• Journal of Korea Game Society
• /
• v.9 no.5
• /
• pp.137-144
• /
• 2009

This paper predicts 6 facial regions that may have sharply different scattering properties, rendering the face more realistically based on their diffusion profiles. The scattering properties are acquired in the form of high dynamic range by photographing the pattern formed around an unit ray incident on facial skin. The acquired data are fitted to a 'linear combination of Gaussian functions', which well approximates the original diffusion profile of skin and has good characteristics as the filter. During the process, to prevent its solutions from converging into local minima, we take advantage of the genetic algorithm to set up the initial value. Each Gaussian term is applied to the irradiance map as a filter, expressing subsurface scattering effect. In this paper, to efficiently handle the maximum 12 Gaussian filterings, we make use of the parallel capacity of CUDA.

• Applied Chemistry for Engineering
• /
• v.30 no.2
• /
• pp.198-204
• /
• 2019

Polymer composites are widely used as industrial materials requiring high mechanical properties. Glass fibers and fillers, which are used as a reinforcement in composites, usually have some problems such as nonuniform dispersion and poor interfacial adhesion. In this study, an acrylic acid-modified polyethylene wax was synthesized by the sequential reaction of pyrolysis of polyethylene followed by grafting with a polar acrylic acid. The acrylic acid-modified polyethylene wax was applied to polymer composites of the polyamide matrix and glass fiber reinforcement. The effect of acrylic acid-modified polyethylene wax on physical properties of polyamide based composites was thoroughly investigated.

• Macromolecular Research
• /
• v.10 no.2
• /
• pp.54-59
• /
• 2002

ABA triblock copolymers of L-lactide and trimethylene carbonate with several different compositions were prepared by sequential ring-opening polymerization in the presence of diethylene glycol. Also chain-extension reactions of the resulting copolymers were carried out using hexamethylene diisocyanate to produce relatively high molecular weight polymers, which could be cast into elastomeric tough films. The polymers with certain L-lactide contents were partially crystalline, exhibiting two-phase morphology. The polymer films showed reversible elastic behavior under tensile tension, providing a novel thermoplastic elastomer possessing desirable properties such as biodegradability and good mechanical properties.

• Korean journal of food and cookery science
• /
• v.18 no.3
• /
• pp.340-348
• /
• 2002

Changes in the physicochemical properties of frying oil after single or repeated use in foodservice establishments were studied. The experiment was designed to simulate the practical frying practice based on a survey from the dieticians in the food service establishments. Used oils came from the single frying of mackerel and the sequential frying of 1) potato and mackerel, 2) battered pork and mackerel, and 3) potato, battered pork, and mackerel. The used oil samples were analyzed and compared with the fresh one. Oil quality parameters such as acid value, peroxide value, thiobarbituric acid value, iodine value, viscosity, and color were measured at each step of deep-fat frying. The physicochemical properties of the frying oils have been more or less affected by the frying conditions. However, the used oils resulted from the experimental trials were within the range of acceptance as indicated by the acid and peroxide values.

• Tunnel and Underground Space
• /
• v.4 no.2
• /
• pp.102-118
• /
• 1994

Thermomechanical analysis is conducted on the radioactive repository in deep rock mass considering the in-situ stress, excavation and thermal loading of a radioactive waste. Thermomechanical properties of a discontinuous rock mass are estimated by a theoretical method so called sequential analysis. Using the estimated properties as input for finite element analysis, the influence on temperature distribution and thermal stress is analyzed within the scope of 2-dimensional steady state and transient heat transfer and coupled thermal elastic plastic behaviour. Granitic rock mass is taken for this analysis. The analysis is done for two different rock mass conditions, i.e. continuous-homogeneous and highly jointed conditions, for the purpose of comparison. In the case of steady state, the extent of disturbed zone around the storage tunnel due to the heat production of the spent-fuel canister varies depending on the thermomechanical properties of the rock mass. In the case of transient analyses, the response of the jointed rock mass to the thermal loading after radioactive waste disposal varies significantly with time, resulting in dramatic changes in the both size and location of disturbed zone.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.75.1-75.1
• /
• 2013

Atomic layer deposition (ALD) and molecular layer deposition (MLD) are based on sequential, self-limiting surface reactions that produce atomic layer controlled and conformal thin film growth. ALD can deposit inorganic films and MLD can deposit films containing organics. ALD and MLD can be used together to fabricate a wide range of hybrid organic-inorganic alloy films. The relative fraction of inorganic and organic constituents can be defined by controlling the ratio of the ALD and MLD reaction cycles used to grow the film. These hybrid films can be tuned to obtain desirable mechanical, electrical and optical properties. This talk will focus on the growth and properties of metal alkoxide films grown using metal precursors and various organic alcohols that are known as "metalcones". The talk will highlight the tunable mechanical properties of alucone alloys grown using Al2O3 ALD and alucone MLD and the tunable electrical conductivity of zincone alloys grown using ZnO ALD and zincone MLD with DEZ and hydroquinone as the reactants.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1994.10a
• /
• pp.175-182
• /
• 1994

As for the safety evaluation of existing large-scale structures, methods for estimation of the structural and dynamic properties are studied. Sequential prediction error method in time domain and improved FRF estimator in frequency domain are comparatively studied. For this purpose, impact tests of 2 bay 3 floor steel frame structure are performed. Results from both methods are found to be consistent to each others, however those from the finite-element analysis are slightly different from experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.87-92
• /
• 1991

A naphtha reforming process treats the feed naphtha for the production of BTX and high octane gasoline. In this paper, the development of NAFOS (Naphtha Reformer Steady-State Simulator), which is the efficient tool for the wide range of reforming process studies, is presented. NAFOS system is based on the sequential modular approach and composed of unit computation routines, physical properties data base, numerical routines, flowsheet convergence routine and user interfaces for input-output control. The developed NAFOS system has been tested by computation of the UOP Platforrming process. Simulation results of NAFOS corresponded with that of established general purpose simulator (ASPEN PLUS), and faster for the same simulation case.

• Journal of Electrical Engineering and information Science
• /
• v.3 no.2
• /
• pp.145-150
• /
• 1998

For practical application of the concept of chaos, we propose a chaotic state machine as a sequential system. Chaotic state machine which is suggested and implemented in this paper has chaotic motions relying on the dynamics only through the deterministic chaos function. Also, we present and verify that the properties of chaotic state machine is equal to the characteristics of chaos.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1386-1388
• /
• 2009

We report on a new method of fabricating color filters based on selective wetting of color inks. The reversible formation of a hydrophobic layer provides sequential generation and protection of successive color filter patterns through a simple coating process. The transmittance and geometrical properties of the fabricated color filter were described.