• 한국멀티미디어학회논문지
• /
• 제12권3호
• /
• pp.460-471
• /
• 2009

본 연구는 웹이라는 환경에서의 감성에 대해 연구하고자 하였다. 즉, 이는 웹에서의 사용자 감성에 대한 객관적인 기준을 제시하고자 한 것이다. 본 연구는 크게 두 가지의 연구 주제를 가지며, 그 내용은 다음과 같다. 첫째, 웹에서 웹사이트가 가지고 있는 감성요인을 분석, 이를 바탕으로 한 감성구조모형을 개발하고자 하였다. 둘째, 위 연구를 바탕으로 웹 디자인에서의 감성요인과 조형요소간의 상관관계를 알아보고자 하였다. 감성요소와 조형요소간의 상관관계를 밝힘으로서, 웹 디자인에서의 성공적인 감성디자인을 구현하고자 하였다. 이는 감성을 위한 다양한 접근방식 중 하나를 제시하고자 한 것이며, 결국 이러한 연구는 감성적 디자인의 객관적 기준을 마련하는 과장이라 할 수 있다. 디자이너가 감성적 디자인을 함에 있어서 제작과 평가에 보다 이성적인 가이드라인을 제시, 성공적인 감성디자인 구현에 도움이 될 것으로 기대된다.

• 한국광학회지
• /
• 제32권6호
• /
• pp.259-265
• /
• 2021

최근 렌즈 가공 및 측정 기술의 발전에 따라 렌즈의 제작 조립 기술이 개선되었다. 그럼에도 불구하고 렌즈 제작 조립 기술의 상향에 따른 비용 및 제작 기간의 증가, 온도 및 진동 등의 사용 환경 의존도를 해결하지 못해 이에 따른 불안정해지는 성능 등을 극복하지 못하였다. 또한, 초정밀 광학계에서 효과적으로 민감도를 줄이는 방법은 다수의 보상자를 이용하는 방법인데, 특히 내시경 같은 초소형 렌즈의 경우 렌즈 경통 크기 제약으로 인하여 상거리 보상자 이외 추가적인 보상자 사용에 어려움이 있다. 따라서 렌즈 설계에 있어 공차에 대한 렌즈의 민감도를 최소화하는 것은 무엇보다도 중요한 기술인 바 이를 위한 노력이 필요하며, 렌즈 설계 소프트웨어에서도 민감도를 줄일 수 있는 기능들이 추가되는 추세이다. 본 논문에서는 우선 성능이 최적화된 설계를 도출하고, 이 설계의 민감도를 분석하여 민감도가 높은 요소들을 다중 구성(multi-configuration)에 적용한 뒤 다시 최적화함으로써 렌즈 민감도를 최소화하였으며 사례를 들어 다중 구성 방법이 민감도 저감에 매우 효과적임을 보여주었다.

• 대한의용생체공학회:의공학회지
• /
• 제30권2호
• /
• pp.122-128
• /
• 2009

Cancer serum biomarkers have advanced our ability to more accurately predict tumor classification, prognostic/metastatic potential, and response potential to novel chemotherapies. Serum amyloid A (SAA) and Vascular endothelial growth factor (VEGF) have potential utility as a serum biomarker for lung cancer. Quantum dots, nanometer-sized crystals, have a high quantum yield, sensitivity, and pronounced photostability. The properties of quantum dots can be efficiently applied to the detection of serum biomarkers in immunoassays as fluorescent probe. We used quantum dots as fluorescent probes in immunoassays and attempted to detect serum amyloid A and vascular endothelial growth factor as serum biomarkers of lung cancer. This fluorescence immunoassay based on the properties of quantum dots is applicable to the detection of serum biomarkers for lung cancer. The fluorescence immunoassay with quantum dots should allow the efficient and specific detection of serum amyloid A (SAA) for the possible diagnosis of lung cancer.

• Smart Structures and Systems
• /
• 제16권2호
• /
• pp.367-382
• /
• 2015

This paper aims to conduct the reliability-based assessment of the welded joint in the orthotropic steel bridge deck by use of a mesh-insensitive structural stress (MISS) method, which is an effective numerical procedure to determine the reliable stress distribution adjacent to the weld toe. Both the solid element model and the shell element model are first established to investigate the sensitivity of the element size and the element type in calculating the structural stress under different loading scenarios. In order to achieve realistic condition assessment of the welded joint, the probabilistic approach based on the structural reliability theory is adopted to derive the reliability index and the failure probability by taking into account the uncertainties inherent in the material properties and load conditions. The limit state function is formulated in terms of the structural resistance of the material and the load effect which is described by the structural stress obtained by the MISS method. The reliability index is computed by use of the first-order reliability method (FORM), and compared with a target reliability index to facilitate the safety assessment. The results achieved from this study reveal that the calculation of the structural stress using the MISS method is insensitive to the element size and the element type, and the obtained structural stress results serve as a reliable basis for structural reliability analysis.

• Journal of Welding and Joining
• /
• 제32권1호
• /
• pp.61-65
• /
• 2014

The purpose of this study is to evaluate the applicability of the element stress to establish S-N design curve for the welded lap joint with thin plates below 2mm thickness. In order to do it, the extensive fatigue tests of the welded lap joints with INVAR alloy were performed. With the results, the deign S-N curves for the lap-weld were established by using the reference stresses such as the nominal stress range at the weld throat area, hot spot stress range and element stress range, and compared with regard to the standard deviation. The standard deviation of S-N curves with element stress range was less than that of S-N curves with other reference stresses. In addition, FEA results show the amount of the element stress is less sensitive to mesh size. Based on the results, it can be concluded that the element stress is to be used as the reference stress for the design S-N curves of the welded lap joint.

• 한국해양공학회지
• /
• 제29권1호
• /
• pp.45-55
• /
• 2015

Because of the high stress concentration near the toe of a welded joint, the calculation of local stress using the finite element method which is relevant to the fatigue strength of the weld toe crack, is a challenging task. This is mainly caused by the sensitivity of finite element analysis, which usually occurs near the area of a dramatically changing stress field. This paper presents a novel numerical method through which a less mesh-sensitive local stress calculation can be achieved based on the 3D solid finite element, strictly sticking to the original definition of hot spot stress. In order to achieve the goal, a traction stress, defined at 0.5t and 1.5t away from the weld toe, was calculated using either a force-equivalent or work-equivalent approach, both of which are based on the internal nodal forces on the imaginary cut planes. In the force-equivalent approach, the traction stress on the imaginary cut plane was calculated using the simple force and moment equilibrium, whereas the equivalence of the work done by both the nodal forces and linearized traction stress was employed in the work-equivalent approach. In order to confirm the validity of the proposed method, five typical welded joints widely used in ships and offshore structures were analyzed using five different solid element types and four different mesh sizes. Finally, the performance of the proposed method was compared with that of the traditionally used surface stress extrapolation method. It turned out that the sensitivity of the hot spot stress for the analyzed typical welded joints obtained from the proposed method outperformed the traditional extrapolation method by far.

• 대한토목학회논문집
• /
• 제35권4호
• /
• pp.853-861
• /
• 2015

본 연구에서는 수치해석을 이용한 piled raft 기초의 복합적인 거동평가를 위해 축대칭 조건 및 경계면 요소를 적용한 유한차분해석 모델링 방법이 합리적인지 검증하였다. 이를 위해 실내모형실험 결과와 수치해석 결과를 비교 분석하여 piled raft 기초의 모델링 방법의 적합성을 평가하였다. 그리고 실제 현장조건을 고려한 기초 매개변수에 대한 민감도분석을 수행하여 raft의 하중분담율을 분석하였다. 연구 결과, 실내모형실험과 수치해석 결과에서 지지력-수직변위의 상관관계가 동일한 경향을 보였으며, piled raft 기초의 극한지지력과 raft의 하중분담율이 비교적 유사하게 산정되었다. 그리고 민감도분석을 통해 raft의 하중분담율은 약 33%~52% 사이에서 산정되어, 기존 연구 결과와 유사함을 확인하였다. 따라서 piled raft 기초는 축대칭 조건 및 경계면 요소를 이용하여 효과적으로 모델링될 수 있을 것으로 판단된다.

• 한국수산과학회지
• /
• 제44권4호
• /
• pp.413-422
• /
• 2011

An improved split-beam transducer for a 50 kHz fish-sizing echo sounder was developed. The main objective of this study was to minimize the side lobe level in the beam pattern and the distance between acoustic centers for adjacent transducer quadrants in the geometrical arrangement of array elements while maintaining a given number of transducer elements and beam width. To achieve these goals, a 32-element planar array transducer ($6{\times}6$ array with one element in each corner missing) was designed using the Dolph-Chebyshev shading function to suppress side lobes in the array beam pattern and fabricated by arranging the inter-element spacing to be substantially equal to half the wavelength using the transducer element of 0.4 times the wavelength in diameter. The performance characteristics of this split-beam transducer were evaluated in the experimental water tank of $5m{\times}5m{\times}6m$ (length${\times}$height${\times}$width). In this study, the design goal of the beam width and side lobe level for transmitting a beam pattern was initially set at $21^{\circ}$ and -30 dB, respectively. However, the measured beam width at 3 dB was $21^{\circ}$ in both directions with side lobe levels of -24.7 dB in the horizontal plane and -25.6 dB in the vertical plane. The averaged beam width at -3 dB of the receiving beam patterns for four receiving quadrants was $31.4^{\circ}$. The transmitting voltage response was 161.5 dB (re $1{\mu}Pa$/V at 1 m) at 50.23 kHz with a bandwidth of 2.16 kHz, and the averaged receiving sensitivity for four receiving quadrants was -178.13 dB (re 1 V/${\mu}Pa$) at 49.8 kHz with a bandwidth of 2.64 kHz.

• 한국실내디자인학회논문집
• /
• 제25권2호
• /
• pp.41-49
• /
• 2016

The purpose of this study is to analyze the change and to compare to the difference of 'selective elements' and 'space-memory' focusing on the theory, 'selective attention' through the survey results. In this study, In this study, the lighting is considered a important factor in the change of 'selective elements'. this survey is to find the selective elements of participants and to measure the spatial sensitivity of respondents through 'self- test'. The analysis in this study is conducted by descriptive statistics, t-test and one way ANOVA by SPSS program 22. The results of this study are as following; Firstly, 'attention-element' could be classified with 4 types, 'shape', 'material', 'contrast' and 'combination'. 'shape' could divide into 'structure' and' furniture and object'. In case of 'material', it could section with 'pattern' and 'color'. Secondly, through the results of study, 'attention-element' is different each space during the day in detail. But we could know that 'shape' is the important element of the 'attention-elements' during the day through comparison of this result. That means users consider this as a important factor when they evaluate the space. Therefore, it is effective way designers to consider 'shape' as the first element when they want to conduct the special sensitivity of users in the space through planning. On the other hand, what selective elements of users are different by the lighting situation should be acknowledged by designers. And they should think the kinds of selective elements are more various when lighting turns on than turns off.. Thirdly, through the results such as the meaningful difference of space-memory of users according to the change of 'attention-elements', designers should judge about which kind of feeling of users to the space do you want lead in the design process. For the effective feedback between spaces and users to induce the same emotion of users, designers need to consider the unified design and the individual design both. Also, we will regard the differences in the users' emotion to the space according to the lighting situation when we design the space.

• Structural Engineering and Mechanics
• /
• 제52권6호
• /
• pp.1099-1120
• /
• 2014

In this paper, reliability-based design optimization (RBDO) of structures is addressed. For this purpose, the global search and optimization capabilities of genetic algorithm (GA) are combined with the efficiency and reasonable accuracy of an advanced moment-based finite element reliability method. For performing RBDO, three variants of GA including a real-coded, a binary-coded and an improved binary-coded GA are developed. In these methods, GA performs (finite element) reliability analyses to evaluate reliability constraints. For truss structures which include finite element modeling, reliability constraints are evaluated using finite element reliability analysis. Response sensitivity required for finite element reliability analysis is obtained by direct differentiation method (DDM) rather than finite difference method (FDM). The proposed methods are examined within four standard test examples and real-world design problems. The results illustrate the superiority and efficiency of the improved binary-coded GA. Results also illustrate that DDM significantly reduces the computational cost and improves the efficiency of the optimization procedure.