• Journal of Nutrition and Health
• /
• 제29권1호
• /
• pp.9-21
• /
• 1996

This study was carried out to evaluate the fatty acid intakes of employees in employee feeding operations in Seoul and to provide prudent dietary guidelines with special concern on dietary fat. Four establishments were selected in large scale group and other four were selected as small scale group according to feeding numbers and food cost. Food intake was measured by substracting the leftover from the averaged portion amount. The leftover was measured by the modified aggregate selection plate waste measurement technique. The results were as follows : Employees from the large scale institution consumed more energy, protein, carbohydrate and niacin compared to those from the small scale institution(p<0.05). The mean calorie compositions of carbohydrate, protein and fat of all subjects were 66.7, 16.4 and 16.9%. The mean fat intake was 12.1g/lunch. Linoleic acid(C18:2 $\omega$6, 3.67g) was the most abundant fatty acid contained in the diet, followed by oleic acid (C18:1 $\omega$9, 3.53g) and palmitic acid(C16:0, 1.83g). The subjects consumed 5.2g polyunsaturated fatty acids(PUFA), 4.6g monounsaturated fatty acid(MUFA), 3.2g saturated fatty acid(SFA) per lunch per person. The average ratios of P/M/S and $\omega$6/$\omega$3 fatty acids were 1.6/1.5/1.0 and 8.5/1/0., respectively. the dietary $\omega$3 fatty acid status can be improved, even though the ratios found belong to the desirable range, by including $\omega$3 fatty acid rich-foods such as bean products and seafoods more frequently in the diet. Caution is needed for higher unsaturated nature of $\omega$3 series fatty acids to be prevented from peroxidation.

• Ocean Science Journal
• /
• 제40권3호
• /
• pp.127-143
• /
• 2005

The taxonomic sufficiency approach has been proposed as a surrogate for the typical analysis of species-abundance data, especially in conditions involving prominent pollution gradients. Here, we evaluate the use of taxonomic sufficiency with infralittoral macrobenthic data derived from samples taken in a moderate polluted subtropical environment in southeastern Brazil, analysing five taxonomic levels and including two functional levels throughout polychaete feeding guilds and trophic groups. The data were collected seasonally at nine stations and studied for two abundance data series (0.5 and 1.0 mm sieve mesh-size). The results showed a similar ordination pattern between the two sieve mesh-size, but with the 0.5 mm sieve data a different pattern was observed during austral summer. A slight loss of information was detected using genus, family, polychaete species and their feeding guilds as taxonomic/functional units. These results together with those of the cost! benefit ratio, suggested that the family level seemed to be sufficient to detect the impact caused by moderate pollution in this shallow-water, subtropical environment. In additional, through the use of feeding guilds, similar patterns are obtained. Correlation analysis showed that chlorophyll a, total organic matter, zinc, and chromium sediment content were the variables that best explained the biological pattern observed and not always the best correlation coefficient occurring at the species level. The feeding guild approach seems to be useful and generates interpretable results similar to those obtained with the species level of the whole macroinfauna. The results showed an important cost reduction in the sample processing, suggesting that it is possible to adopt a coarser taxonomic level monitoring program even in species-rich communities.

• 한국전자파학회논문지
• /
• 제15권2호
• /
• pp.188-193
• /
• 2004

본 논문에서는 도파관의 슬롯 급전과 서브어레이를 이용한 마이크로스트립 배열 안테나를 나타내었다. 서브어레이는 마이크로스트립만을 이용한 급전에 비해 급전 손실을 줄일 수 있으며 40.5 GHz에서 43.5 GHz까지 넓은 주파수 범위와 평탄한 이득을 얻을 수 있도록 설계되었다. 24${\times}$24 직렬 급전 배열 안테나는 최대 32.4dBi의 이득을 얻었다.

• Journal of Biosystems Engineering
• /
• 제32권5호
• /
• pp.292-300
• /
• 2007

Not many types of roughage cutters have been introduced in Korea so far. However, those machines could not satisfy farmers to cut rice straw or barley wrap-silage properly. Stiffness and firmness of roughage bale were two obstructing factors. In order to solve this problem, a tractor attached cut-feeding machinery for the round baled roughage was developed for dairy and beef cattle farm in Korea. A series of tests were performed and acquired data were analyzed by using the several imported roughage cutters, which have been already introduced in dairy farm in Korea. And, a prototype of forage cutter was selected, analyzed, designed and manufactured to develop a tractor attached roughage cut-feeder for round bale. Also, the prototype machine was tested, modified and improved through revising model. As a result, a tractor attached roughage cut-feeder for round bale was manufactured. In order to evaluate the performance of the model machinery. a series of test were performed by the prototype machinery both at the plant and field. The model machinery developed satisfied in both power requirement and cutting capacity. As a conclusion, one of the obstacles against feeding the round baled roughage in the korea cattle farm can be eliminated by developing the tractor attached round baled roughage cut-feeder.

• 한국정보통신학회논문지
• /
• 제23권10호
• /
• pp.1269-1274
• /
• 2019

본 논문에서는 5G 어플리케이션을 위한 네 개의 마이크로스트립 패치 배열 안테나를 설계 및 분석하였다. 제안한 배열 안테나는 네 개의 사각형 마이크로스트립 패치 안테나로 구성되며, 배열 안테나의 양쪽 측면에 반원형 에칭구조가 포함된다. 안테나는 시리즈 및 동일 급전 네트워크를 사용하여 공급되며, 하단의 접지면은 안테나의 주파수 특성을 개선하기 위해 변경된다. 마지막으로 안테나의 지향성 특성을 향상시키기 위해 야기-형 구조가 추가된다. 제안한 마이크로스트립 패치 배열 안테나는 21.95 ~ 31.86 GHz의 넓은 주파수 대역폭을 확보하였다. 안테나의 이득은 28 GHz대역에서 9.7 dBi의 이득을 보였으며, 제안한 주파수 대역 전반에 걸쳐 높은 이득과 높은 지향성을 유지하였다. 제안한 안테나는 낮은 프로파일과 간단한 구조로 인해 5G 어플리케이션을 위한 좋은 대안될 수 있을 것이다.

• 한국응용곤충학회지
• /
• 제47권4호
• /
• pp.369-378
• /
• 2008

Imidacloprid를 처리한 후에 복숭아혹진딧물의 처음 반응은 처리농도에 따라 차이를 나타내고 있다. 복숭아혹진딧물의 구침이 식물체에 머무는 시간은 imidacloprid의 농도가 증가함에 따라서 증가하는 경향을 보였다. 잎에 침투한 imidacloprid의 농도는 HPLC를 이용하여 측정하였으며, imidacloprid가 잎에 잔류하고 있는 잔류량은 처리농도를 달리함에 따라서 약간의 차이를 나타내고 있다. 그렇지만, imidacloprid의 침투이행 비율은 침지시간이 길어질수록 높았으나, imidacloprid의 농도와 침지 시간사이의 잔류량은 상관관계가 없었다. 복숭아혹진딧물이 imidacloprid에 대하여 처음 반응하는 잔류량은 0.32-0.35mg/L에서 볼 수 있었다. 따라서 아마도 복숭아혹진딧물은 imidacloprid의 추천 농도보다 매우 적은량을 처리하더라도 인식할 것으로 생각된다. 복숭아혹진딧물은 EPG 기록을 시작하고 처음 3시간 동안 활발한 기주탐색행동을 한 후에 물관부와 체관부에서 흡즙행동을 보이고 있다. Imidacloprid를 처리한 후 90분 후부터 30분간 진딧물이 구침을 식물체로부터 빼는 행동이 늘어나게 되며, 물관부 혹은 체관부에서의 흡즙행동은 현저히 감소하게 된다. 특히 물관부에서의 흡즙하는 행동의 비율은 imidacloprid의 처리농도에 따라서 매우 달라지게 된다.

• Nutritional Sciences
• /
• 제2권2호
• /
• pp.65-70
• /
• 1999

Feeding rats a diet containing bean-hull causes hypertropy in their parotid glands due to the high tannin content. The amount of feedintake of rats led bean-hull was higher than that of rats fed a standard diet. However, the increase in body weight of rats fed bean-hull was lower than that of rats fed a standard diet, which resulted in significantly low feed efficiency of the bean-hull containing diet. Within one week, parotid glands significantly enlarged and a series of proline-rich proteins (PRPs) were produced, which were similar to those induced by feeding high-tannin sorghum with flight differences in molecular weights. Even though the direct comparison between PRPs produced by the bean-hull containing diet and those induced by the high sorghum diet is not appropriate due to laboratory inconsistences, several new PRPs were produced by high tannin diets in both experiments. Differences in molecular weights of PRPs induced in two different tannin sources must be funker investigated to be fully characterized. These morphological and biochemical changes have now been demonstrated to occur in response to the ingestion of tannins, presumably to diminish the anti-nutritional effects of tannins.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제16권1호
• /
• pp.49-52
• /
• 2013

Antral web is a rare cause of gastric outlet obstruction in neonate. It is a 2-4 mm thin mucous membrane that can be found anywhere from 1 to 7 cm proximal to the pylorus. The baby was born at gestational age of $32^{+1}$ weeks with 1,880 g as 2nd baby of dizygotic twin. After birth, the baby had constant non-bilious vomiting without feeding while he didn't show abdominal distension or discoloration. The infantogram showed distended stomach with distal small bowel gas. Upper gastrointestinal series revealed that the antrum was abruptly narrowed at 1 cm proximal to pylorus. We performed laparotomy at the 10th day after birth and excised the 2 mm-thick web circumferentially. He began milk feeding after 6 days and discharged uneventfully at postoperative 35 days with corrected age of $38^{+4}$ weeks with body weight 2,420 g. The antral web should be considered in the case of non-bilious vomiting in neonate.

• 한국응용곤충학회지
• /
• 제33권1호
• /
• pp.33-38
• /
• 1994

점박이응애 알에 대한 긴털이리응애의 전반적 채식행동을 연구하였다. 먹이가 충분히 존재할 때, 긴털이리응애는 섭식-섭식후이도.휴식-탐색 등 일련의 과정을 반복햇을며, 각각의 시간 소비(평균$\pm$표준편차)는 6.83$\pm$1.73, 3.00$\pm$1.33, 93.57$\pm$30.19 분이었고 탐색시간은 9분에 가가웠다. 섭식후이동은 이동 속도가 느리고 (초속0.09mm)한쪽 방향으로연속하여 회전하는 범위제한적 탐색행동을 보였으며 이탕행동은 속도가 빠르고(초속 0.31mm) 반응면적의 가장자리를 따라 이동하는 특징을 보였고, 탐색행동은 중간의 특징을 보였다. 또한 긴털이리응애의 섭식위치는 집중분포를 따랐다.

• 소성∙가공
• /
• 제25권2호
• /
• pp.116-123
• /
• 2016

Press-brake bending is used to shape flat and thick plates into a targeted circular configuration without excessive localized thinning or thickening. A brake bending press called 'a knife press bending apparatus' has been widely adopted to manufacture thick, large and long pipe from initially thick plate. Submerged Arc Welded (SAW) pipes are also produced by employing press-brake bending. These pipes are mainly used for oil, natural gas and water pipelines. The principal process variables for press-brake bending can be summarized as stroke of the press-brake knife, the distance between both roll in the lower die, and the feeding length of the plate. Many combinations of these process variables are available, thus various pipe diameters can be realized. In the current study, a series of repetitive numerical simulations by feeding a thick plate with initial thickness of 25.4mm were conducted with the consideration of elastic recovery. Furthermore, an index for SAW pipe production is proposed which can be widely used in industry.