameters, such as geometric characteristics, buoyance/weight ratio and towing velocity. To understand the relationship between these design parameters more clearly, a series of tests with three models with the variation of current speed and gap ratio was conducted. The model tests results are developed to new numerical equation that is tension prediction method of containment boom for marine floating debris. Also its is compared with open sea experimental results.

• Journal of Korea Foundry Society
• /
• v.17 no.5
• /
• pp.465-471
• /
• 1997

An integrated computer program consisting of a pre-processor, main solver, and post-processor was developed for the design of large steel castings. The pre-processor, based on the AutoCAD, enables the user to produce approval drawings, casting design drawings and mesh diagrams in sequence using a personal computer. In the main solver, two numerical models were employed; one models the fluid flow during mold filling, and the other models the heat transfer and solidification. The post-processor can be used to present simulation results such as flow pattern, mold filling sequences, solidification times, temperature gradients and location of shrinkage defects by color graphics. In order to validate the applicability of the present integrated program, a series of experiments on simple-shaped steel castings were carried out. After the validation of the present model, it was applied to the casting design of the large steel anchor of an SC42 alloy. Various solidification parameters such as a temperature distribution and a solidification time in the casting and the mold were compared with those obtained experimentally. Simulated results predicting shrinkage defects were in good agreement with those obtained experimentally. It was found that the present method can be successfully applied to the quantitative casting design for complex-shaped large steel castings.

• Smart Media Journal
• /
• v.8 no.4
• /
• pp.33-37
• /
• 2019

Because the ECG signals are time-series data acquired as time elapses, it is important to obtain comparative data the same in size as the enrolled data every time. This paper suggests a network model of GAN (Generative Adversarial Networks) based on an auxiliary classifier to generate synthetic ECG signals which may address the different data size issues. The Cosine similarity and Cross-correlation are used to examine the similarity of synthetic ECG signals. The analysis shows that the Average Cosine similarity was 0.991 and the Average Euclidean distance similarity based on cross-correlation was 0.25: such results indicate that data size difference issue can be resolved while the generated synthetic ECG signals, similar to real ECG signals, can create synthetic data even when the registered data are not the same as the comparative data in size.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.3
• /
• pp.1251-1264
• /
• 2018

The systematic and effective design method of a Class-D current-source resonant inverter for use in an induction cooker with zero-ripple line current is presented. The design procedure is based on the principle of the Class-D current-source resonant inverter with a simplified load network model that is a parallel equivalent circuit. An induction load characterization is obtained from a large-signal excitation test-bench based on parallel load network, which is the key to an accurate design for the induction cooker system. Accordingly, the proposed scheme provides a systematic, precise, and feasible solution than the existing design method based on series-parallel load network under low-signal excitation. Moreover, a zero-ripple condition of utility-line input current is naturally preserved without any extra circuit or control. Meanwhile, a differential-mode input electromagnetic interference (EMI) filter can be eliminated, high power quality in utility-line can be obtained, and a standard-recovery diode of bridge-rectifier can be employed. The step-by-step design procedure explained with design example. The devices stress and power loss analysis of induction cooker with a parallel load network under large-signal excitation are described. A 2,500-W laboratory prototype was developed for $220-V_{rms}/50-Hz$ utility-line to verify the theoretical analysis. An efficiency of the prototype is 96% at full load.

• 대한공업교육학회지
• /
• v.31 no.2
• /
• pp.364-380
• /
• 2006

This paper presents a procedure for designing command to maneuver flexible structure with very little residual vibration, even in the presence of modeling errors. For the open loop maneuver, the various shaped profiles using multiple step inputs delayed in time are considered for robustness and compared with the responses of rigid body and flexible body in virtue of simulations and experiments. Input shaping generates vibration-reducing shaped commands through convolution of an impulse sequence with the desired command. A flexible model with a cylindrical hub and four symmetric appendages is considered to examine the responses to real plant, and to illustrate the effectiveness of the proposed shapers. The appendages are long and flexible, leading to low frequency vibration under any control action. It is shown by a series of simulation that a properly designed feedback controller with input shaper performs well, as compared with open loop controller with input shaper. The control objective is to achieve a fast settling time of residual vibration to flexible structure and robustness (insensitivity)to plant uncertainty, to eliminate residual vibration.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.349-354
• /
• 2006

This study analyzed the fluid state around a container crone according to a wind direction when a wind load was applied to a container crone. The container crane for this research is a model of a 50-ton class used broadly in the current ports. The dimension of an external fluid field set up diameter, 300m, height, 200m. This study considered the change of a wind velocity according to an altitude in a criterion of a wind velocity, 50m/s, applying a power series law. An incident angle applied to an interval of 30 degrees in $0^{\circ}{\sim}180^{\circ}$ and this study carried out a computation fluid dynamics using a CFX-10. In this study, we indicate the wind pressure according to the height and section figure of each member. In addition, we suggest the wind pressure accordint to a wind direction. And we will analyze the structure stability of a container crone from the fluid-ductile analysis in the next study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6315-6324
• /
• 2015

This study analyses the effects of household finances on rental price of apartment in Seoul which play a major role in real estate policy. We estimate VAR models using time series data. Economy variables such as sales price of apartment in Seoul, consumer price index, hiring rate, real GNI and loan amount of housing mortgage, which relate to household finances and influence the rental price of apartment, are used for estimation. The main findings are as follows. In the short term, the rental price of apartment is impacted by economy variables. Specifically, Relative contributions of variation in rental price of apartment through structural shock of economy variables are most influenced by their own. However, in the long term, household variables are more influential to the rental price of apartment. These results are expected to contribute to establish housing price stabilization policies through understanding the relationship between economy variables and rental price of apartment.

• Tunnel and Underground Space
• /
• v.17 no.2 s.67
• /
• pp.90-101
• /
• 2007

With increasing development of underground space, underground pumped storage power plants, which generate power by felling water in upper reservoir to lower reservoir, have been continuously constructed. For efficient and safe design, construction and maintenance or such power plants, it is very important to understand in-situ stress and the mechanical properties of the surrounding rock mass at the design stage. The power plant presented in this paper is under construction at a depth of $320{\sim}375m$. For stability evaluation of the structure, in-situ stress was measured by over-coring method. Also pressurementer test and a series or laboratory tests were performed to obtain the mechanical properties. Numerical analyses were conducted to check the efficiency of designed support patterns. The results showed that unstable areas occurred partly in the numerical model, and therefore supports were additionally applied. Finally complete stability was obtained and the following excavation has been operated successfully until now.