• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.671-676
• /
• 2010

In this paper, an effort has been made to design and develop a meteorological data logger for meteorological purpose. This data logger is proposed to be included various sensor interface that used in weather sensors. Besides, numbers of meteorological process libraries are added into this data logger to make it able to perform as unattended weather monitoring system. Data output of this data logger are also design to support multiple protocol that commonly used in data logger, and several communication devices that commonly used in the market. Each data that logged will be logged together with date and time and able to retrieve via serial port using hyper terminal. It is also configurable via serial port.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2971-2973
• /
• 2000

In this paper, we proposed the implementation of multiple access serial communications with improved transmission control. For serial communications. RS232 protocol is used and the transmitting data and is merged to form data channel. Multiple host access is configures by using the common data channel and ground channel. 8bit data transfer with variable frame size is transferred by using the 16bit host ID. Packet is composed of HEADER, receiver ID. variable length data frame, TAIL and CRC informations. Multiple hosts are allowed to transfer packet with the other hosts through the common communication channel. Byte-stuffing is used to differentiate the transfer rate of PC is performed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1313-1318
• /
• 2011

This paper proposes a protocol integration system with multi-threading method for the ship electronic devices to solve problems with the compatibility. The proposed protocol integration system receives the different signals from each of the ships' devices through the RS-232 serial communication port and then divides the input signal into the field data. The required field data for standard signal composition are extracted from among these signal and these are combined in accordance with standard signal format. Thereafter, the protocol integration system transmits the processed standard signal to the auto pilot system through a single port.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.7
• /
• pp.1603-1609
• /
• 2010

This Paper deals with a design, making a prtotype and test methods of Real-time towed Line Array Sensor Data processing board for fast data communication and long range data transmission with SFM(Serial FPDP Module) through Optic-fiber channel. Towed line array sensors are installed in Frigate and the each LAS A, B, C group data from LAS is packed a previously agreed protocol and transmitted to the signal processing unit. Considering the limited space of VME 6U size, LAS Data processing board is designed with MPC8265 PowerPC Controller of Freescale for main system control and Altera's CycloneIII FPGA for sensor data packing, self-test simulation data generation, S/W FIFO et cetera. LAS Data processing board have VxWorks, the RTOS(Real Time Operating System) that present many device drivers, peripheral control libraries on board for real-time data processing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1610-1618
• /
• 2014

Wearable computer systems can use the wireless universal serial bus (WUSB) that refers to USB technology that is merged with WiMedia PHY/MAC technical specifications. In this paper, we focus on an integrated system of the wireless USB over the IEEE 802.15.6 wireless body area networks (WBAN) for wireless wearable computer systems supporting U-health services. And a communication structure that performs the hibernation for low power consumption is proposed for WUSB over IEEE 802.15.6 hierarchical protocol. In the proposed hibernation mechanisms, WUSB communications are permitted at each m-periodic inactive periods of WBAN superframes by using the WBAN information of Wakeup Period and Wakeup Phase message fields. In our performance evaluations, performances according to amount of WUSB traffic and Wakeup Periods are analyzed respectively to evaluate the effectiveness of proposed hibernation structure in WUSB over IEEE 802.15.6.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.3
• /
• pp.11-17
• /
• 2003

In this paper, we implemented 2-wire (data gnd) RS232C serial communication interface by applying the Collision Sensing Multiple Access(CSMA) Protocol. The transmitting and receiving wires of RS232C pert are connected together by the interface circuit forming data wire without hardware modification On two-wired common channel connection simultaneous transmission Don mere than two hosts causes data collision. The collision is detected by loop-back test of transmission data comparing with the fed back data to detect the data distortion. Various models are adopted to reduce the probability of retransmitted data collision and experiments show the performance of each cases. Due to allowing multiple hosts to be accessed through the common communication channel with minimum circuit addition the result of this paper can be easily applied for conventional RS232C instruments and machines to connect to the single data communication line.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3159-3161
• /
• 1999

This paper aims at developing remote control system to control and monitor distributed various devices through internet or information communication network. SNMP (Simple Network Management Protocol) and UPS (Uninterruptible Power Supply) are adopted for network management protocol and applied device, respectively. For controlling and monitoring distributed devices in real-time, Java-environment software is constructed. Also, general-use interface controller between network device and applied device is proposed. Finally, serial communication such as RS-232 and RS-485 is used between controller and applied device.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.11
• /
• pp.895-901
• /
• 2013

In this paper we propose design of a multi-protocol gateway middleware based on USN. The proposed multi-protocol gateway middleware defined the transmit messages format, and were used the USN module interface protocol for connect to external application MCU using the UART. In this case, the gateway was checks the communication state of Zigbee module with settings information, and setting Zigbee serial PDU format. The experimental results of the proposed multi-protocol gateway middleware were proved the efficiency of integrate protocol gateway to use the multi-protocol gateway than gateway to using the repeater through the power control and communications a controlled experiment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.10
• /
• pp.29-35
• /
• 2009

This paper handles, implementation of multiple access bidirectional serial communications protocol using DC power lines. The normal voltage of the power communication line maintains 24[V] corresponding to level 1 and the host drops the voltage to 12[V] on sending level 0 signal, also the clients normally keeps the line voltage to 24[V] use pull-down circuit to drop the voltage to 12[V] on sending level 1 signal. Host senses the voltage level of the power communication lines and the hosts switches power source from 24[V] to 12[V]. Experimental circuit is designed with one hosts and four clients and verified the power line voltage switching operation depending on the data signal levels on the power line.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.11
• /
• pp.2385-2390
• /
• 2010

The PRC-999K radio widely used in Korean Army is half-duplex and also has the broadcasting radio wave character that all subscribers listen when one subscriber speaks in time. The radio data communication system configures a 1:1 unicast network between a command post and network members in a military fire control system. The system also applies CSMA/CA technique to avoid data collision and additionally applies SDLC protocol for efficiency and fast communication. This paper shows that allocating address to network members in serial order can reduce data transmitting/receiving time, and thereby a command post needs to broadcast data only one time and the assigned members can reply in order without data collision. It is validated through an experimental test.