• 제목/요약/키워드: separation of copper ion

검색결과 28건 처리시간 0.026초

Influence of counter anions on metal separation and water transport in electrodialysis treating plating wastewater

  • Oh, Eunjoo;Kim, Joohyeong;Ryu, Jun Hee;Min, Kyung Jin;Shin, Hyun-Gon;Park, Ki Young
    • Membrane and Water Treatment
    • /
    • 제11권3호
    • /
    • pp.201-206
    • /
    • 2020
  • Electrodialysis (ED) is used in wastewater treatment, during the processing and recovery of beneficial materials, to produce usable water. In this study, sulfate and chlorine ions, which are the anions majorly used for electroplating, were studied as factors affecting the recovery of copper, nickel and water from wastewater by electrodialysis. Although the removal rates of copper and nickel ions were slightly higher with the use of chlorine ions than of sulfate ions, the removal efficiencies were above 99.9% under all experimental conditions. The metal ions of the plating wastewater flowed through the ion exchange membrane of the diluate tank and the concentrate tank while all the water moved together due to electro-osmosis. The migration of water from the diluate tank to the concentrate tank was higher in the presence of a monovalent chloride ion compared to that of a divalent sulfate ion. When sulfate was the anion used, the recoveries of copper and nickel increased by about 25% and 30%, respectively, as compared to the chloride ion. Therefore, when divalent ions such as sulfate are present in the electrodialysis, it is possible to reduce the movement amount of water and highly concentrate the copper and nickel in the plating wastewater.

나노여과에 의한 중금속 함유 산성 폐에칭액의 재생(II) : 구리이온을 함유한 PCB 폐에칭액의 Dead-end 나노여과 (Recycling of Acidic Etching Waste Solution Containing Heavy Metals by Nanofiltration (II) : Dead-end Nanofiltration of PCB Etching Waste Solution Containing Copper Ion)

  • 남상원;장경선;염경호
    • 멤브레인
    • /
    • 제23권1호
    • /
    • pp.92-99
    • /
    • 2013
  • 본 연구는 인쇄회로기판(PCB) 제조 시 에칭공정에서 발생되는 구리이온($Cu^{+2}$)을 고농도로 함유한 황산 폐에칭액을 NF 막분리법을 사용하여 에칭액 회수와 구리이온 처리를 효율적으로 수행하기 위한 NF 막여과 공정의 운전 조건을 설정하기 위한 기본 자료를 확보하는데 있다. 이를 위해 미국 Koch사의 SelRO MPS-34 4040 NF 막을 대상으로 구리이온을 고농도(5~25 g/L)로 함유한 모의 황산 폐에칭액의 회분식(dead-end) 나노여과 실험을 수행하여 투과 플럭스와 구리이온의 총괄 배제도를 측정하였다. 이 결과 황산용액에의 막 보관기간이 길수록, 황산용액의 pH가 낮을수록 황산에 의한 NF 막의 손상이 더 크게 발생하여 순수 투과 플러스가 증가하였다. 황산 폐에칭액의 투과 플럭스는 황산용액 내 구리이온의 농도가 증가할수록 막 표면에의 구리이온 농축(농도분극)의 증가에 따라 감소하였으며, 구리이온의 배제도는 구리이온의 농도가 높을수록, pH가 낮을수록, 황산용액 내의 막 보관기간이 길수록 낮아져 초기 37%에서 최소 15% 수준으로까지 감소하였다.

이온 크로마토그래피법에 의한 강수 중 철, 구리, 아연의 정량 (Determination of Iron, Copper, and Zinc in Rainwater by Ion Chromatography)

  • 이용근;이계형;이동수
    • 한국대기환경학회지
    • /
    • 제7권2호
    • /
    • pp.137-142
    • /
    • 1991
  • A method is developed for the simultaneous determination of dissolved iron, copper, and zinc in rainwater. The method involves 25-fold evaporative concentration, ion chromatographic separation and subsequent spectrophotometric detection after post-column reaction with 4-(2-pyridylazo) resorcinol. Analytical sensitivities, being defined by the slopes of calibration curves, are 0.93, 0.54, and 0.11 Abs/ $\mu$g/ml for iron, copper, zinc, respectively. Detection limits render around a few tenth of one ng/ml. Precisions evaluated by replicate analysis of real sample are better than 10% RSD. Due to the lack of certified standards for rainwater, the accuracy of the method could not be assessed directly. However, the results of this method agree well with those by inductively coupled plasma mass spectrometry. Analytical results for a suite of Seoul rainwaters are presented herein.

  • PDF

구리이온을 함유한 PCB 폐에칭액의 Cross-flow 나노여과 (Cross-flow Nanofiltration of PCB Etching Waste Solution Containing Copper Ion)

  • 박혜리;남상원;염경호
    • Korean Chemical Engineering Research
    • /
    • 제52권2호
    • /
    • pp.272-277
    • /
    • 2014
  • 본 연구는 인쇄회로기판(PCB) 제조 시 에칭공정에서 발생되는 구리이온($Cu^{+2}$)을 고농도로 함유한 황산 폐에칭액을 NF 막분리법을 사용하여 에칭액 회수와 구리이온 처리를 효율적으로 수행하기 위한 NF 막여과 공정의 운전조건을 설정하기 위한 기본 자료를 확보하는데 있다. 이를 위해 미국 Koch사의 SelRO MPS-34 4040 NF 막을 대상으로 구리이온을 고농도(5~30 g/L)로 함유한 모의 황산 폐에칭액의 cross-flow 나노여과 실험을 수행하여 투과 플럭스와 구리이온의 총괄 배제도를 측정하였다. 이 결과 투과 플럭스는 황산 폐에칭액 내 구리이온의 농도가 증가할수록, 황산 폐에칭액의 pH가 낮을수록 작아졌으며, 그 값은 최소 $4.5L/m^2{\cdot}h$에서 최대 $23L/m^2{\cdot}h$이었다. 황산 폐에칭액 내 구리이온의 총 배제도는 구리이온의 농도가 클수록, 용액의 pH가 낮을수록 그리고 폐에칭액의 순환유량이 작을수록 낮아졌으며, 황산 폐에칭액의 pH가 1 이상인 상태에서 70% 이상의 구리이온 배제가 가능하였다. NF 막을 12개월 동안 황산용액 내에 보관하여도 투과 플러스 와 구리이온 배제도의 유의한 변화가 없어 SelRO MPS-34 막모듈을 강산 조건에서 1년이상 막모듈의 교체 없이 산성 폐에칭액 처리에의 사용이 가능하였다.

계면활성제를 코팅한 알루미나에 부동화한 2-Mercaptobenzimidazol을 이용한 구리이온의 정량 (Determination of Copper Ion with 2-Mercaptobenzimidazol Immobilized on Surfactant-Coated Alumina)

  • Absalan, G.;Goudi, A.Aghaei
    • 대한화학회지
    • /
    • 제51권2호
    • /
    • pp.141-146
    • /
    • 2007
  • 2-mercaptobenzimidazol을 착화제로 사용하여 천연수 중 흔적량의 구리를 분리-예비농축-정량하는 과정을 보고한다. 이 방법은 황산소듐도데실과 γ-알루미나를 물속에서 혼합할 때 γ-알루미나 위에 형성되는 계면활성제 응집체에 기반을 두고 있는데, 2-mercaptobenzimidazol이 산성 매질 속에서 생성된 부가미셀 내부의 소수성 부분으로 들어가 구리 이온의 예비농축과 정량에 적합한 조립체가 된다. 수용액으로부터 μg/ml 수준의 구리이온을 흡착제로 흡착하는 최적 실험조건을 알아내었다. 구리 이온은 pH 7.1-8.0 범위에서 흡착제에 정량적으로 흡착되며 설포살리산을 용리액으로 사용하여 정량적으로 탈착할 수 있다. 용액 중의 다른 이온은 구리 이온의 정량을 방해하지 않았으며, 이 방법을 강물 분석에 적용하니 상대표준편차가 4.91%였다.

$CuCl_2-NiCl_2-CoCl_2$용액으로부터 Alamine336과 LIX84에 의한 구리의 용매추출 (Solvent Extraction of Copper from $CuCl_2-NiCl_2-CoCl_2$ Solutions by Alamine336 and LIX84)

  • 이만승;안종관;안재우
    • 자원리싸이클링
    • /
    • 제11권6호
    • /
    • pp.12-17
    • /
    • 2002
  • $CuCl_2$-$NiCl_2$-$CoCl_2$용액으로부터 구리를 분리하기 위해 추출제로 Alamine336과 LIX84를 사용하여 추출실험을 하였다. 염산용액에서 Alamine336과 LIX84에 의한 구리, 코발트, 니켈의 분배계수와 구리의 분리계수는 금속이온과 염소이온간에 형성되는 착물의 농도에 큰 영향을 받았다. 염소이온농도가 0.5에서 4.0M사이인 용액에서 코발트로부터 구리의 분리성은 LIX84가 Alamine336보다 우수하였다. 염소이온농도가 1.0M인 용액에서 LIX84와 Alamine336의 부피백분율을 5에서 40%까지 변화시켜 추출한 결과 LIX84로 추출하는 경우 Alamine336에 비해 더 높은 구리의 분리계수를 얻었다.

Fabrication of Poly(${\gamma}$-glutamic acid) Monolith by Thermally Induced Phase Separation and Its Application

  • Park, Sung-Bin;Fujimoto, Takashi;Mizohata, Eiichi;Inoue, Tsuyoshi;Sung, Moon-Hee;Uyama, Hiroshi
    • Journal of Microbiology and Biotechnology
    • /
    • 제23권7호
    • /
    • pp.942-952
    • /
    • 2013
  • Monoliths are functional porous materials with a three-dimensional continuous interconnected pore structure in a single piece. A monolith with uniform shape based on poly(${\gamma}$-glutamic acid) (PGA) has been prepared via a thermally induced phase separation technique using a mixture of dimethyl sulfoxide, water, and ethanol as solvent. The morphology of the obtained monolith was observed by scanning electron microscopy and the surface area of the monolith was evaluated by the Brunauer Emmett Teller method. The effects of fabrication parameters such as the concentration and molecular mass of PGA and the solvent composition have been systematically investigated. The PGA monolith was cross-linked with hexamethylene diisocyanate to produce the water-insoluble monolith. The addition of sodium chloride to the phase separation solvent affected the properties of the cross-linked monolith. The swelling ratio of the cross-linked monolith toward aqueous solutions depended on the buffer pH as well as the monolith fabrication condition. Copper(II) ion was efficiently adsorbed on the cross-linked PGA monolith, and the obtained copper-immobilized monolith showed strong antibacterial activity for Escherichia coli. By combination of the characteristic properties of PGA (e.g., high biocompatibility and biodegradability) and the unique features of monoliths (e.g., through-pore structure, large surface area, and high porosity with small pore size), the PGA monolith possesses large potentials for various industrial applications in the biomedical, environmental, analytical, and separation fields.

메조다공성 유기-실리카를 이용한 구리(II)의 예비농축과 불꽃원자 흡수분광법으로의 정량 (Preconcentration of Copper(II) Using Mesoporous Organo-Silicas and Determination by Flame Atomic Absorption Spectrometry)

  • Moghimi, Ali
    • 대한화학회지
    • /
    • 제52권2호
    • /
    • pp.155-163
    • /
    • 2008
  • 유기-실리카 이용한 잔유 구리(II)의 양을 빠른 추출을 위한 간단하고 재현성을 가지는 방법과 불꽃원자 흡수분광법으로의 검출에 대해 연구하였다. 공통으로 존재하는 이온은 분리와 검출에 간섭받지 않았다. 예비농축인자는 100 ml시료 용량에 대해 100 (1 ml 추출용량) 이 였다.제안된 방법의 검출한계는 1.0 ng ml-1이다. 최적조건하에서 흡착제의 최고흡수용량은 5 mg 구리/g 흡착제 였다. 최적조건하에서 상대표준편차는 2.8% (n=10)을 얻었다. 다양한 양의 구리(II)이온은 스파이크한 자연수와 합성수를 시험 시료로 하여 정확도 등을 시험하였다.

${\beta}-Ag_3SI$ 단결정막 전극에 관한 연구 (${\beta}-Ag_3SI$ Single Crystal Membrane Electrode)

  • 신두순;이선천
    • 대한화학회지
    • /
    • 제28권2호
    • /
    • pp.86-94
    • /
    • 1984
  • ${\beta}-Ag_3SI$의 단결정을 만들어 막전극으로의 응용을 살펴보았다. 그 결과 할로겐 이온들에 대해 감응함을 알았고, 분리용액법과 혼합용액법으로 할로겐 이온들에 대한 선택계수를 얻어 이론값과 비교검토 하였으며, 전위시간 곡선으로 부터 이 전극이 유리 전극기구에 의해 전도함을 알았고, 넓은 pH 범위에서 전위가 일정한 값을 가짐을 알았다. 한편 분석화학에의 응용을 살펴 본 결과 할로겐이온의 혼합용액에서 좋은 지시전극으로 사용할 수 있음을 알았다

  • PDF

황산용액에서 용매추출에 의한 코발트(II), 니켈(II) 및 구리(II) 분리 (Separation of Co(II), Ni(II), and Cu(II) from Sulfuric Acid Solution by Solvent Extraction)

  • 문현승;송시정;;이만승
    • 자원리싸이클링
    • /
    • 제31권1호
    • /
    • pp.21-28
    • /
    • 2022
  • 폐리튬이온배터리를 고온에서 용융환원시키면 코발트, 니켈 및 구리 금속합금상을 얻을 수 있다. 이러한 금속합금상으로부터 금속을 분리회수하기 위한 공정을 개발하기 위해 코발트, 니켈 및 구리 금속을 혼합한 금속혼합물을 3% 과산화수소를 함유한 2 M 황산용액으로 침출하면 9.6%의 구리와 함께 코발트와 니켈이 모두 침출된다. 침출용액에서 Cyanex 301로 구리(II)가 선택적으로 추출되었으며, 30% 왕수로 구리(II)를 탈거했다. 구리가 분리된 여액에서 이온성액체인 ALi-SCN으로 Co(II)를 선택적으로 추출했으며, 15%의 암모니아용액으로 3단의 교차식 탈거를 통해 모두 탈거했다. 본 연구를 통해 코발트, 니켈 및 구리 금속혼합물의 황산침출액에서 용매추출로 세 금속을 분리할 수 있는 공정을 제안했다.