• 대한토목학회논문집
• /
• 제26권6D호
• /
• pp.1025-1032
• /
• 2006

고해상도 위성의 센서모형화는 도면화와 지형공간정보(Geo-spatial Information System)의 응용을 위해서는 필수적인 단계이다. 영상과 대상물과의 기하학적인 관계를 규정하는 센서모형은 크게 엄밀(rigorous)센서모형화와 간략(approximate)센서모형화의 두 가지로 나눌 수 있다. 엄밀센서모형화는 위성의 실제적인 촬영기하를 고려한 것으로 센서의 내외부적인 특성을 알고 있어야 하는 반면에 간략센서모형화 방법은 영상취득기하의 종합적인 이해나 센서의 내외부적인 특성정보를 필요로 하지 않기 때문에 사진측량 커뮤니티에서 많은 관심이 증대되고 있다. 본 연구에서는 고해상도 위성영상의 3차원 위치결정에 이용되고 있는 엄밀센서모형과 다양한 간략센서모형에 대해 비교연구를 수행하였으며 위성영상의 이용목적에 따른 적합한 모형화 방법을 제안하였다. IKONOS 위성영상을 이용한 사례연구를 통하여 엄밀센서모형과 간략센서모형에 대한 비교연구를 수행하였으며, 수집 가능한 지상기준점에 따른 위치정확도를 평가하였다. 간략센서모형화 방법 중에서 편의보정된 다항식비례모형(bias compensated RFM)이 가장 우수하였으며 개량평행투영모형(modified parallel projection)과 평행-중심투영모형(parallel-perspective model)은 적은 수의 기준점을 이용하여 센서모형화가 가능하였다. 또한 간략센서모형화 방법 중 부등각사상변환(affine transformation)은 고해상도 위성의 수평위치결정과 영상간의 등록에 활용가능하다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.229.2-229.2
• /
• 2014

Graphene, an allotrope of carbon, is a two-dimensional material having a unique electro-mechanical property that shows significant change of the electrical conductance under the applied strain. In addition of the extraordinary mechanical strength [1], graphene becomes a prospective candidate for pressure sensor technology [2]. However, very few investigations have been carried out to demonstrate characteristics of graphene sensor as a device form. In this study, we demonstrate a pressure sensor using graphene double layer as an active channel to generate electrical signal as the response of the applied vertical pressure. For formation of the active channel in the pressure sensor, two single graphene layers which are grown on Cu foil (25 um thickness) by the plasma enhanced chemical vapor deposition (PECVD) are sequentially transformed to the poly-di-methyl-siloxane (PDMS) substrate. Dry and wet transfer methods are individually employed for formation of the double layer graphene. This sensor geometry results a switching characteristic which shows ~900% conductivity change in response to the application of pulsed pressure of 5 kPa whose on and off duration is 3 sec. Additionally, the functional reliability of the sensor confirms consistent behavior with a 200-cycle test.

• 대한기계학회논문집A
• /
• 제26권8호
• /
• pp.1666-1671
• /
• 2002

A lane sensing algorithm using vision sensors is developed based on lane geometry models. The parameters of the lane geometry models are estimated by a Kalman filter and utilized to reconstruct the lane geometry in the global coordinate. The inverse perspective mapping from image plane to global coordinate assumes earth to be flat, but roll and pitch motions of a vehicle are considered from the perspective of the lane sensing. The proposed algorithm shows robust lane sensing performance compared to the conventional algorithms.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.1043-1046
• /
• 2002

In this paper, drill tests were carried out by modifying drill geometry for burr minimization. Final objective of this study is to develop compatible drill shape for minimization of burr formation. These experimented results with modified drill are measured with laser sensor after performing drilling with variable material. Simultaneously, the cutting force and the torque of various drill geometry have been observed with same cutting condition to judge drill stability. As a result, burr was minimized in step drill with 75$^{\circ}$ step angle at every material.

• 한국음향학회지
• /
• 제14권1호
• /
• pp.115-122
• /
• 1995

균일한 소자 (안테나 또는 감지기) 간격으로 계수치를 체감하는 것보다 균일한 계수치로 소자의 간격을 체감하는 것이 실용적이며, 직사각형 어레이에서는, 삼각형 격자 구조가 직사각형 격자구조 보다 소자 수를 줄이는데 더 경제적이다. 접지판 위에 설치된 삼각형 격자 구조를 가진 직사각형 위상어레이의 성능을 향상시키기 위하여 소자간격 체감 방법을 제안하였다. 소자간격 체감이 주빔(main beam)의 폭과 측면로브(sidelobe)의 높이에 미치는 영향을 논의하였다. 제안된 방법을 사용한 결과 측면로브의 성능이 향상되었으나 주빔폭은 약간 넓어지는 것이 밝혀졌다.

• 제어로봇시스템학회논문지
• /
• 제7권8호
• /
• pp.656-663
• /
• 2001

This paper presents a sensor fusion method to recognize a cylindrical object a CCD camera, a laser slit beam and ultrasonic sensors on a pan/tilt device. For object recognition with a vision sensor, an active light source projects a stripe pattern of light on the object surface. The 2D image data are transformed into 3D data using the geometry between the camera and the laser slit beam. The ultrasonic sensor uses an ultrasonic transducer array mounted in horizontal direction on the pan/tilt device. The time of flight is estimated by finding the maximum correlation between the received ultrasonic pulse and a set of stored templates - also called a matched filter. The distance of flight is calculated by simply multiplying the time of flight by the speed of sound and the maximum amplitude of the filtered signal is used to determine the face angle to the object. To determine the position and the radius of cylindrical objects, we use a statistical sensor fusion. Experimental results show that the fused data increase the reliability for the object recognition.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.680-684
• /
• 1996

Welding systems cannot adapt to changes in the joint geometry which may occur due to a variety of reason. Automatic seam tracking technigue is essential to adjust the welding torch position in real time as it moves along the seam. Automatic tracking system must keep the welding speed constant unrelation to the change of the welding path. Therefore, the information from the laser displacement sensor must be converted into the input to operate the X-Y table and to rotate the desired torch position by proposed algorithm. In this research, laser displacement sensor is used as a seam finder in the automatic tracking system. X-Y moving table manipulated by ac servo motor controls the position and velocity of the torch-and-sensor part. DC motor controls the position and velocity of the torch. X-Y table controls the position of sensor and relative position of torch is controlled by dc motor which is mounted at sensor-and-torch part. Sensor is always ahead of torch to preview the weld line. From the experimental results, we could see the possiblity that the laser displacement sensor can be used as a seam finder in welding process and that the seam tracking system controlled by proposed algorithm is well done.

• 한국공작기계학회논문집
• /
• 제17권1호
• /
• pp.98-105
• /
• 2008

In this paper, the system for monitoring process of aluminum laser welding was developed using the light signal emitted from the plasma which comes from interaction between material and laser. Photodiode for monitoring system was selected based on the spectrum analysis of light from plasma and keyhole. Behavior of plasma and keyhole was analyzed through the sensor signals. Value of sensor signal represented the light intensity and fluctuation of signal indicated the stability of plasma and keyhole. For the relation between welding condition and sensor signals, the input power and weld geometry greatly effected on the average of each sensor signals. Using the feature values of signals, estimation model for tensile strength of weld was formulated with neural network algorithm. Performance of this model was verified through coefficient of determination and average error rate.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.390-393
• /
• 2007

KOMPSAT-2, the first Korean high resolution earth observing satellite, continuously acquires high resolution images since July 2006. The quality of satellite images should be geometrically and radiometrically ensured before distribution to users. This study focused on absolute radiometric calibration which is a prerequisite procedure to ensure the radiometric quality of optical satellite images. In this study, we performed reflectance-based vicarious calibration methods on several uniform targets collected through several field campaigns in 2007. The radiative transfer model, MODTRAN, was used to estimate the amount of energy received at the sensor. The energy reached at the sensor are affected by several factors such as reflectance of targets, atmospheric condition, geometry condition between Sun and the sensor, etc. This study proposes the absolute radiometric calibration coefficients of KOMPSAT-2 MSC images combining several types of collected data through field works and tried to compare dynamic range of sensor-detected energy with other commercial high resolution sensors.

• Journal of Welding and Joining
• /
• 제19권2호
• /
• pp.200-207
• /
• 2001

Three-diemnsional bead profile was measured using the biprism stereo vision sensor in GMAW, which consists of an optical filter, biprism and CCD camera. Since single CCD camera is used, this system has various advantages over the conventional stereo vision system using two cameras such as finding the corresponding points along the horizontal scanline. In this wort, the biprism stereo vision sensor was designed for the GMAW, and the linear calibration method was proposed to determine the prism and camera parameters. Image processing techniques were employed to find the corresponding point along the pool boundary. The ism-intensity contour corresponding to the pool boundary was found in the pixel order and the filter-based matching algorithm was used to refine the corresponding points in the subpixel order. Predicted bead dimensions were in broad agreements with the measured results under the conditions of spray mode and humping bead.