• 멤브레인
• /
• 제25권6호
• /
• pp.547-557
• /
• 2015

본 연구에서는 높은 이산화탄소 분리성능을 가지는 폴리이미드의 제조를 위해 2,2-bis(3,4-carboxylphenyl) hexafluoropropane과 두종류의 아민인 2,3,5,6-tetramethyl-1,4-phenylenediamine, Poly(ethylene glycol) bis(3-aminopropyl) terminated을 이용하여 합성을 진행하였다. 합성된 고분자를 비용매 상전이법으로 비대칭 분리막을 제조하기 위하여 고분자의 용해도 지수 추정 값과 비용매 상전이 계수 측정을 통해 용매를 선정하였고, 고분자 용액 점도 측정을 통해 분리막 제조를 위한 도프용액 중의 고분자의 함량을 결정하여 질산리튬을 첨가제로 사용하여 최종적으로 분리막을 제조하였다. 제조된 평판형 비대칭 분리막은 전자주사현미경(SEM)을 통해 질산리튬과 휘발성 용매 함량에 변화에 따른 모폴로지의 변화를 확인하였으며, 이의 변화에 따른 기체 투과도 변화를 확인하였다. 분리막 제조를 위한 도프용액 중의 휘발성 용매 함량이 작을수록 선택도 변화가 없으면서 이산화탄소 투과도가 증가하는 것을 확인하였다.

• 대한산업공학회지
• /
• 제38권2호
• /
• pp.74-79
• /
• 2012

An efficient separation heuristic for the rank-1 Chvatal-Gomory cuts for the binary knapsack problem is proposed. The proposed heuristic is based on the decomposition property of the separation problem for the fixedcharge 0-1 knapsack problem characterized by Park and Lee [14]. Computational tests on the benchmark instances of the generalized assignment problem show that the proposed heuristic procedure can generate strong rank-1 C-G cuts more efficiently than the exact rank-1 C-G cut separation and the exact knapsack facet generation.

• Nuclear Engineering and Technology
• /
• 제29권5호
• /
• pp.361-367
• /
• 1997

The phase separation in ferrite phase of duplex stainless steel is the primary cause of thermal aging embrittlement of the LWR primary pressure boundary components. In this study the phase separation of simulated duplex stainless steel was detected by Mossbauer spectroscopy and magnetic property analysis by VSM(Vibrating Specimen Magnetometer). The simulated duplex stainless steels, Fe-Cr binary, Fe-Cr-Ni ternary, and Fe-Cr-Ni-Si quarternary allots, were aged at 370 and 40$0^{\circ}C$ up to 5,340 hours. It was observed from Mossbauer spectra analysis that internal magnetic field increases with aging time and from VSM that the specific saturation magnetization and Curie temperature increase with aging time. These result are indicative that phase separation into Fe-rich region and Cr-rich region is caused by thermal aging in the temperature range of 370~40$0^{\circ}C$ In cases of specimens containing Ni, the increase of specific saturation magnetization is much higher. This implies that Ni seems to promote Fe-Cr interdiffusion, which accelerates the phase separation into Fe-rich $\alpha$ phase and Cr-rich $\alpha$' phase.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 춘계 총회 및 학술발표회
• /
• pp.136-139
• /
• 2004

The dyeing effluent is a highly colored stream containing unfixed dyes along with salts and auxiliary chemicals such as emulsifying agents. Moreover, Textile dying is a chemically intensive process and consumes large quantities of water. Difficulties in the effluent treatment arise from its non-degradable property by aerobic digestion.(omitted)

• 멤브레인
• /
• 제21권4호
• /
• pp.307-320
• /
• 2011

고분자 기체분리막은 막분리 공정에서도 가장 빠르게 발전하고 있는 분야이다. 고분자 기체 분리막 공정은 심냉법, 가압 기체 흡착법과 견주어 볼 때 경쟁력을 지니고 있다. 기체분리용 고분자 소재로는 폴리술폰, 폴리페닐렌옥사이드, 폴리카보네이트, 폴리이미드 등의 방향족 고분자들이 주로 사용되었다. 현재 이 중에서도 유리상 고분자인 폴리이미드의 경우 높은 투과도와 선택도를 달성하기 위해 많은 연구가 이루어지고 있다. 고분자 소재는 기체분리 성능에 많은 영향을 미치는 요인이기 때문에 기체분리용 고분자 소재와 구조에 대한 올바른 이해가 중요시되고 있다. 본 논문에서는 폴리이미드 제조 및 기체투과 특성에 대한 동향 및 개발 방향에 대해 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2672-2677
• /
• 2007

An investigation of low Reynolds number flow in nozzles and diffusers which are widely used in the valveless micropump is presented. Flow characteristics in the nozzle and diffuser are explained in view of viscous effect and flow oscillation induced by pumping membrane. These calculation results show that the rectification property of valveless micropump is due to a flow separation in the diffuser and the separation is largely originated from the flow oscillation. Under the assumptions of steady flow velocity profile and flow separation in the diffuser, simplified analytical models are provided to see the dependency of rectification on the micropump geometry. Geometric parameters of channel length, nozzle throat, chamber size, and converging/diverging angle are depicted through the analytical models in low Reynolds number flow, and the prediction and experimental results are compared. This theoretical study can be used to determine the optimum geometry of valveless micropump.

• Korean Membrane Journal
• /
• 제7권1호
• /
• pp.51-57
• /
• 2005

Pervaporation with a membrane is one of the economic technologies for separation of liquid mixtures including organic/water mixtures. The ZSM-5 membrane was used fur pervaporation of dichloromethane, 1,2-dichloroethane and trans-1,2-dichloroethylene from their aqueous solutions since its physical property shows very hydrophobic. ZSM-5 crystals were hydrothermally grown and deposited on the inside of a porous sintered stainless steel tube by the secondary growth method. Fluxes of dichlorinated organic compounds were observed to be $50{\~}429\;g/m^2/h$ while separation factors were $15{\~}320$ depending on a mole fraction of a dichlorinated organic compound in a feed solution ranged from 0.0001 to 0.001 mole fraction and the operation temperature between $25^{\circ}C\;and\;35^{\circ}C$.

• Corrosion Science and Technology
• /
• 제13권5호
• /
• pp.170-177
• /
• 2014

Polyurethane coating was designed to give a hydrophobic property on its surface by modifying it with hydroxyl terminated polydimethylsiloxane and then effects of surface hydrophobic tendency, water transport behavior and hence corrosion protectiveness of the modified polyurethane coating were examined using FT-IR/ATR spectroscopy, contact angle measurement and electrochemical impedance test. As results, the surface of polyurethane coating was changed from hydrophilic to hydrophobic property due primarily to a phase separation tendency between polyurethane and modifier by the modification. The phase separation tendency is more appreciable when modified by polydimethylsiloxane with higher content. Water transport behavior of the modified polyurethane coating decreased more in that with higher hydrophobic surface property. The decrease in the impedance modulus ${\mid}Z{\mid}$ at low frequency region in immersion test for polyurethane coatings was associated with the water transport behavior and surface hydrophobic properties of modified polyurethane coatings. The corrosion protectiveness of the modified polyurethane coated carbon steel generally increased with an increase in the modifier content, confirming that corrosion protectiveness of the modified polyurethane coating is well agreed with its water transport behavior.

• 전기전자학회논문지
• /
• 제21권3호
• /
• pp.288-296
• /
• 2017

The enhancement of photoluminescence of Au-$TiO_2$ nanoparticles by surface plasmon resonance has been studied extensively by experiment in recent years. For the purpose of optimizing the photoluminescence property of Au-$TiO_2$ nanoparticles, the manufacturing parameters related to the Au nanoparticles and $TiO_2$ nanoparticles need to be considered. In this paper, Drude model and Maier's effective volume method are used to analyze the variation of the metal nanoparticle radius, separation between metal nanoparticle and dielectric molecule, and total absorption cross-section with original radiative efficiency on the photoluminescence property of Au-$TiO_2$ nanoparticles. The results show that to obtain the optimized enhancement factor for photoluminescence process, the size of Au nanoparticle is about 13 - 20 nm, the separation between Au nanoparticle and $TiO_2$ molecule is about 5 -15 nm, the total absorption cross-section of $TiO_2$ molecules is about $1-100nm^2$ and the original radiative efficiency of $TiO_2$ molecule is weak about 0.001- 0.1. With these fabrication parameters, the photoluminescence property of Au-$TiO_2$ nanoparticles can be enhanced several thousand times compared to traditional $TiO_2$ nanoparticles.

• 한국인쇄학회:학술대회논문집
• /
• 한국인쇄학회 2000년도 춘계 학술발표회 논문집
• /
• pp.56-60
• /
• 2000