• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.62-68
• /
• 1993

During compression molding of fibre-reinforced thermoplastics, the two main problems such as the fibre-matrix separation and the fibre orientation are produced by the flow state. As the molded product tends to be nonhomogeneous and anisotropic due to the separation and the orientation, it is necessary to clarify these in relation to the molding process variables and the fibre structure (fibre entanglement). If the entanglement of fibre structure is strong, the separation increases and the orientation is not easily aligned. Namely, these are inseparably related to each other. The correlation between the separation and the orientation have to be clarified for designing the fibre structure. In this paper, the degree of nonhomogeneity which is a measure of the separation is obtained using one-dimensional rectangular shaped part compression molding. And the orientation function is defined and measured by the image processing using soft X-rayed photograph and image scanner. Correlation between the degree of nonhomogeneity and the orientation function is discussed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.8
• /
• pp.673-679
• /
• 2013

Photogrammetric techniques were used to analyze separation characteristics of store in safe separation flight test. In this analysis, we used single camera method to analyze 6 degrees of freedom of separated store. We established instrumentation requirements based on theoretical background of photogrammetry and guidelines of MIL-HDBK-1763. We applied the photogrammetry to flight test and extracted separation trajectory. We empirically estimated the input variables uncertainties of photogrammetry and its effects on separation trajectory. Using this trajectory which includes the photogrammetric error, we analyzed the safety of separation.

• Korean Chemical Engineering Research
• /
• v.47 no.3
• /
• pp.355-361
• /
• 2009

Effects of operating variables on solid separation rate in two-interconnected fluidized beds system for selective solid circulation have been investigated. Coarse(212~300 or $425{\sim}600{\mu}m$) and fine($63{\sim}106{\mu}m$) particles were separated using the solid separator and the solid separation rate was ranged from 66 to 987 g/min. The solid separation rate increased as the gas velocity through the solid injection nozzle, solid height, diameter of solid injection nozzle, particle size of coarse particles, aperture of the solid separator, and weight fraction of fines in the solid mixture increased. However, the effect of the fluidization velocity was negligible.

• Journal of Families and Better Life
• /
• v.25 no.1 s.85
• /
• pp.183-207
• /
• 2007

The purpose of this study was to improve the understanding of the essential experience of Separated Families in South and North Korea in a socio-cultural context and to explore their post-separation adjustment process from the perspective of the families. Major findings in this study are summarized as follows. First, 'han' was the central phenomenon that the participants experienced following their separation. Second, the core issue in the process of post-separation adjustment was 'accepting the separation and rearrangement of reality for reunion', and over time the participants went through four stages in their adjustment process: the stage of being overwhelmed, the stage of conflict, the stage of awareness, and the stage of acceptance. Third, the main factors affecting the participants' adjustment were supportive systems, available resources(individual variables) and interaction with other separated families. fourth, four types were observed in the typology of adjustment and reunion of the participants.

• Hwankyungkyoyuk
• /
• v.14 no.1
• /
• pp.19-31
• /
• 2001

This study examined the effect of environmental alteration and prompts on recycling behavior. An A-B-BC with a control condition design was employed. Subjects in this study were college students, professors, and employees at a university building. After a baseline phase, environmental alteration was I effect in the next phase and both environmental alteration and prompts were in effect in the final phase for the control condition. The environmental alteration consisted of providing four separation containers for the paper cups, cans recyclable paper, and the disposable on each floor in the building. The prompts consisted of providing the information about the importance of environmental preservation and how to separate the materials in the appropriate containers using an information board and pamphlets. The dependent variables were (1) the number of cans collected in can container, (2) the number of paper cups collected in cup container, (3) the rate of correct separation of cans, (4) the rate of correct separation of paper cups, and (5) the weight of disposable. The rates of correct separations of cans and paper cups were obtained by calculating the percentage of thenumber of recyclable cans and paper cups in the corresponding containers. The results indicated that environmental alteration had positive effects on all the dependent variables. Also, when the prompts were added to the environmental alteration, the incremental effect of the prompts was demonstrated. The implications and limitations of theses findings were discussed and the direction of future studies was also proposed.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.04a
• /
• pp.26-27
• /
• 1995

Most of synthetic polymeric membranes used in ultrafiltration, reverse osmosis and microfiltration processes are prepared by phase inversion(or phase separation) technique. In this technique, a homogeneous polymer solution is cast into thin film or hollow fiber shape and then immersed into a nonsolvent coagulant bath. The exchange of solvent and nonsolvent across the interface between casting solution and coagu!ant can make the casting solution phase-separate and form a membrane with a symmetric or asymmetric structure. Because of importance of this technique in membrane field, many investigations have been dedicated to elucidate the mechanism of membrane formation by phase inversion technique.[1-10] These investigation have suggested that the structure formation and permeation properties of phase inversion membrane depend on the variables such as the nature and content of casting solution and coagulant, temperature of casting solution and coagulant, and the diffusional exchange rate of solvent and nonsolvent etc. which can be related to the thermodynamic and kinetic properties of the casting system. The variables such as the nature and content of casting solution can also be the important factor affecting the structure formation and permeation property of the phase inversion membrane.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.676-685
• /
• 1993

A mathematical model was developed to quantify the separation process of threshed grain-straw mixtures. It was made to predict the separation loss from a separation unit consisted of stationary crimped sieve with rotating inner rotor. Experiments were performed to prove the mathematical model by changing various levels of pertinent variables for rice. Good Agreement between the simulated results and observed data under the various test conditions, such as inclination angle of the separator, vane pitch, rotor speed, MOG/G ratio, feed rate, and crop variety and moisture content, were confirmed.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1998.11a
• /
• pp.97-105
• /
• 1998

The goal of this study is to investigate the potential application of triboelectrostatic separation process for removing unburned carbon from fly ash. The process utilizes the difference in electrical charging characteristics between the organic material (carbon) and the mineral matter (fly ash). In the present work, dry separation tests have been conducted on Samchunpo fly ash samples using a bench - scale analytic separator. The test variables studied include air rate, feed rate, electric field strength, particle size, charger material and length, etc. The best separation results were obtained at the air rate 501/min, feed rate 15 g/min and voltage 15 ㎸. The fly ash with carbon content below 1 % was obtained with over 65% recovery.

• The Korean Journal of Community Living Science
• /
• v.20 no.2
• /
• pp.291-305
• /
• 2009

The purpose of this study was to examine how the career maturity of high school students was affected directly or indirectly by psychological separation from their mothers and through the mediation of self-concept. The subjects in this study were 496 juniors from regular high school in the city of Daegu, who included 243 boys and 253 girls. The measurements of this study were a career-maturity inventory, psychological separation inventory (PSI), and self-concept scale. The major findings of this study were as follows: First, career maturity had significantly positive correlation to conflictual independence from mothers for them. Second, as for the influence of psychological separation, and self-concept on career maturity, three variables, including competence self-concept, home self-concept, attitudinal independence from mothers, classroom self-concept, had significantly explanation of career maturity. Third, as a result of making a path analysis of the impact of psychological separation from mothers on career maturity through the medium of self-concept, conflictual independence gave a direct impact only, and its indirect effect was insignificant. The attitudinal independence showed both direct and indirect influences, for mothers had a significantly indirect impact only.

• Korean Chemical Engineering Research
• /
• v.43 no.3
• /
• pp.380-386
• /
• 2005

Separation of fructose and glucose was performed using emulsion liquid membranes with a mixture of an organoboronic acid and a quaternary ammonium salt as a carrier in a batch reactor. In order to find a carrier and an optimal experimental condition suitable to the sugar separation, extraction of each sugar was carried out independently. The effect of various experimental variables, such as initial concentration of sugar in the feed phase, type of organoboronic acids, and w/o ratio, on the sugar separation was investigated, and the concentrations of sugars in each aqueous phase were analyzed. The ratio of degree of extraction of fructose to that of glucose was very high, but the concentration of fructose in the receiving phase was not too high. Therefore, a stronger stripping agent in the receiving phase was required for development of a practical ELM system suitable to the sugar separation.