• Journal of the Korean Society for Marine Environment & Energy
• /
• v.1 no.2
• /
• pp.27-39
• /
• 1998

The interaction of monochromatic incident waves with a horizontal flexible membrane is investigated in the context of two-dimensional linear hydro-elastic theory. First, analytic diffraction and radiation solutions for a submerged impermeable horizontal membrane are obtained. Second, the theoretical prediction was compared with a series of experiments conducted in a two-dimensional wave tank at Texas A&M University. The measured reflection and transmission coefficients reasonably follow the trend of predicted values. Using the developed computer program, the performance of surface-mounted or submerged horizontal membrane wave barriers is tested with various system parameters and wave characteristics. It is found that the properly designed horizontal flexible membrane can be an effective wave barrier.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.469-474
• /
• 2019

One of the world's major resources is crude oil, the most fundamental part of the industry. There is no place that does not use crude oil. Petroleum refining products and chemical production industrial products are produced through nearby petrochemical complexes and ports after importing crude oil. There would be a possible relationship among the petrochemical complexes and nearby regional ports working with liquid cargoes. To confirm these relations, Ulsan Port, Daesan Port, and Yeosu Gwangyang Port were selected for this study. A Vector Auto Regressive model using time series data was applied. A Unit Root Test was performed. The relationship was confirmed through the Granger and Toda Yamamoto Causality Test.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.7
• /
• pp.799-808
• /
• 2016

The IEEE 802.15.7r1 Task Group (TG7r1), known as the revision of the IEEE 802.15.7 Visible Light Communication standard targeting the commercial usage of visible light communication systems which mainly use either image sensors or cameras, is of interest in this paper. The vast challenge in Image Sensor Communications (ISC), as it has been addressed in the Technical Consideration Document (TCD) of the TG7r1, is the Image Sensor Compatibility to support the variety of different commercial cameras available on the market. The on-going ISC standard must adhere to compatible image sensors regulations. This paper brings an inside review of the TG7r1 and an inside look of related works on Image Sensor Communications. The paper analyzes the compatibility features by introducing a revised model of receiver to explain how those features are necessary. One of the most challenging but interesting features is the capability in being compatible to camera frame rates. The variation of camera frame rate is modeled from verified experimental results. Noticeably, three singular approaches to support frame rates compatibility, including temporal approach, spatial approach, and frequency-domain approach, are proposed on the paper along with concise definitions. Those schemes have been presented as valuable proposals on the call-for-proposal meeting series of the TG7r1 recently.

• Journal of Integrative Natural Science
• /
• v.8 no.4
• /
• pp.285-292
• /
• 2015

LIM kinases belong to the serine/Threonine kinase family. The members of the LIM kinase (LIMK) family include LIMK 1 and 2 which are involved in the regulation of actin polymerisation and microtubule disassembly. LIMK1 was shown to be involved in cancer metastasis, while LIMK2 activation promotes cells cycle progression. Since LIMK2 plays a vital role in many disease conditions such as pulmonary hypertension, cancer and viral diseases, and till date there are not much selective inhibitors been reported, LIMK2 becomes an interesting therapeutic target among the kinases. 3D QSAR study was carried out on a series of pyrrolopyrimidines based derivatives as LIMK2 inhibitors. A reasonable CoMFA ($q^2$=0.888; ONC=3; $r^2$=0.974) with good statistical values was developed. The developed model was validated using 1000 runs of boostrapping and was found to be predictable. The results of CoMFA contour map analysis suggested that the bulky substitution at $R_4$ and $R_5$ position are highly desirable to increase the activity. Similarly, positive substitution at $R_3$ position is also required to increase the activity. It is also noted that bulky substitution at $R_1$ position must be avoided. Our results could provide valuable information to enhance the activity of the LIMK2 inhibitors and to design potent pyrrolopyrimidines derivatives.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.9
• /
• pp.401-408
• /
• 2014

This paper proposes an optimum operation method for open type ground heat exchangers. A series of TRTs and artificial heating/cooling operations were carried out while monitoring temperature in the hole of SCW. The ground temperature naturally increases with depth, but a switch between the cooling/heating mode results in a change in the distribution of ground temperature. The effect of the mode change was evaluated by performing LMTD and COMSOL multiphysics analysis for a reduced model with the depth of 150 m. As a result, in the cooling mode, the upstream operation is more efficient than the downstream operation and reduces EWT by $2.26^{\circ}C$. On the other hand, in the heating mode, the downstream operation is advantageous over the upstream operation and increases EWT by $3.19^{\circ}C$. The merit of the optimum operation will be enhanced for the typical dimension of SCW with a depth of 400~500 m. In the future, an open type ground heat exchanger system adopting the optimum operation with variation in the ground temperature will be used in practice.

• Journal of the Korean Solar Energy Society
• /
• v.36 no.2
• /
• pp.41-51
• /
• 2016

A solar air heater was designed for supplementary domestic heating. The absorber plate had a series of protruding notches which had triangular openings on the front surface of the absorber plate to direct partial air flow to the rear surface and to enhance the convective heat transfer to the flowing air. The height of the opening as well as the opening configuration was determined by preceding numerical simulations. The experimental model had an absorber plate of 0.78-m width and 1.0-m length which was coated with black paint. The air temperature increased as much as $18^{\circ}C$ for $90-m^3/h$ flow rate when the absorber plate was inclined by $45^{\circ}$ for a clear-day solar irradiation of about $906W/m^2$. The collector efficiency ranged from 69 to 74%. Considering the simplicity of the structure and low manufacturing cost, the solar air heater might have competence as an auxiliary heating device for domestic use. On-site experimental results are presented with discussion for various solar irradiations and air flow conditions.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.6
• /
• pp.453-460
• /
• 2017

In order to investigate propulsion efficiency and cavitation characteristics for expanded area ratio variation of the 8800TEU class container propeller, a series of performance tests were conducted at Large Cavitation Tunnel (LCT) and Towing Tank (TT) in KRISO. The cavitation test of the existing propellers (KP1029 & KP1030) was conducted using FRP model ship in LCT. On the basis of LCT test results, it was required to design propeller with better propulsion efficiency and cavitation performance. Two propellers (KP1171 & KP1172) with decreased expanded area ratio were designed on the basis of KP1029 propeller. The new design propellers showed higher efficiency than KP1029 and reasonable cavitation performance. In the future, they will be applied as the standard propeller for the propeller design of the large container ship. Through the performance test and prediction results for the new design propellers, it is thought that high-load propeller with better propulsion efficiency and cavitation performance will be developed constantly.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.7
• /
• pp.2637-2643
• /
• 2015

Background: It has been proven that an individuals health behavior is determined through a series of processes. This study aimed to assess the stages of adoption of breast cancer screening, and to identify the factors relating to progress through these stages. Materials and Methods: There were 202 female participants aged 20-59 years who were living in Chungbuk, South Korea. They were informed of the study purpose and agreed to participate. Data were collected from October 2010 to January 2011 by assessing the breast cancer screening stage, health beliefs, socio-demographic factors, and other facilitating factors. The participant current stage of adoption of breast cancer screening was classified using the Precaution Adoption Process Model (PAPM), and the various PAPM stages were compared with each other to identify factors likely to determine progress between stages. The data were analyzed using the ${\chi}^2$-test, ANOVA, Duncan test, and multiple logistic regression. Results: Approximately half of all participants were not on-schedule for breast self-examination and mammography (unaware, 9.4% and 11.4%, unengaged, 8.4% and 5.0%, undecided, 20.3% and 17.8%, decided not to act, 1.5% and 1.0%, decided to act, 13.4% and 15.3%, respectively). The factors likely to determine the progress from one stage to another were age, marital status, exposure to media information about breast cancer, self-efficacy, and perceived severity. Conclusions: These results suggest that it is necessary to develop a tailored message for breast cancer screening behavior.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.6
• /
• pp.44-51
• /
• 1999

The HMM-Net is a neural network architecture that implements the computation of output probabilities of a hidden Markov model (HMM). The architecture is developed for the purpose of combining the discriminant power of neural networks with the time-domain modeling capability of HMMs. Criteria of maximum likehood(ML) and minimization of mean squared error(MMSE) are used for learning HMM-Net classifiers. The criterion MMSE is better than ML when initial learning condition is well established. However Ml is more useful one when the condition is incomplete[3]. Therefore we propose an efficient learning method of HMM-Net classifiers using a hybrid criterion(ML/MMSE). In the method, we begin a learning with ML in order to get a stable start-point. After then, we continue the learning with MMSE to search an optimal or near-optimal solution. Experimental results for the isolated numeric digits from /0/ to /9/, a training and testing time-series pattern set, show that the performance of the proposed method is better than the others in the respects of learning and recognition rates.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.3
• /
• pp.243-250
• /
• 2009

In order to reduce the time needed for design, enterprises recently need the customizing technology that can modify the functions of existing CAD systems according to the their purposes. So most of the companies developing commercial CAD system are providing API to make possible the preparation of macro or external programs, which allow automatic performance of a series of repeated tasks. The objective of the present paper is to achieve more convenient carrying out of a particular modeling, by developing 3D CAD template of the standardized engineering rule of the particular model in order to establish a knowledge-based product development system. The formula, data and design knowledge which are required for the designing of the components of refrigerator were made into a program by means of Unigraphics' UG/Open API. And examples of such a development were presented. By using them in connection with commercial CAD system, design verification and modification were efficiently applied to the product design business.