• 제목/요약/키워드: separated set

검색결과 320건 처리시간 0.032초

TOPOLOGICAL PRESSURE OF CONTINUOUS FLOWS WITHOUT FIXED POINTS

  • LEE, KYUNG-BOK
    • 대한수학회논문집
    • /
    • 제20권2호
    • /
    • pp.365-379
    • /
    • 2005
  • The purpose of this paper is to correct erroneous proofs of theorems of He, Lu, Wang and Zheng [1] about the topological pressure of continuous flows without fixed points and to give proofs of some results which are stated in the literature without proofs and thereby to show that their theorems are still true.

우오수분리벽을 이용한 합류식 하수관거와 분류식 우수관거의 월류수 제어효과 비교 (Comparison of Pollutant Control in Combined Sewer Overflows and Separated Sewer Overflows using the Separation Wall)

  • 임봉수;김도영;이광춘
    • 한국물환경학회지
    • /
    • 제23권4호
    • /
    • pp.458-466
    • /
    • 2007
  • This study is to evaluate control effects of separation wall by surveying water quality and sewer overflows during dry and wet periods in combined sewer and separated sewer systems. Ravine water from the combined Seokgyo outfall with the separation wall was separated about four times larger than sewage flow during dry periods. The water quality of the combined Seokgyo outfall with separation wall during dry periods is flow weighed average BOD 61 mg/L, the combined Cheonseokgyo outfall without the separation wall is average BOD 71 mg/L, and the separated Pyeongsong center outfall is average BOD 41 mg/L. The BOD concentration in separated outfall form about 57% of the combined outfall, and this means the separated outfall (i.e. storm sewer) is polluted by inflow of sewage. The overflow load of the separated outfall is ten times higher than the combined outfall and its overflow load per rainfall is three times than combined outfall during the wet periods. Therefore, the control plan of overflow load is required in storm sewer. The control effects of the overflow load increased 79% by setting the separation wall in the combined sewer, and showed 27% increase without the separation wall in separated sewer, but forecasted over 80% increase of effects if the separation wall was set.

표준규격 교통신호제어기에서 교통류별 전용신호 구현방안 연구 (A Study on the Signal Control Unit's Reconstitution to Control the Separated Through/Left(or Right) Turn and the Median Bus Lane Signal for the Standard Traffic Signal Controller)

  • 한원섭;이호원;현철승;주두환;이철기
    • 한국ITS학회 논문지
    • /
    • 제8권5호
    • /
    • pp.57-70
    • /
    • 2009
  • 교통여건의 변화로 좌 우회전, 중앙버스 및 자전거 전용신호에 대한 요구가 증대되고 있다. 그러나 현재 운영되고 있는 표준규격 교통신호제어기는 4색등화기를 기반으로 하고 있어, 3색등화기의 방향별 차종별 전용신호를 운영하는 데 제약이 있다. 따라서 본 연구는 기존 표준 교통신호제어기에서 좌 우회전 및 중앙버스의 전용신호를 제어할 수 있는 물리적 소프트웨어적인 방안을 제시하였다. 물리적으로 보행 적, 보행 녹, 적, 황, 화살표 및 녹색등화의 6개 출력단자로 설계된 4색등화기의 신호등구동장치(LSU)를 적, 황, 녹색의 3개 씩 2단 배열로 그룹화 하여, 3색등화기의 전용신호로 사용하는 방안을 제시하였다. 소프트웨어적으로 신호 맵 데이터의 코드값을 3색등화기의 적1 황1 녹1 적2 황2 녹색2의 LSU 출력에 맞게 설정하여, 링별(A/B링) LSU별로 전용신호를 스텝별로 구동하는 방안을 제안하였다. 전용신호 도입 시의 운영효과를 중앙버스전용차로가 운영되고, 좌회전이 허용되는 서울시 망우역교차로를 대상으로 분석한 결과 버스전용차로가 운영되고 있는 주도로(동-서)에서 지체가 크게 개선되어 교차로 전체의 지체시간이 70초/대 이상 개선되는 것으로 분석되었다.

  • PDF

Automatic Individual Tooth Region Separation using Accurate Tooth Curve Detection for Orthodontic Treatment Planning

  • Lee, Chan-woo;Chae, Ok-sam
    • 한국컴퓨터정보학회논문지
    • /
    • 제23권4호
    • /
    • pp.57-64
    • /
    • 2018
  • In this paper, we propose the automatic detection method for individual region separation using panorama image. Finding areas that contain individual teeth is one of the most important tasks in automating 3D models through individual tooth separation. In the conventional method, the maxillary and mandibular teeth regions are separated using a straight line or a specific CT slide, and the tooth regions are separated using a straight line in the vertical direction. In the conventional method, since the teeth are arranged in a curved shape, there is a problem that each tooth region is incorrectly detected in order to generate an accurate tooth region. This is a major obstacle to automating the creation of individual tooth models. In this study, we propose a method to find the correct tooth curve by using the jawbone curve which is very similar to the tooth curve in order to overcome the problem of finding the area containing the existing tooth. We have proposed a new method to accurately set individual tooth regions using the feature that individual teeth are arranged in a direction similar to the normal direction of the tooth alignment curve. In the proposed method, the maxillary and mandibular teeth can be more precisely separated than the conventional method, and the area including the individual teeth can be accurately set. Experiments using real dental CT images demonstrate the superiority of the proposed method.

순환골재 생산 공정상에서 공기유동을 이용한 토분에 포함된 이물질 제거장치에 관한 연구 (Study on the Air-Flow Separator of Light Particles Included in the Clod in the Production Process of Recycling Aggregates)

  • 서용권;허성규;박용기
    • 한국가시화정보학회지
    • /
    • 제4권2호
    • /
    • pp.81-87
    • /
    • 2006
  • In this paper, we present flow patterns around and performance of an air-flow separator by using the numerical analysis. With this separator, particles of different density are to be separated by using the drag force from the air flow. The low-density particles are designed to be separated by using inhalation through holes on a rotating drum. To obtain the flow informations needed for determining the proper design parameters, we have performed numerical simulations by using a commercial code, ANSYS CFX. Various parameter set was tested and it was found that depending on the design of drums there exist critical parameter set regarding the attachment of light particles on the drum, which is prerequisite for the separation of materials. We present here the possibility of using the present design in separation of particles mixed in the clod for use in recycling.

  • PDF

Organizational-Economic Mechanism of the Development of the Agro-Industrial Complex in Modern Conditions

  • Ivanko, Anatolii;Vasylenko, Nataliia;Bushovska, Lesia;Makedon, Halyna;Dvornyk, Inna
    • International Journal of Computer Science & Network Security
    • /
    • 제22권2호
    • /
    • pp.107-114
    • /
    • 2022
  • The main purpose of this study is to substantiate the theoretical and methodological foundations of the organizational and economic mechanism of development of the agro-industrial complex in modern conditions. Organizational and economic mechanism is presented as a complex organizational structure of the system type, which is aimed at performing specific functions, the characteristic feature of which is the constant support of process changes without which the organizational and economic mechanism can not exist. There are four components of the agro-industrial complex, represented by agriculture and the national economy, which ensure its operation, including industry, processing of agricultural products, its storage and transportation, sale and repair and maintenance of agricultural machinery and more. It is proved that the organizational and economic mechanism of development of agro-industrial complex in modern conditions it is expedient to consider: from the point of view of system and process approaches; as a set of economic levers and organizational measures to influence the agro-industrial complex; constituent components of organizational influence on the development of the complex; a set of components, elements that are integrated into the system of economic relations of the subjects of the agro-industrial complex; a set of purposeful stimulators of agro-industrial complex development. The functions of the organizational component of the mechanism of agro-industrial complex include: redistributive, planning, interaction, control, integration and regulatory functions, the functions of the economic component include consumer, investment and innovation, social, incentive, monitoring functions of the mechanism. The symbiosis of the functions of organizational and economic components ensure the effectiveness of the organizational and economic mechanism of the organizational and economic mechanism through its functionalities as a whole.

전자무역기반시설의 구조 분리에 관한 연구 (A Study on Vertical Separation Regarding Paperless Trade Infrastructure)

  • 노재확
    • 통상정보연구
    • /
    • 제8권3호
    • /
    • pp.121-142
    • /
    • 2006
  • Recently regarding the ownership and proper operational forms of paperless trade infrastructure has become an issue. In this research the structural separation approach, different from the behavioral regulation approach, has been adopted. Following the structural separation, the core e-trade infrastructure which is separated from a vertically integrated provider, can be operated by three different forms such as a private sector; a public sector; finally a consortium among participants. As another option, the separated whole infrastructure including both core and non-core can be operated by a independent private entity. However, this option is not interesting case to us. As the last option, it can be considered that a new wholesale independent company for the separated core-infra can be set up for running. Additionally, three other alternative ways such as accounting separation, division separation, or corporation separation with keeping same ownership are also demonstrated. However the cautious investigation on cost and benefits of vertical separation are strongly recommended by OECD and agrees with the conclusion of this study.

  • PDF

Ab initio Electronic Structure Calculations of $O_2$ Using Coupled Cluster Approaches and Many-Body Perturbation Theory

  • Yoon Sup Lee;Sang Yeon Lee
    • Bulletin of the Korean Chemical Society
    • /
    • 제12권2호
    • /
    • pp.211-213
    • /
    • 1991
  • The ground state of the oxygen molecule is calculated by various methods of coupled cluster approaches and many body perturbation theory using a double zeta plus polarization basis set and the UHF reference state. All the methods employed are capable of describing the oxygen molecule near the equilibrium bond length and the separated atom, but do not correctly depict the breaking of the multiple bond. For this basis set, including more correlations does not necessarily improve the agreement with experiment for molecular properties such as bond lengths and dissociation energies.

VCR Drum 조립체의 고정나사 체결 Torque 결정에 관한 연구 (A Study on the determination of the initial torque in tightening set screw of the drum assembly in VCR)

  • 손영갑;김재중;백승준;장석원;유동수
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 춘계학술대회논문집A
    • /
    • pp.333-338
    • /
    • 2000
  • This paper presents an experimental study and numerical thermal deformation analysis in the home appliance, Video Cassette Recorder. Analyzing the change axial force of a set screw according to the change of temperature in the drum assembly, we can determine the initial torque in tightening set screw. The torque will have the preload boss not be separated from the bearing. Also we conduct the fundamental experiment to constitute a boundary condition of the numerical analysis. With the result of this study, we can change the material of preload boss, copper, for aluminum.

  • PDF