• Journal of Korean Society for Quality Management
• /
• v.32 no.3
• /
• pp.141-152
• /
• 2004

This study describes process and method to establish concurrent and/or sequential schedule planning for the system design process of the EIA632 standard. For this purpose, the study suggest Process and method that are context analysis of standard process, interface definition from activity decomposition, integration of related activities, and definition of concurrent and/or sequential work flow. The proposed process and method will contribute to minimize time loss that is emerged from activities iteration.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.509-512
• /
• 2006

In this paper, we proposed the novel device and process design to enhance the uniformity of low-temperature poly-Si TFTs fabricated by sequential lateral solidification (SLS). The proposed design schemes can avert the conventional two-shot SLS process-induced issues. Moreover, different design considerations between conventional excimer laser crystallization and the SLS process were also proposed and discussed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.1
• /
• pp.109-116
• /
• 2008

Model matching problem of asynchronous sequential machines is addressed in this paper. The main topic is to design a corrective controller such that the closed-loop behavior of the asynchronous sequential machine can follow a given model, i.e., their models can be "matched" in stable states. In particular, we assume that the considered asynchronous machine suffers from the presence of an input disturbance that can cause undesirable state transitions. The proposed controller can realize both model matching and elimination of the adverse effect of the input disturbance. Necessary and sufficient condition for the existence of a corrective controller that solves model matching problem is presented. Whenever controller exists, algorithms for their design are outlined and demonstrated in a case study.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.3
• /
• pp.205-210
• /
• 2006

Curve tessellation, which generates a sequence of points from a curve, is very important for curves rendering on a computer screen and for NC machining. For the most case the sequence of discrete points is used rather than a continuous curve. This paper deals with a method of tessellation by calculating the maximal deviation of a curve. The maximal deviation condition is introduced to find the point with the maximal chordal deviation on a curve segment. In the previous research a curve tessellation was tried by the subdivision method, that is, a curve is subdivided until the maximal chordal deviation is less than the given tolerance. On the other hand, a curve tessellation by sequential method is tried in this paper, that is, points are generated successively by using the local property of a curve. The sequential method generates relatively much less points than the subdivision method. Besides, the sequential method can generate a sequence of points from a spatial curve by approximation to a planar curve. The proposed method can be applied for high-accuracy curve tessellation and NC tool-path generation.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.32 no.4
• /
• pp.109-120
• /
• 1983

This paper presents standard program which can be used in the software realizations of sequential logic circuits. Thy are simple, flexible, and independent of applications and operate in the same way that man decides next states and outputs using the state transition table. With proposed programs, designers who aren't familiar with microprocessors and programming techniques will be able to design sequential logic circuits easily. Examples are illustrated, in order to prove their flexibility and adaptability, using Z-80 microprocessor.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.5
• /
• pp.896-904
• /
• 1987

In this paper, a design method for sequential circuit which is easy to have Built-in Self Test is kproposed using the functional advantages of multifunctional BILBO and LSSD. To achieve the hardware reduction, it is designed that a multifunctional BILBO has double operational functions of NLFSR and LFSR, when neccessary, and that test signal could be used as an input-output signal in the same line. By applying the proposed multifunctional BILBO to the sequential PLA, the test patterns and the additional circuit could be reduced in test operation and the propagation delay is vanished in normal operation, as we expected. Above them, the partitioned method for large scale sequential circuit is also suggested and it is observed that test patterns and additional circuit in them reduced by this method.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.5
• /
• pp.543-551
• /
• 2011

The paper deals with the comparative study of design optimization based on various approximation techniques in strength design of riser support structure installed on floating production storage and offloading unit(FPSO) using offshore operation loading conditions. The design optimization problem is formulated such that structural member sizing variables are determined by minimizing the weight of riser support structure subject to the constraints of structural strength in terms of loading conditions. The approximation techniques used in the comparative study are response surface method based sequential approximate optimization(RBSAO), Kriging based sequential approximate optimization(KBSAO), and the enhanced moving least squares method(MLSM) based approximate optimization such as CF(constraint feasible)-MLSM and Post-MLSM. Commercial process integration and design optimization(PIDO) tools are employed for the applications of RBSAO and KBSAO. The enhanced MLSM based approximate optimization techniques are newly developed to ensure the constraint feasibility. In the context of numerical performances such as design solution and computational cost, the solution results from approximate techniques based design optimization are compared to actual non-approximate design optimization.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.10
• /
• pp.1079-1086
• /
• 2013

Optimal mount position of a front pillar trim considering heat resistant characteristics can be determined by two methods. One is conventional approximate optimization method which uses the statistical design of experiments (DOE) and response surface method (RSM). Generally, approximated optimum results are obtained through the iterative process by a trial and error. The quality of results depends seriously on the factors and levels assigned by a designer. The other is a methodology derived from previous work by the authors, which is called sequential design of experiments (SDOE), to reduce a trial and error procedure and to find an appropriate condition for using artificial neural network (ANN) systematically. An appropriate condition is determined from the iterative process based on the analysis of means. With this new technique and ANN, it is possible to find an optimum design accurately and efficiently.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.25 no.3
• /
• pp.35-45
• /
• 1988

This paper presents a sophisticated Sequential Linear Approximation Method(SLAM) to solve nonlinear optimization problem and the performance of this method is compared with those of the Penalty Function Method(SUMT), Tangent Search Method(TSM) and Flexible Tolerance Method(FTM). To improve the convenience and flexibility in using the proposed SLAM, an user oriented design optimization language is developed and the application examples are shown for the optimization of propeller principal dimensions and the optimization of bulk carrier principal particulars.

• Structural Engineering and Mechanics
• /
• v.51 no.6
• /
• pp.989-1003
• /
• 2014

In the preliminary design stage of an RC 3D-frame, repeated sequential analyses to determine optimal members' sizes and the investigation of the parameters required to minimize the differential column shortening are computational effort consuming, especially when considering various types of loads such as dead load, temperature action, time dependent effects, construction and live loads. Because the desired accuracy at this stage does not justify such luxury, two backpropagation feedforward artificial neural networks have been proposed in order to approximate this information. Instead of using a commercial software package, many references providing advanced principles have been considered to code a program and generate these neural networks. The first one predicts the typical amount of time between two phases, needed to achieve the minimum maximorum differential column shortening. The other network aims to prognosticate sequential analysis results from those of the simultaneous analysis. After the training stages, testing procedures have been carried out in order to ensure the generalization ability of these respective systems. Numerical cases are studied in order to find out how good these ANN match with the sequential finite element analysis. Comparison reveals an acceptable fit, enabling these systems to be safely used in the preliminary design stage.