• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.4
• /
• pp.558-564
• /
• 1999

A series of experiments were conducted to determine the effects of standard (ST), long-term (LT), and expander (EX) conditioners on nutritional value of phase-three nursery and finishing swine diets. In Exp. 1, 180 pigs (average initial BW of 11.7 kg) were fed com-soybean meal based diets (1.3% lysine) during a 28 d growth assay. Gain/feed was improved (p<0.004) with pelleting and pellet durability index (PDI) increased with degree of conditioning (LT>ST). However, there was no advantage for LT vs ST conditioning in rate or efficiency of gain (p>0.5). In Exp. 2, 180 pigs (average initial BW of 10.4 kg) were fed con-soybean meal based diets (0.9% lysine) during a 28 d growth assay, Pelleted diets tended to support greater ADG (p<0.08) and gain/feed (p<0.002) with no marked advantage from EX vs ST conditioning. In Exp 3, a total of 70 barrows (average initial BW of 54 kg) was used in a growth assay to determine the effects of feeding a com-soybean meal based diet processed with a standard (ST) steam conditioner, a long-term (LT) steam conditioner, and an expander (EX) conditioner. The conditioned diets were fed as mash (M) or pellets (P) to give a $2{\times}3$ factorial plus a meal control. PDI increased with degree of conditioning (EX>LT>ST). There was a trend (p<0.07) for greater ADG in pigs fed diets that had been thermally conditioned. Also, there was a general advantage in gain/feed with pelleting (p<0.04), but this advantage was pronounced only with standard conditioning. Indeed, the greatest gain/feed was observed for pigs fed the expander treatments (p<0.03) and the expander mash was used as efficiently as the expander pellets. There was no difference in backfat thickness among pigs fed the treatments (p>0.3). but the more extreme the processing technique. the greater the incidence and severity of stomach lesions (p<0.04). These results suggest maximum rate and efficiency of growth with pelleting after standard steam conditioning or simply feeding an expanded mash.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.1
• /
• pp.220-234
• /
• 1997

The purpose of this study was to investigate the knowledge and attitude of a group of mothers who had infants about baby bottle tooth decay(BBTD) and dental caries prevention. The sample consisted of 261 mothers who had infants from 6 to 36 months from certain areas of Dae-jeon city. The mothers were asked to answer a questionnaire which included a series of questions regarding general information cencerning the infant and his mother, knowledge about BBTD and methods of prevention using fluoride, knowledge about behavioral risk factors contributing to caries of the infant, attitude toward oral health care of the infant, opinions regarding the effectiveness of methods to prevent dental caries and sources of oral health information. he results of this study were as follow. 1. 85.4% of the respondents thought that prolonged bottle feeding would harm the teeth of the infant, but 77% of the respondents had never heard of baby bottle tooth decay. 2. Levels of knowledge about methods of prevention using fluoride were relatively low and there were significant relationships between the levels of this knowledge and the educational level of the respondents(P<0.05). 3. Only 7.3% of the respondents thought that prolonged breast feeding would harm the teeth of the infant. 4. Overall oral health care of the infants was relatively insufficient. 5. Only 28.7% of the respondents selected either when the first tooth erupt or deciduous dentition complete as the time a infant should first be seen by a dentist. 6. 64.6% of the respondents thought that toothbrushing should be instituted once the first tooth appears. 7. Among the six methods of preventing caries in infants, respondents ranked the effective of fluoride lower than making regular dental visits and reducing intake of sugared foods. 8. Most frequently cited sources of information about dental health were newspapers, magazines and books(65%), followed by friends, neighborhoods and families (55%).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.2
• /
• pp.106-113
• /
• 1987

The Alaska pollack longline operations, which consist of baiting, shooting, hauling and arrangement of hooks, are dependant on manual labour up to the present. The automation against this traditional way is necessary to eliminate the manual operations and to reduce crew. We have developed a prototype longline system suitable for Alaska pollack longline gear, which is composed of an automatic baiting machine, an automatic line hauler, a hook cleaner and storage rails. The automatic bailing machine driven by hydraulic power is precise baiting method controlled sequentially, and the automatic line hauler is to haul up the mainline by means of hydraulic power and at the same time to split every hook and to carry it onto storage rail automatically. A series functioning tests on shooting and hauling apparatus were carried out in the laboratory and at sea. The results obtained are as follows ; 1. As for the baiting machine, the exciting time of solenoid which operates a directional valve, bait feeding and cutting time, is shortened according to the increase of pressure, and also, after cutting the bait, the over-rotated angle of the blade increased in accordance with the increase of pressure. 2. The baiting efficiency is about $90\%$ when using sand lance (Hypoptychus dybowskii), and the most proper pressure of the hydraulic circuit in feeding and cutting the bait is between $13\;kgf/cm^2\;and\;20\;kgf/cm^2$. 3. The hook splitting rate of the automatic line hauler is about $95.5\%$ regardless of hauling speed and materials of snood. 4. The case of unseparating hook is appeared when the snood gets entangled or the hook is sticked in the mainline.

• Journal of Aquaculture
• /
• v.15 no.3
• /
• pp.131-138
• /
• 2002

Fed on commercial flounder diet at 20, 23 and $26^{\circ}C$ in semiclosed culture system for 32 weeks, the juvenile red drum (1.2 g) showed linear increase in daily feeding rate (DFR), growth (g/fish) and specific growth rate (SGR) with increasing temperature. In the second experimental series, the young red drum (214 g), cultured at densities of 2.16, 4.24 and 6.40 kg/$m^3$ in flow-through tanks at water temperatures from 12.3 to $27.2^{\circ}C$ for 25 weeks, grew faster at the stocking density of 2.16 kg/$m^3$ than at the densities of 4.24 and 6.40 kg/$m^3$ the difference in growth observed at the stocking densities of 4.24 and 6.40 kg/$m^3$ was not significant. The DFR and SGR were also significantly higher for the density group of 2.16 kg/$m^3$. Briefly, growth of the red drum increased with increasing tested range of temperature and was also faster with decreasing stocking density. However, the total growth (g/tank) increased with increasing stocking density.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.489-497
• /
• 2000

Since Chinese cabbages weigh 3 to 5kgf and are big in size at the time of harvest, handling operations such as harvesting, loading and unloading including transportation require the highest labor demand among all other cultivation processes. Recently, though several cabbage harvesters were developed in Japan and Europe, those harvesters were not suitable for Chinese cabbages cultivated in Korea because of the size and shape. The cabbage harvester is almost meaningless without any proper cabbage piling and pallet unloading mechanism. Most harvesters developed so far adopted a sort of slide and free falling way in collecting cabbages into the pallet. Three or four labors are usually required for cleaning incoming cabbages and loading those in the pallet. Because of the required time for piling cabbages without severe damage and the required space capacity to carry empty and loaded pallets, harvesting speed should be adjusted in accordance with time required for consecutive operations. Up to now, any automatic or semi-automatic collecting device has not been developed in the world to pile cabbages on the layer one by one into the pallet in the ordered way with little damage and to unload pallet from the harvester continuously during the harvest process. To compromise system expenses and function, Semi-automatic cabbage piling and pallet unloading mechanism was devised and it required one labor. The foldable mesh pallet with a size of 1050mm x 1050mm x 1000mm and holding capacity of around 70 cabbages was utilized. The prototype for piling and unloading mechanism was composed of three parts such as feeding device, automatic piling device with retractable bellows, and pallet unloading device. Prior to developing the prototype, the geometric properties and the amount of the damage of the cabbage caused during the piling operation were investigated. Considering the height of the pallet, a series of cabbage carrying plates were mounted to the bracket chain to lift and to carry cabbages to the loading device. Indoor laboratory experiments showed that the cabbage carrying chain conveyor worked successfully. Considering the conveying speed 0.46m/sec of the pull up belt from the cabbages on the ground, the speed of cabbage carrying chain conveyor worked property in the range of 0.26m/sec to 0.36m/sec. The system allowed the operator to modify the position of cabbage slightly. Overall system worked successfully resulting into almost same capacity without severe damage to the cabbage as human did.

• Korean Journal of Veterinary Research
• /
• v.15 no.2
• /
• pp.161-176
• /
• 1975

In order to evaluate the epizootiological influence of high-land on cattle feeding, routine hematological observation, with additional examinations of feces and general clinical condition, was conducted comparing the high-land cows resident at altitude of 800 to 1,200 meters in Daegwanryeong to the low-land cows resident at altitudes of less than 100 meters in Samcheok and Gangneung. The high-land cows were divided into 3 groups such as group A, B and C, consisting of 15, 16 and 20 adult cows respectively, and among the 3 groups only group C was exposed to abrupt high-land cold before observation. The low-land cows, that is group D, were consisted of 25 adult cows. The results obtained in the survey were summarized as follows: 1. Number of erythrocytes, concentration of hemoglobin and packed cell volume were remarkably higher (p<0.01) in all of 3 groups (group A, B and C) of high-land cows than trios of low-land cows (group D). These higher values in high-land cows were ascribable to the better feeding and hygienic management, and lesser infestation of small-type Piroplasma (Theileria) and internal parasites in contrast with the low-land cows. 2. Remarkably higher value of mean corpuscular volume (p<0.01) and a tendency to lower value of mean corpuscular hemoglobin concentration were noted in group D in contrast with group A, B and C. The reason was attributed to the higher infestation (p<0.01) of smalltype piroplasma in low-land cows in contrast with high-land cows. 3. It was noticiable that even though lesser infestation of small type Piroplama in the highland cows was shown, a natural case of clinical small-type-piroplasmosis was found in high-land group B as well as a case in the low-land group D. The blood Pattern showed characteristic macrocytic-hypochromic-anemia with increased reticulocytes in both two cases (Table 7). 4. In the observation of leukocytic series, marked increase of eosinophils in group D was seen in accordance with heavy infestation of gastrointestinal nematodes, and increased neutrophils with higher appearance of nonlobulated form and eosinopenia in group C only was observed suggesting the leukocytic response to the cold exposure in high-land. 5. Mean values of thrombocytes in group A,B,C and D were 48.4, 40.7, 42.7 and $32.3{\times}10^4/mm^3$ respcetively, and no statistically significant differences were observed.

• Applied Chemistry for Engineering
• /
• v.27 no.6
• /
• pp.599-605
• /
• 2016

Recently, photodynamic and photothermal therapies have received increasing attention as an effective cancer treatment. In this study, a gold nanorod (AuNR) colloidal solution was synthesized as a hyperthermia agent for photothermal therapy and also modified with photosensitizer (PS) for photodynamic therapy. PEG (polyethylene glycol) and FA (folic acid) ligand were also introduced into AuNR for the long circulation in human body and efficient targeting of cancer cells, respectively and AuNRs were modified with FA-PEG and poly-${\beta}$-benzyl-L-aspartate (PBLA) block copolymers through a 3,4-dihydroxy hydrocinnamic acid (HCA) linker. A series of AuNRs with various aspect ratios were synthesized by controlling the feeding ratio of $AgNO_3$. The physicochemical property and morphology of synthesized AuNR100 and FA-PEG-$P(Asp)_{50}$-HCA-AuNR100 were analyzed by UV-visible spectrophotometer, $^1H$ NMR, XPS measurements, TEM. The surface modified AuNR carrier with biocompatibility could be applied for the effective diagnosis as well tumor phototherapy.

• Nuclear Engineering and Technology
• /
• v.50 no.3
• /
• pp.356-367
• /
• 2018

A series of tests dedicated to station blackout (SBO) accident scenarios have been recently performed at the $Prim{\ddot{a}}rkreislauf-Versuchsanlage$ (primary coolant loop test facility; PKL) facility in the framework of the OECD/NEA PKL-3 project. These investigations address current safety issues related to beyond design basis accident transients with significant core heat up. This work presents a detailed analysis using the best estimate thermal-hydraulic code TRACE (v5.0 Patch4) of different SBO scenarios conducted at the PKL facility; failures of high- and low-pressure safety injection systems together with steam generator (SG) feedwater supply are considered, thus calling for adequate accident management actions and timely implementation of alternative emergency cooling procedures to prevent core meltdown. The presented analysis evaluates the capability of the applied TRACE model of the PKL facility to correctly capture the sequences of events in the different SBO scenarios, namely the SBO tests H2.1, H2.2 run 1 and H2.2 run 2, including symmetric or asymmetric secondary side depressurization, primary side depressurization, accumulator (ACC) injection in the cold legs and secondary side feeding with mobile pump and/or primary side emergency core coolant injection from the fuel pool cooling pump. This study is focused specifically on the prediction of the core exit temperature, which drives the execution of the most relevant accident management actions. This work presents, in particular, the key improvements made to the TRACE model that helped to improve the code predictions, including the modeling of dynamical heat losses, the nodalization of SGs' heat exchanger tubes and the ACCs. Another relevant aspect of this work is to evaluate how well the model simulations of the three different scenarios qualitatively and quantitatively capture the trends and results exhibited by the actual experiments. For instance, how the number of SGs considered for secondary side depressurization affects the heat transfer from primary side; how the discharge capacity of the pressurizer relief valve affects the dynamics of the transient; how ACC initial pressure and nitrogen release affect the grace time between ACC injection and subsequent core heat up; and how well the alternative feeding modes of the secondary and/or primary side with mobile injection pumps affect core quenching and ensure stable long-term core cooling under controlled boiling conditions.

• The Korean Journal of Physiology
• /
• v.15 no.1
• /
• pp.9-18
• /
• 1981

For centuries, ginseng has been used for the therapeutic purpose in oriental herb medicine. Several studies have been conducted in the past to evaluate the effect of ginseng on erythropoiesis. However the results were controversial. We therefore attempted in the present studies to evaluate the effect of ginseng on the erythropoietic activity. In one series of experiments, the recovery pattern of peripheral blood(red cell count, hemoglobin content, hematocrit and reticulocyte count) was studied in posthemorrhagic anemic rabbits. After animals were maintained with normal(control group) or 1 gm% ginseng (experimental group) diet for 2 weeks, hemorrhagic anemia was induced by withdrawing blood equivalent to 25% of the total blood volume and then changes in peripheral blood were followed for following 30 days. In other series of experiments, we studied effect of ginseng on erythrokinetics using $^{59}Fe$. $^{59}Fe(10{\sim}40\;{\mu}Ci/animal)$ was injected intravenously after animals were fed with normal (control group) or 1 gm% ginseng(experimental group) diet for 2 weeks. And radioactivities in the blood compartments were measured at appropriate intervals for 15 days. Front these various erythrokinetic parameters were estimated. Results are summarized as follows: 1) Reticulocyte count was higher in the experimental group than in the control group after 2 weeks of administration of experimental diet. During the posthemorrhagic period, the reticulocyte count increased in both the control and experimental groups, but the increase appeared much earlier in the experimental group. 2) The posthemorrhagic recoveries of hematocrit, hemoglobin content and red cell count appeared to be faster in the experimental group as compaired with the control group. 3) The half life$(T_{1/2})$ of $^{59}Fe$ in the plasma was significantly(P<0.05) shorter in the experimental group(82.6 min, N=8) than in the control group(121 min, N=6). Plasma iron turnover (PIT) of the experimental group (1.78 mg/dl/24 hr.) was approximately 4 times greater than that of the control group(0.45 mg/dl/24 hr.). 4) The maximum red cell utilization(RC-U) was 82.1% in the experimental group ana 74.5% in the control group. Red cell iron turnover(RIT) of the experimental group(1.62 mg/dl/24 hr.) was slightly higher than that of the control group(0.35 mg/dl/24 hr). 5) Erythron turnover was significantly(p<0.05) greater in the experimental group(1.27 mg/dl/24 hr.) than in the control group(0.24 mg/dl/24 hr.). Marrow transit time of the experimental group(2.05 days) tended to he faster than that of the control group(2.84 days). These results suggest that the gingseng improves the recovery of posthemorrhagic anemia and stimulates the erythropoiesis in rabbits.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.2
• /
• pp.216-225
• /
• 2006

This paper presents a new circuit topology of DC busline switch and snubbing capacitor-assisted full-bridge soft-switching PWM inverter type DC-DC power converter with a high frequency link for low voltage large current applications as DC feeding systems, telecommunication power plants, automotive DC bus converters, plasma generator, electro plating plants, fuel cell interfaced power conditioner and arc welding power supplies. The proposed power converter circuit is based upon a voltage source-fed H type full-bridge high frequency PWM inverter with a high frequency transformer link. The conventional type high frequency inverter circuit is modified by adding a single power semiconductor switching device in series with DC rail and snubbing lossless capacitor in parallel with the inverter bridge legs. All the active power switches in the full-bridge inverter arms and DC busline can achieve ZVS/ZVT turn-off and ZCS turn-on commutation operation. Therefore, the total switching losses at turn-off and turn-on switching transitions of these power semiconductor devices can be reduced even in the high switching frequency bands ranging from 20 kHz to 100 kHz. The switching frequency of this DC-DC power converter using IGBT power modules is selected to be 60 kHz. It is proved experimentally by the power loss analysis that the more the switching frequency increases, the more the proposed DC-DC converter can achieve high performance, lighter in weight, lower power losses and miniaturization in size as compared to the conventional hard switching one. The principle of operation, operation modes, practical and inherent effectiveness of this novel DC-DC power converter topology is proved for a low voltage and large current DC-DC power supplies of arc welder applications in industry.