• Journal of Biosystems Engineering
• /
• v.24 no.2
• /
• pp.145-152
• /
• 1999

Methods of discharging each graded agricultural product are divided into two according to the type of feeding. One is based on feeding objects using a series of specially designed holders mounted with an equal interval. The other is randomly feeding objects while being isolated without a specific interval. In this paper, a real time simultaneous discharge algorithm, which is good for objects randomly fed individually and for multi-objects located along a series of discharge buckets, was developed. And the developed algorithm was implemented to the controller and the performance was verified using the system developed for dried mushrooms. The discharge system used for the experiment was composed of a variable speed conveyor, a series of double channel bucket mounted along both sides of the conveyor, and a series of air nozzles and optic sensors. Developed algorithm worked perfectly and could be directly used for automatic discharge system for randomly feeding agricultural products.

• Journal of Korea Foundry Society
• /
• v.29 no.6
• /
• pp.277-283
• /
• 2009

Recently an increase in production cost of 300 series stainless steel with a sudden increase in nickel cost has caused a decrease in demand for 300 series stainless steel so that 400 series stainless steel has begun to make a mark. Although 400 series stainless steel has good properties, it has a problem of lack of corrosion resistance. There is Ti in 400 series stainless steel alloys to solve the problem above and it has lower density than the others. For that reason, wire feeding process has been applied for adding Ti alloy in 400 series stainless steel. This paper presents consideration of variation on the depth of wire dissolution by conditions of wire feeding which are wire injection speed, the temperature of molten steel, wire diameter and bubble generation rate. The computer program for solution of conducting wire feeding has been developed in Flow3D.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.4
• /
• pp.393-400
• /
• 2002

In this paper, a novel series feeding cross-aperture coupled microstrip antenna with the effect of hybrid feeding is proposed and demonstrated experimentally to improve narrow axial ratio bandwidth of cross-aperture coupled antenna with single feeding among the various methods for generating circular polarization. The validity of a proposed series feeding cross-aperture coupled microstrip antenna is shown by comparing experimental results between the reported and the proposed microstrip antenna, and 2${\times}$2 array microstrip antenna based on the proposed single microstrip antenna used sequential rotation technique to accomplish broader axial ratio bandwidth. In the proposed single and 2${\times}$2 array microstrip antenna, the measured axial ratio bandwidths are 110 ㎒(4.6%) and 420 ㎒(17.5%), maximum gains are 8.2 ㏈i and 12.5 ㏈i, 3 dB gain bandwidths are above 400 ㎒(16.7%), and impedance bandwidths for the VSWR<1.5 are 240 ㎒(10%) and 500 ㎒(20.8%), respectively.

• ALGAE
• /
• v.36 no.1
• /
• pp.51-60
• /
• 2021

The sea urchin, Mesocentrotus nudus, is widely distributed in North West Pacific regions. It has a substantial impact on macroalgal communities as a generalist herbivore. This study examined various aspects of its feeding ecology, including algal preference, foraging behaviors, and possible effects of past feeding history on its algal preference. We used six common algal species (Ulva australis, Undaria pinnatifida, Sargassum confusum, Dictyopteris divaricata, Grateloupia elliptica, and Grateloupia angusta) from the east coast of Korea as food choice in a series of indoor aquarium experiments. The first choice of starved M. nudus was exclusively U. pinnatifida, followed by G. elliptica and S. confusum. Unlike large urchins, small urchins equally preferred U. pinnatifida and G. elliptica. On the other hand, Undaria-fed urchins preferred to feed only G. elliptica, although its preference slightly differed over time. We then grouped sea urchins into three categories (starved, Undaria-fed, mixed species-fed) to observe 12-days feeding preference as well as early foraging movements. Foraging behaviors of the three groups were distinctively different, although they could not completely reflect the actual consumption. For example, U. australis was highly attractive, but rarely eaten. Undaria-fed urchins seemed to stay with only S. confusum and U. australis. This study demonstrates that M. nudus shows high flexibility in food preference depending on past feeding history and body size. Its foraging behaviors are also affected by past feeding conditions, exhibiting active chemoreceptive movements.

• Journal of Korean Academy of Nursing
• /
• v.40 no.2
• /
• pp.277-286
• /
• 2010

Purpose: This study was done to investigate the effects of breast-feeding education and support services on rate of breast-feeding three and six months after birth, and the effect on infant's growth (weight, height, body mass index [BMI]). The experimental group which had both education and support services was compared with the control group which had only breast-feeding education. Methods: This study was a quasi-experimental study with a time-series design. The participants were 39 mothers who were hospitalized for childbirth. Twenty mother were assigned to the experimental group and 19 mothers, to the control group. The breast feeding education was done during hospitalization, and support services were provided once a week after discharge for a month (a total 4 times) by a maternity ward nurse. Data regarding breast-feeding rate at one month after childbirth was collected by phone call; the breast-feeding rates at three and six months after childbirth were collected in a visit to the families. The child's weight and height were also measured during the visit. Results: The experimental group had a statistically significant higher rate for frequency of breast-feeding at one, three and six months after childbirth than the control group. However, there was no meaningful difference between the two groups for infant growth. Conclusion: The results of this study suggest that breast-feeding education is helpful for a start, but support services are also necessary to sustain breast-feeding.

• Journal of Korea Foundry Society
• /
• v.33 no.6
• /
• pp.248-253
• /
• 2013

To add alloying elements into a pure copper melt, the wire-feeding efficiency of cored (alloy containing) wire was evaluated using a commercial, computational fluid-dynamics program. The model design was based on an industrial-scale production line. The variables calculated included wire feed rate, melt temperature, wire diameter, melt flow rate and wire temperature. Efficiency was evaluated after a series of calculations based on the penetration depth of the alloy-wire into the molten copper bath. Of the five variables investigated, the wire feed rate and wire diameter were the most influential factors affecting the feeding efficiency of the cored-wire.

• Proceedings of the KIPE Conference
• /
• 1998.11a
• /
• pp.18-22
• /
• 1998

A PWM inverter with an induction motor often has a problem with a high frequency leakage current that flows through stray capacitor between stator windings and a motor frame to ground. This paper presents an equivalent circuit for high frequency leakage currents in PWM inverter feeding an induction motor, which forms an LCR series resonant circuit. A conventional common mode ckoke or reactor in series between the ac terminals of a PWM inverter and those of an ac motor is not effective to reduce the rms and average values of the leakage current, but effective to reduce the peak value. Furthermore, this paper proposes a leakage current damper which is different in damping principle from the conventional common mode choke. It is shown theoretically and experimentally that the leakage current damper is able to reduce the rms value of the leakage current to 25%, where the core used in the leakage current damper is smaller than that of the conventional common-mode choke

• Journal of Biosystems Engineering
• /
• v.26 no.1
• /
• pp.11-20
• /
• 2001

Experiments under the stationary and harvesting condition, were performed in order to investigate the vibration characteristics of a head-feeding combine. 6 degrees of freedom components of acceleration at the location of the center of the gravity, and 3 degrees of freedom components of acceleration at the location of the operator seat were measured independently. The vibration characteristics of the combine were estimated with the power spectral density of the time series data of accelerations. From this research, the following results were obtained. 1. Vibration of a head-feeding combine under the stationary condition(engine, thresher and cutter are driven without harvesting) is mainly influenced by the engine. Further, 1/3, 1/2 (sub-harmonic) frequency components of the engine are observed besides engine driving frequency component(45Hz). 2. Vibration of a head-feeding combine under the harvesting condition is influenced by the engine, threshing unit and driving unit. Namely, some kinds of vibration frequency components in harvesting are observed compared with stationary condition. Further, sub-harmonic frequency components of the engine are observed besides engine driving frequency component as same as stationary condition. From these results, it may be concluded that vibration of a head-feeding combine is characteristics of semi-periodic and nonlinear vibration.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.221-224
• /
• 1998

A PWM inverter with an induction motor often has a problem with a high-frequency leakage current that flows through the distributed electrostatic capacitance from the motor windings to ground. This paper presents an equivalent circuit for high-frequency leakage currents in PWM inverter feeding an induction motor, which forms an LCR series resonant circuit.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.1
• /
• pp.35-41
• /
• 1997

A series-fed microstrip array antenna of beamwidth $10^{\circ}$, squint angle $80^{\circ}$ and SLL -15 dB below is designed. Series-fed arrays are formed by interconnecting all the elements by high-impedance transmission lines and feeding the power at the first element and it is a traveling-wave antenna which is terminated with a matched load. Radiation patterns and impedance matching of the antenna are analyzed by Ensemble 4.0, which is a popular software package for designing printed antennas and arrays. The squint angle of beam can be controlled by the spacing between the elements. The major advantages of series-fed array antennas are that feed arangement is compact and the losses associated with the feeding network are less than those of a corporate feed type. The antennas are fabricated on the RT/Duroid Laminates of 62 mil thickness. The experimental results are very close to the specifications to be designed.