• Structural Engineering and Mechanics
• /
• v.41 no.3
• /
• pp.395-406
• /
• 2012

Basic problem of pile foundation is three dimensional in nature. Three dimensional finite element formulation is employed for the analysis of pile groups. Pile, pile-cap and soil are modeled using 20 node element, whereas interface between pile or pile cap and soil is modeled using 16 node surface element. A parametric study is carried out to consider the effect of pile spacing, number of piles, arrangement of pile and soil modulus on the response of pile group. Results indicate that the response of pile group is dependent on these parameters.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.3
• /
• pp.29-35
• /
• 2011

This study draws economic expense factors according to the influence of generation resulted from slipstream and the arrangement of the complex when arranging and designing the complex for offshore windpower development as a model of 50MW offshore wind farm and conducts economics analysis. According to the result of the analysis, O (Optimize) arrangement was the one that has the highest generation for having the best windpower resources in terms of design and being least affected by slipstream; however, the arrangement requires expensive submarine cables and high installation cost. Therefore, according to the analysis of economics, it was thought that 50MW complex should have less economics as BC ratio 0.95 than the series arrangement of main wind direction and I+80 series arrangement would be rather more economical. This economics evaluation provides comparison according to the arrangement of the development complex considering the uncertainty of the electricity price and gross construction cost. And it is expected that the result of economics evaluation would greatly differ by installation capacity, and the reason is that the cost of electric infrastructure takes up a higher portion than the gross construction cost of the development complex. The only way to compensate this part is to make the windpower development complex larger. It seems that it will be necessary to enhance spot applicability to evaluate economics afterwards and pay consistent attention to and conduct follow-up research on the economics evaluation of the complex construction.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.5
• /
• pp.655-667
• /
• 2010

In this study, problems with table serving of Korean Jeollanamdo food were investigated, and methods for improvement were suggested. The manner of food serving and arrangement on tables, as well as the serving space in each case, were investigated in representative restaurants serving Jeollanamdo food. The results showed that most of the Jeollanamdo Korean food have a prototype of a flat serving sprea, wherein the main dish and side dishes are not clearly identified, the demarcation between shared space and personal space is insufficiently made for each serving on the table, and the table is full of side dishes, that are narrow, visually disordered and unhygienic, both in terms of the table setting and arrangement inside bowls. To provide sufficient eating space, elevate awareness of hygienic and clean serving, and identifying the main dish in the table setting, a serving method that is a compromise between the flat spread-out and time-series development was suggested, and an arrangement on the table was defined for the main dish and side dishes. The utilization of table space was also increased by reducing the number of dishes on the table at a given moment. In addition, the dish or bowl and arrangement inside the container were changed in order to distinguish the main dish and side dishes. It is suggested that some of tableware be linked with the special products of the locality so as to make a brand for them, and that a personal mat be used to arrange the tableware for each one, since there are many fermented food items (salted fish, kimchi, fermented paste and sauce, etc.) and boiled food items (stew, steamed dish, boiled dish in sauce, etc) that look dark and unfocused. In addition, it is suggested that the width and breadth of the dishes or bowls be set in an orderly manner. Considering the tables currently available at restaurants, personal space on a table and comfortable distance between eaters are suggested to be $400 mm{\times}250 mm$ and 300 mm, respectively.

• The Korean Journal of Archival Studies
• /
• no.7
• /
• pp.37-74
• /
• 2003

An Old document(Diploma) is a historical and unique record, so it must be collected, arranged, and preserved for research as soon as possible. Especially, for the effective use of the Old Document(Diploma), it is needed to arrange and describe the material systematically on the ground of modern archival theory. The Kyujanggak Archives in the Seoul National University has published 23 volumes of Old document(Diploma) material Old Document(Diploma). But they seem to cause the readers inconvenience, because the materials are classified and gathered only by genre, the titles or the orders of the materials are not standardized, and there is no description about the content of each Old document(Diploma). Jangseo-gak Library in The Academy of Korean Studies has also published the series of Old document(Diploma) material Old Document(Diploma) Collection. However the case is not different, since they are all mixed up with materials classified and gathered by genre, family, academy, or local school. And a great part of the materials have no titles and no description about the content of each Old document(Diploma), either. About the arrangement and description of the records, European and American archival science has established the theory of l)the principle of provenance, 2)the principle of original order, 3)levels of control, 4)collective description. These theories are valuable for the effective use of Old document(Diploma). On the viewpoint of the principle of provenance, Old document(Diploma) materials should not be classified by subject and genre, but by family and person. Then, the Old document(Diploma) materials, after collected by the unit of family or person on the viewpoint of the principle of provenance, should be arranged in their original order for more detailed arrangement and furthermore, for the work to find their relationship. This is so called the principle of original order. The hierarchical management of the Old document(Diploma) materials, for example, classifying by record group, sub-group, series, item and so on, is the concept of the levels of control, and comprehensive description of the each hierarchical structure is the concept of the collective description. Let's apply these archival theories to 34 pieces of the Chung, Man-Seok's material in the series of Old document(Diploma) material Old Document(Diploma). First, collect the Old document(Diploma) materials into Chung, Man-Seok's collection(the principle of provenance), which were scattered in the series classified by genre. Secondly, rearrange them chronologically(the principle of original order), and then we can find the comprehensive information about Chung, Man-Seok. For the hierarchical management of the Old document(Diploma) materials, we should establish a few concepts from the general, large group to specific, small item. The concepts can be organized as following; l)record group(Chung, Man-Seok record group) - 2)sub-group(personnel document, property document, family document, social activity document, political activity document, etc) - 3)series(gyoji-series, gyoseo-series, yuji-series etc. in the personnel document) - 4)folder(document with additions) - 5)item(one document). According to the the theory of the collective description, in the level of record group, there should be a collective description of Chung, Man-Seok's biography or a summary of record group. Similarly, there should be a collective description of a summary of sub-group in the level of sub-group and a summary of series in the level of series.

• Journal of the Korean Society of Food Culture
• /
• v.28 no.1
• /
• pp.31-40
• /
• 2013

The purpose of this study is to analyze external elements of 'time series table serving' and to discover any problems in the table setting. We selected two traditional Korean restaurants in five-star hotels and two representative traditional Korean style restaurants and analyzed the tableware arrangement of their table settings. The results are as follows. In restaurant A, the arrangement of different styles of tableware made from a variety of materials seemed relatively natural. However, the dessert plates were 'Buncheong' ware made with 'Bakji' method; in this case, the pattern was larger than the size of the fruits served and made the food inconspicuous. Rather than using plates made with a 'bakji' method, using plates with small patterns in the 'johwa' method would complement the food. In restaurant B, the space between the tableware, spoon and chopsticks was narrow, and the spoon and chopsticks sets would not fit on the table pads when large dishes or multiple dishes were served. In this case, changing the dishes to smaller sized dishes, considering the size of the table pad, or not using the pad at all would solve the issue. In restaurant C, too many small dishes were laid on the table, making it look disorderly. We believe that recovering tableware that is no longer in use, laying dishes and cutlery inside of the table pads or not using the table pad would be better. In restaurant D, the same style and color of dishes were provided 9 times. The lack of variety could be tedious to customers. The forms and colors of dishes should be changed in accordance with the order of the meal served. However, when using tableware created by different methods such as 'Buncheong' ware or white porcelain, the same pattern should be chosen in order to elevate the dignity of the table menu through uniformity. These issues in tableware arrangement indicate that external forms of banquet table setup should be studied so that the culture of Korean traditional cuisine can be enriched.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.9 s.102
• /
• pp.1060-1069
• /
• 2005

Silencers are engineering devices that are designed to attenuate sound waves propagating in a flowing medium. The muffler type silencer has a series of chambers in parallel or series utilizing the reflection and expansion characteristics of the expansion chambers, sidetubes, branch resonators, and tailpipes to attenuate the sound. To Improve the performance of industrial blower silencer of muffler type which is employed in petrochemical plant, this paper seeks its optimal arrangement of buffs by experimental method and suggests optimal arrangement of buffs. Experimental results show that the optimal one suggested can reduce the noise level as much as 14 dB (or 18 dB(A)) in the laboratory and as much as 4 dB(A) compared to that of the existing silencer on the ground.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1678-1680
• /
• 2005

This paper presents Building Integrated Photovoltaic system of the balcony type which is influenced by conditions such as irradiation, module temperature, shade and array arrangement. When architecture component, trees and cloud shade connecting array in series, total PV array current is reduced. So, before PV system design, a planner have to simulate many situations. And then array should be composed suitable for parallel and series modules. By the results, it is very important to develop optimal design of array considering shade effect for the balcony PV system.

• Structural Engineering and Mechanics
• /
• v.83 no.2
• /
• pp.153-166
• /
• 2022

Structural pounding due to strong seismic excitations can result in severe damage or even collapse of colliding structures. Many researchers focused on studying the mutual pounding between two adjacent structures while very few researches were concerned with the pounding of a series of structures. This paper aims to study the pounding effect on a series of four buildings having different natural frequencies. The paper also investigates the effect of different arrangements of the four buildings on their pounding response. For this, a mathematical model was constructed using Matlab code where, pounding was modeled using a contact force-based approach. A Non-Linear viscoelastic (Hertzdamp) contact element was used and activated only during the approach period of collision. The mathematical model was validated by comparing its prediction versus experimental results on three adjacent buildings. Then the model was used to study the pounding between four adjacent structures arranged in different sequences according to their natural frequencies. The results revealed that increasing the gap distance generally led to decrease the peak responses of the towers. Such response is somehow different from that predicted earlier by the authors for the case of three adjacent buildings. Moreover, the arrangement of towers has a significant effect on their pounding response. Significant difference between the natural frequencies of adjacent structures increases the pounding forces especially when the more flexible buildings are located at the outer edge of the series. The study points out the need for further researches on buildings in series to gain a better understanding of such complex phenomena.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4136-4141
• /
• 2013

One of the most significant requisite that should be considered for effective rapping of the electrostatic precipitator using electromagnetic vibration exciter is vibration acceleration and resonance frequency of collecting plates. This vibration acceleration shows its peak points when natural frequencies of the system are corresponded with excitation frequency from the power source, and effective rapping performance can be expected. In this research, extend view of single electrostatic precipitator using one electromagnetic vibration exciter, the system was remodeled by arrangement of the exciters in view of multiple modules of the electrostatic precipitator in fields. And vibration acceleration measurement experiment is performed and measured values are compared with these remodeled systems. By this experimental comparison in series and parallel arrangement, effectiveness of arrangement methods for the electromagnetic vibration exciter, expected rapping performance, and power consumption are verified.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.12
• /
• pp.1294-1301
• /
• 2008

Under passive RFID environment, this paper presents a new localization of a mobile robot traversing over the floor covered with tags, which is superior to existing methods in terms of estimation performance and cost effectiveness. Basically, it is assumed that a mobile robot is traveling along a series of straight line segments, each segment at a certain constant velocity, and that the number of tags sensed by a mobile robot at each sampling instant is at most one. First, for a given line segment with known starting point, the velocity and position of a mobile robot is estimated using the spatial and temporal information acquired from the traversed tag. Some discussions are made on the validity of the basic assumptions and the localization for the initial segment with unknown starting point. Second, for a given tag distribution density, the optimal tag arrangement is considered to reduce the position estimation error as well as to make easy the tag attachment on the floor. After reviewing typical tag arrangements, the pseudorandom tag arrangement is devised inspired from the Sudoku puzzle, a number placement puzzle. Third, through experiments using our passive RFID localization system, the validity and performance of the mobile robot localization proposed in this paper is demonstrated.