• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.207-207
• /
• 2017

The proso millet is vulnerable to lodging due to high plant height and shallow root. A lodging results in a hard mechanical harvesting and yield loss. One of solutions on this problem is inhibition of internode elongation. The objective of this study was to set up use time and dose of prohexadium-calcium, is growth inhibitor. The experimental variety was Ibaekchal. The experiment design was a split-plot design with three replications. The treatments were as follow: Main-plots were 25 and 35 day after sowing(DAS) as use time and sub-plots were 0%, 50%, 100%(diluted solution of 1000 times, $1000{\ell}\;ha^{-1}$), 150% as dose. The amount of nitrogen, phosphate and potassium fertilization were 90, 70, $80kg\;ha^{-1}$, respectively. The size of high ridge and plant spacing were $90{\times}30cm$ and $60{\times}15cm$, respectively. Proso millet was sown on June 9, 2016 by hands and was adjusted at 2 plant per hill. The growth survey of vegetative growth stage was conducted at 1 day before treatment and with one week interval after treatment. Data were collected: (1) grain yield: weight of grain in $kg\;ha^{-1}$, (2) 1000 grain weight: average weight of 1000 grain, (3) plant height: distance from soil to top of panicle or leaf in cm, (4) ear length: distance from top of stem to top of ear in cm, (5) stem diameter: diameter of second internode (6) degree of lodging: percentage of lodging area, etc. Analyses of variance were performed using R version 3.3.1(https://www. r- project. org). The Duncan's multiple range test(DMR) was used to separate treatment means at P < 0.05. There was a significant difference in plant height and number of stem among the use time and dose of prohexadium-calcium during vegetative growth stage. At 25 DAS, the difference with no treatment increased until 25 day after treatment and decreased since then. The difference in number of stem increased until 18 day and decreased since 25 day. At 35 DAS, the difference with no treatment in plant height and number of stem increased until 22 day after treatment and decreased since then. We assumed that the effect of prohexadium-calcium was inhibition of internode elongation and promotion of tillering, continued untel 25day after treatment. At 25 DAS, the degree of lodging deceased to 100%, 30%, 10% and 0% as dose increased. At 35 DAS, the degree of lodging decreased to 100%, 20%, 0% and 0% as dose increased. At 25 DAS, the yield was 2910, 2710, 3190, $2310kg\;ha^{-1}$ among dose. At 35 DAS, the yield was 2750, 2630, 2220, $2050kg\;ha^{-1}$. We recommend that the optimum use time and dose of prohexadium-calcium for proso millet is 1000 times diluted solution of $1000{\ell}$ per ha at 25 day after sowing.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.1
• /
• pp.179-186
• /
• 2009

This works studied to compare gas analyzer with accelerometer and the estimation of energy expenditure based on different attaching position of tri-axial accelerometer such as waist and top of the foot Based on the fact that oxygen intake increases more radically linearly during walking more than 8.0km/hr. 9 male subjects performed walking and running on the treadmill with speed of $1.5{\sim}8.5km$/hr and $4.5{\sim}13.0km$/hr, respectively. Commercially available Nike + iPod Sports kit was used to compare energy expenditure with sensor module attached to their foot. Actual energy expenditure was determined by a continuous direct gas analyzer and two multiple regression equations of walking and running mode for different attaching position were developed. Results showed that estimation accuracy of energy expenditure using waist mounted accelerometer was higher than that of the top of the foot and Nike + iPod Sports kit. Results of energy expenditure based on waist and top of the foot showed that the crossover state of energy expenditure occurred at 7.5km/hr. But Nike + iPod Sports kit could not find intersection of energy expenditure in all nine subjects. Therefore the sensor module attached to the waist and separate multi regression equation by walking and running mode was the best to estimate more accurate prediction.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.3
• /
• pp.269-277
• /
• 2012

Street trees are one of useful urban facilities that reduce carbon dioxide and provide green space in urban areas. They are usually managed by local government, and it is effective to use aerial LIDAR data in order to acquire information such as the location, height and crown width of street tree systematically. In this research, algorithm was proposed that improves the accuracy of extracting top points of street trees and separates the region of individual street trees from aerial LIDAR data. In order to verify the proposed algorithm, a simulated aerial LIDAR data that exactly knows the number, height and crown width of street trees was created. As for the procedure of data processing, filtering that separates ground and non-ground points from LIDAR data was first conducted in order to separate the region of individual street trees. An estimated non-street tree points were then removed from non-ground points, and the top points of street trees were estimated. Region of individual street trees was determined by using the intersecting point of straight line that connects top point and ground point of street tree. Through the experiment by using simulated data, it was possible to refine wrongly estimated points occurred by determining tree tops and to determine the positional information, height, crown width of street trees through the determination of region of street trees.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.2
• /
• pp.115-121
• /
• 2021

This paper used big data and artificial intelligence technology to predict the rapidly increasing internet traffic. There have been various studies on traffic prediction in the past, but they have not been able to reflect the increasing factors that induce huge Internet traffic such as smartphones and streaming in recent years. In addition, event-like factors such as the release of large-capacity popular games or the provision of new contents by OTT (Over the Top) operators are more difficult to predict in advance. Due to these characteristics, it was impossible for an ISP (Internet Service Provider) to reflect real-time service quality management or traffic forecasts in the network business environment with the existing method. Therefore, in this study, in order to solve this problem, an Internet traffic collection system was constructed that searches, discriminates and collects traffic data in real time, separate from the existing NMS. Through this, the flexibility and elasticity to automatically register the data of the collection target are secured, and real-time network quality monitoring is possible. In addition, a large amount of traffic data collected from the system was analyzed by machine learning (AI) to predict future traffic of OTT operators. Through this, more scientific and systematic prediction was possible, and in addition, it was possible to optimize the interworking between ISP operators and to secure the quality of large-scale OTT services.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3491-3496
• /
• 2007

If a molten core is released from a reactor vessel into a reactor cavity during a severe accident, an important safety issue of coolability of the molten core from top-flooding and concrete ablation due to a molten core concrete interaction (MCCI) is still unresolved. The released molten core debris would attack the concrete wall and basemat of the reactor cavity, which will lead to inevitable concrete decompositions and possible radiological releases. In a OECD/MCCI project scheduled for 4 years from 2002. 1 to 2005. 12, a series of tests were performed to secure the data for cooling the molten core spread out at the reactor cavity and for the 2-D long-term core concrete interaction (CCI). The tests included not only separate effect tests such as a melt eruption, water ingression, and crust failure tests with a prototypic material but also 2-D CCI tests with a prototypic material under dry and flooded cavity conditions. The paper deals with the transient simulations on the CCI-2 test by using a severe accident analysis code, CORQUENCH, which was developed at Argonne National Laboratory (ANL). Similar simulations had been already per for me d by using MELCOR 1.8.5 code. Unlike the MELCOR 1.8.5, the CORQUENCH includes a melt eruption mode I and a newly developed water ingression model based on the water ingression tests under the OECD/MCCI project. In order to adjust the geometrical differences between the CCI-2 test (rectangular geometry) and the simulations (cylindrical geometry), the same scaling methodology as used in the MELCOR simulation was applied. For the direct comparison of the simulation results, the same inputs for the MELCOR simulation were used. The simulation results were compared with the previous results by using MELCOR 1.8.5.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.738-742
• /
• 2012

Here, we develop a new nanofilter device for the rapid and efficient separation of nanoparticles and biomolecules, exploiting the use of AAO mebrane with ordered nanopores in the range from 20 nm to 200 nm. Briefly, the chip comprises of a series of the upper and lower PDMS channels containing embedded inlet and outlet ports, and $50{\mu}m$ width microfluidic channel, and AAO membrane to be made the filtering zone. After assembling these components, the acrylate plastic plates were used to fix the device on the top and bottom side. When introducing the samples into the inlet ports of the upper PDMS channel, we were able to separate and concentrate the nanoparticles and target molecules at the filtering zone, and to elute the solutions containing the unwanted materials toward the lower PDMS channels normal to the direction of AAO membrane. To demonstrate the usefulness of the device we apply it to the SERS detection of nucleic acid sequences associated with Dengue virus serotype 2. We report a limit of detection for Dengue sequences of 300 nM and show excellent enhancement of Raman signals from the filter zone of the nanofilter device.

• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.185-191
• /
• 2016

The Hybrid Safety Injection Tank is a passive safety injection system that enables the safety injection water to be injected into the reactor pressure vessel throughout all operating pressures by connecting the top of the SIT and the pressurizer(PZR). In this study, the condition for balancing the pressure between the Hybrid SIT and PZR was derived theoretically. The pressure balancing condition was set at the point where the velocity of the Hybrid SIT coolant injected into the Direct Vessel Injection(DVI) line was at or above zero. If the condition was derived from a pressure network for the Hybrid SIT, pressurizer, and reactor pressure vessel, the pressure difference between the pressurizer and SIT is less than 0.07 MPa.

• Environmental and Resource Economics Review
• /
• v.22 no.4
• /
• pp.691-726
• /
• 2013

We develop a hybrid model which allows the change in electricity generation mix by adding the electricity-sector components of bottom-up model to the conventional CGE model. The electricity sector is represented as a sum of separate generation technologies, each of which has the form of DRTS (Decreasing Returns to Scale) production function, unlike the conventional CGE model. We compare the effects of the 30% emission reduction target using the hybrid model with those using the conventional CGE model. The cost of meeting the target is lower with the hybrid model than the conventional CGE. It is consistent with previous studies in that adding the bottom-up components to the top-down model reduces the cost of emission reduction. In an extra analysis we find that an additional regulation like RPS (Renewable Portfolio Standard) increases the cost.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.1
• /
• pp.39-52
• /
• 2015

This study aims to analyze the characteristics of the male products for urinary incontinence by examining the types and characteristics of those registered in KIPO (Korean Industrial Property Office). Additionally, the types and characteristics, especially for the cloth products and the pads, of male panties for urinary incontinence on the market are analyzed. Men in their 60s with minor symptoms were selected as the subjects to evaluate the wearability. The results are as follows. 11 male products for urinary incontinence, registered in KIPO, are structurally different from those for women by having a separate pocket mainly for absorption. There are one disposable type and 7 cloth types, and the cloth panties can be classified as either united or separable type depending on the detachability of pads from the panties. The types of the panties vary according to the position, shape, and size of the attached pads on normal male panties (boxer, briefs, drawers). The fabrics for the urinary incontinence are usually piled in 3 to 5 layers by having the most absorptive layer on the top, the next with deodorizing characteristics, and the bottom with the waterproof fabric as basics with some additional layers of antibiotic or breathable fabrics. From the wearability test, it has been determined that the panties are not distinguishable in external appearance and the fitness is also not a problem since the size varies as the normal panties. It has been evaluated that the fitness of the panties is an important factor since the pad should be worn in any form; the pad sewed in the middle of the panties was evaluated to be more wearable than having a long pad. In case of separable panties, when the pattern and fabric is similar to the functional panties and the options such as the thickness of the pads or detachability are given to the users, it tends to be more satisfactory.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.8
• /
• pp.1227-1240
• /
• 2009

This study examines the actual conditions of toddler playwear preference survey for design and function. The study develops proper indoor and outdoor playwear for toddlers based on the analysis. A survey of 200 parents with toddlers between 2 and 6 years old and 120 teachers was conducted to find the conditions and needs for playwear along with the necessary design elements. Second, 6 designs including 3 designs for indoor playwear and 3 designs for outdoor playwear were made. These designs emphasized on soil contamination part, color, pattern, form, material, detail, and fasteners. Art play and cooking play are considered for indoor playwear and ways to decrease contamination on sleeve hem, elbow, chest, and knee were determined through the use of yellow, green, and blue colors. Applying a character and separate top with sleeves were determined. Light with breathable and waterproof fabric was determined. The correct amount of Velcro fasteners or buttons was determined for front fastening in addition a pocket was considered necessary as a detail part. The common design for both boys and girls along with a proper design for diverse play were determined. For outdoor playwear, water play, sand play, movement play, and ecology experience are considered and ways to decease contamination on hip, sleeve hem, and knee should be applied to the design as determined through the use of yellow, green, blue, and red colors. The demands for pattern, form, material, and details were similar to indoor playwear. Zipper and buttons for front fastening were determined. These final 6 playwear designs are presented using CAD WALK DESIGNWARE.