• Investigative Magnetic Resonance Imaging
• /
• v.1 no.1
• /
• pp.66-74
• /
• 1997

fMRI, functional MRI introduced receently appears based on the gradient echo technique which is sensitive to the field inhomogeneity developed due to the local susceptibility changes of blood oxygenation and deoxygenation. There has been many variants of the basic gradient echo sequence which is sensitive to the local inhomogeniety, among others such as GRASS or SSFP to EPISTAR are the most commonly used gradient echo techniques. Common to all these gradient echo techniques is that the signal due to the susceptibility effects is generally decreased with increasing inhomogeneity due to the $T2^{*}$ effect or conventionally konwn as blood oxygenation level dependent(BOLD) effect. It is, also found that the BOLD sensitivity is also dependent on the imaging modes, namely whether the imaging is in axial, or coronal or sagittal mode as well as the directions of the vessels against the main magnetic field. We have, therefore, launched a systematic study of imaging mode dependent signal change or BOLD sensitivity as well as the signal changes due tothe tilting angle of the imaging planes. Study has been made for both TRFGE sequence and CGE sequence to compare the distinctions of the each mode since each technique has different sensitivity againsst susceptibility effect. Method of computation and both the computer simulations and their corresponding experimental results are presented.

• Journal of the Korea Convergence Society
• /
• v.10 no.3
• /
• pp.73-79
• /
• 2019

This study simulated external ear canal modeling with different external ear canal lengths, vertical flexion angles, and inner/outer diameter ratios using digital imaging and communications in medicine(DICOM) of the head temporal region and measured the acoustic sensitivity. The experiment was performed by increasing the audible frequency for humans by 200 Hz and expressing the frequency constantly transmitted at 1 Pa as the eardrum acoustic volume and presented the measurements by linear and quadratic curve regression analysis. The results showed that the longer the external ear canal length and the higher the ratio of the outer/inner diameter, the faster the acoustic response at lower frequencies. The acoustic sensitivity correlation of the meta-model using regression analysis showed a 77% influence by the external ear canal length and 5% by the external/internal diameter ratio, while the vertical flexion angle did not show a significant relationship. This showed that auditory acoustic sensitivity of humans is a factor that reacts faster at a low frequency when the external ear canal length is longer and when the difference between the outer and inner diameter is higher.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.7
• /
• pp.767-776
• /
• 2020

Due to the recent climate change caused by global warming, weather changes in a different pattern from the past have occurred, and the increase in seawater temperature has led to an increase in the size and intensity of typhoons. Accordingly, there is an increasing need for bitts that can be used to secure mooring safety of the ship when a sudden gust occurs. Based on 12 scenarios of a mooring safety evaluation program, this study analyzed the criteria for arranging bollard and bitt, and analyzed the sensitivity of mooring safety when using storm bitts. As a result of the evaluation, it was analyzed that the mooring factor value decreased compared to the general mooring line arrangement when the fore and stern breastline were added to the bitts for gusts. The results of this study can be used as basic data for proposing storm bitts arrangements for gusts in consideration of the characteristics of berth ships and ports. From the perspective of ship operators, storm bitts at the pier will be an effective method for securing the ship's mooring safety in case of a gust of wind.

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.161-167
• /
• 2007

The objetives of this study are to set up optimum extraction temperature, time and organic solvent for propolis extraction, to investigate chemical properties, and to develop health foods from propolis preparation. In this study, ethanol and ultrasonic extracts method performed to optimum extraction temperature was at 60, $20^{\circ}C$, optimum extraction time was at 12, 4 hours and optimum extraction amount of solvent was at 20, 15 times of propolis weight. When various ethanol solutions were used, whereas flavonoid content was highest in 70, 80% aqueous ethanol, respectively. So the ultrasonic extracts method used gave better results than the ethanol extracts method in this work. Extraction of propolis with etanol and ultrasonic extracts method was performed by using the water and various concentrations of aqueous ethanol as solvent. Sensitivity of propolis samples to Staphylococcus aureus was investigated and the results were shown. Samples of water extract did not inhibit microbial growth, where as 50% aqueous ethanol extract the largest inhibitory zone for Staphylococcus aureus, then decreased inhibition with increasing ethanol concentrations.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.1
• /
• pp.50-59
• /
• 2014

In this paper, we develop an efficient approach to solve a multiple-item budget-constraint newsboy problem with a reservation policy. A conventional approach for solving such problem utilizes an approximation for the evaluation of an inverse of a Gaussian cumulative density function when the argument of the function is small, and a heuristic method for finding an optimal Lagrangian multiplier. In contrast to the conventional approach, this paper proposes more accurate method of evaluating the function by using the normalization and an effective numerical integration method. We also propose an efficient way to find an optimal Lagrangian multiplier by proving that the equation for the budget-constraint is in fact a monotonically increasing function in the Lagrangian multiplier. Numerical examples are tested to show the performance of the proposed approach with emphases on the behaviors of the inverse of a Gaussian cumulative density function and the Lagrangian multiplier. By using sensitivity analysis of different budget constraints, we show that the reservation policy indeed provides greater expected profit than the classical model of not having the reservation policy.

• Journal of Radiation Industry
• /
• v.17 no.4
• /
• pp.471-479
• /
• 2023

In In-situ radioactivity measurement techniques, efficiency calibration models use predefined models to simulate a sample's geometry and radioactivity distribution. However, simplified efficiency calibration models lead to uncertainties in the efficiency curves, which in turn affect the radioactivity concentration results. This study aims to develop an efficiency calibration optimization methodology to improve the accuracy of in-situ gamma radiation measurements for byproducts from industrial facilities. To accomplish the objective, a drive mechanism for rotational measurement of an byproduct simulator and a sample was constructed. Using ISOCS, an efficiency calibration model of the designed object was generated. Then, the sensitivity analysis of the efficiency calibration model was performed, and the efficiency curve of the efficiency calibration model was optimized using the sensitivity analysis results. Finally, the radiation concentration of the simulated subject was estimated, compared, and evaluated with the designed certification value. For the sensitivity assessment of the influencing factors of the efficiency calibration model, the ISOCS Uncertainty Estimator was used for the horizontal and vertical size and density of the measured object. The standard deviation of the measurement efficiency as a function of the longitudinal size and density of the efficiency calibration model decreased with increasing energy region. When using the optimized efficiency calibration model, the measurement efficiency using IUE was improved compared to the measurement efficiency using ISOCS at the energy of ²²⁸Ac (911 keV) for the nuclide under analysis. Using the ISOCS efficiency calibration method, the difference between the measured radiation concentration and the design value for each simulated subject measurement direction was 4.1% (1% to 10%) on average. The difference between the estimated radioactivity concentration and the design value was 3.6% (1~8%) on average when using the ISOCS IUE efficiency calibration method, which was closer to the design value than the efficiency calibration method using ISOCS. In other words, the estimated radioactivity concentration using the optimized efficiency curve was similar to the designed radioactivity concentration. The results of this study can be utilized as the main basis for the development of regulatory technologies for the treatment and disposal of waste generated during the operation, maintenance, and facility replacement of domestic byproduct generation facilities.

• Korean Management Science Review
• /
• v.18 no.1
• /
• pp.55-68
• /
• 2001

A virtual shopping mall is like a real-world mall, supports electronic shopping by selling products or services through Interne. Although increasing numbers of products are being marketed on the Web, little efforts has been spent on evaluating what mall is more suitable for marketing electronically and for protecting consumers. Evaluation of virtual shopping malls is regarded as a major task in business-to-consumer electronic commerce. This paper considers the Analytic Hierarchy Process(AHP) method in the evaluation of virtual shopping malls and provides its applications. The AHP is a systematic procedure for representing the elements of any problem, hierarchically. A series of pairwise comparison judgments is performed to express the relative strength or intensity of impact of the elements in the hierarchy. The AHP model hierarchy consists of the four following levels: decision maker, main criteria, sub-criteria, and virtual shopping malls. the main criteria include the state of physical firms, representation of information on the virtual shopping malls, product or service, convenience for shopping, consumer protection, and consumer service. The total number of sub-criteria in the third level is twenty-nine. All decision makers selected belong to virtual shopping mall enterprises, or universities. As a case study, we show the synthesized priority of the five virtual shopping malls that have acquired an E-Trust mark. Finally a sensitivity analysis shows how well each virtual shopping mall performs on each criterion by increasing or decreasing the importance of the main criteria.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.1
• /
• pp.1-9
• /
• 2015

This paper presents a design method for optimizing the focused beam characteristics, which are mainly determined by the condenser lenses in a scanning electron microscopy (SEM) design. Sharply reducing the probe diameter of electron beams by focusing the condenser lens (i.e., the rate of condensation) is important because a small probe diameter results in high-performance demagnification. This study explored design parameters that contribute to increasing the SEM resolution efficiently using lens analysis and the ray tracing method. A sensitivity analysis was conducted based on those results to compare the effects of these parameters on beam focusing. The results of this analysis on the design parameters for the beam characteristics can be employed as basic key information for designing a column in SEM.

• Korean Journal of Environmental Agriculture
• /
• v.14 no.1
• /
• pp.45-54
• /
• 1995

esters of the acid analytes were synthesized using $H_2SO_4$ as the catalyst. Efficiency of derivatization and instrumental molecular-response were compared with herbicides methylated with $BF_3-methanol$(14% W/V), $H_2SO_4-methanol$(33% V/V), and diazomethane. The molecular integrity of TFE-2,4-D, TFE-dicamba, and TFE-mecoprop, in the mixture, was confirmed by the GC/MSD method. The TFE-Esterification efficiency was maximized by adjusting the volume of $H_2SO_4$ the reaction time, and temperature. Optimal efficiency for the herbicide mixture was obtained by adding 1 ml of $H_2SO_4$ and 1 ml of TFE to the dried sample and allowing the reaction to proceed at $22^{\circ}C$ for 8 hr or using 0.5 ml $H_2SO_4$ and 1 ml of TFE at $60^{\circ}C$. For 120 min increasing the temperature and decreasing the reaction time were required for maximum esterification efficiency. The sensitivity of the GC/ECD to the TFE esters was about $2{\sim}20$ times greater than that to the methyl ester derivatives. The herbicides were extracted and esterified to TFE derivatives simultaneously from soil leachates previously spiked with the analytes. Herbicide recovery, peak resolution, and detector sensitivity were excellent without using column cleanup procedures.

• Korean Journal of Materials Research
• /
• v.21 no.9
• /
• pp.486-490
• /
• 2011

Nano-indium-coated ZnO:In thick films were prepared by a hydrothermal method. ZnO:In gas sensors were fabricated by a screen printing method on alumina substrates. The gas sensing properties of the gas sensors were investigated for hydrocarbon gas. The effects of the indium concentration of the ZnO:In gas sensors on the structural and morphological properties were investigated by X-ray diffraction and scanning electron microscopy. XRD patterns revealed that the ZnO:In with wurtzite structure was grown with (1 0 0), (0 0 2), and (1 0 1) peaks. The quantity of In coating on the ZnO surface increased with increasing In concentration. The sensitivity of the ZnO:In sensors was measured for 5 ppm $CH_4$ gas and $CH_3CH_2CH_3$ gas at room temperature by comparing the resistance in air with that in target gases. The highest sensitivity to $CH_4$ gas and $CH_3CH_2CH_3$ gas of the ZnO:In sensors was observed at the In 6 wt%. The response and recovery times of the 6 wt% indiumcoated ZnO:In gas sensors were 19 s and 12 s, respectively.