• 한국지반공학회논문집
• /
• 제26권1호
• /
• pp.21-33
• /
• 2010

본 논문에서는 송도지반의 압밀 및 투수특성을 현장 및 실내시험을 이용하여 평가하였다. 송도지반의 압밀층은 약 E.L-15m 상부에 분포하는 실트질 점토층이며, 압밀층 사이에 배수층 역할을 할 것으로 판단되는 모래층이 분포하는 것으로 분석되었다. 압밀층 상부는 매립 전에는 과압밀 상태였으나 매립 후에는 정규압밀 또는 약간 과압밀된 상태로 전이된 것으로 분석되었다. 압밀 및 투수특성은 점토, 실트질 점토, 점토질 실트 등의 흙의 종류에 따라서 큰 차이를 보이는 것으로 나타났으며, 본 논문에서는 각 지층에 대한 압밀 및 투수특성 값의 평균 및 범위, 이방성 분석결과를 제시하였다. 본 논문의 압밀 및 투수특성에 관한 연구결과는 송도지역의 초기 지반설계자료로 사용될 수 있을 것으로 판단된다.

• Geomechanics and Engineering
• /
• 제34권2호
• /
• pp.115-124
• /
• 2023

By conducting three-dimensional simulation with consideration of small-strain characteristics of soil stiffness, the effects of excavation geometry and tunnel cover to diameter ratio on deformation mechanisms of an existing tunnel located either at a side of basement or directly underneath the basement were systematically studied. Field measurements were used to verify the numerical model and model parameters. For basement excavated at a side of an existing tunnel, the maximum settlement and horizontal displacement of the tunnel are always observed at the tunnel springline closer to basement and tunnel crown, respectively, regardless of basement geometry. By increasing basement length and width by five times, the maximum movements of tunnel located at the side of basement and directly underneath the basement increase by 450% and 186%, respectively. Obviously, tunnel movements are more sensitive to basement length rather than basement width. For basement excavated at a side of an existing tunnel, tunnel movements at basement centerline become stable when basement length reaches 10 H_e (i.e., final excavation depth). Moreover, tunnel heaves due to overlying basement excavation become stable when the normalized basement length (L/H_e) is larger than 8.0. As tunnel cover to diameter ratio varies from 2.5 to 3.0, the maximum heave and tensile strain of tunnel due to overlying basement excavation decrease by up to 41.0% and 44.5%, respectively. If basement length is less than 8 H_e, the assumption of plane strain condition of basement-tunnel interaction grossly overestimates tunnel movements, and ignores tensile strain of tunnel along its longitudinal direction. Thus, three-dimensional numerical analyses are required to obtain a reasonable estimation of tunnel responses due to adjacent and overlying basement excavations in clay.

• 소성∙가공
• /
• 제8권4호
• /
• pp.374-383
• /
• 1999

To determine the flow stress of semi-solid materials, a new combined method has been studied by experimental and analytic technique in the current approach. Using backward extrusion experiment and its numerical analysis, the characterization scheme of semi-solid materials according to the change of initial solid volume fraction has been proposed. Because that solid volume fraction is sensitive to temperature change, it is required to precisely control the temperature setting. Model materials can guarantee the establishment of material characterization technique from the noise due to temperature change. Thus, clay mixed with bonded abrasives was used for experiment and the change of initial solid fraction was copied out through the variation of mixing ratio. Upper bound method was adapted to increase in efficiency of the calculation in numerical analysis and new kinematically admissible velocity field was employed to improve the accuracy of numerical solution. It is thought that the material characterization scheme proposed in this study can be applied to not only semi-solid materials, but also other materials that is difficult to obtain the simple stress state.

• 한국농공학회지
• /
• 제26권3호
• /
• pp.81-89
• /
• 1984

To examine the moisture adsorption and permeability characteristics, weathered granite soils of different degrees of weathering, cultivated upland soils and sands of Han-river were sampled. The results are as follows: 1. In case that the mother rock was same, the pF values under same moisture content decreased according as the grain size of soil became finer by the weathering process. 2. In case that the mother rock was different, the pF value varied by the behavior of clay minerals, and the cultivated upland soils showed more sensitive reaction than sands and fresh granite soils. 3. The pF value changed by the difference of primary moisture content and also influenced by soil structure, testing method and etc. 4. The pF value and compaction curve had close relation, however under same moisture content, the pF value decreased by the increment of density. 5. The permeability depend on the available void ratio between the soil particles according to the degree of weathering, and the pF value of available void water between the soil particles which related directly to permeability was about 3.3 except the void water holded in the soil particles. 6. As the above, the pF value and permeability were differentiated by degree of weathering, primary moisture content, density and etc. Therefore it is considered unreasonable to define uniformly by soil texture.

• 한국지반공학회논문집
• /
• 제19권1호
• /
• pp.131-142
• /
• 2003

본 논문은 점성토 지반에 동전기 공법을 적용할 때 지반내에서 발생하는 현상과 그 특성을 고려하여 전기삼투 현상을 예측하고자 하였다. 이를 위하여 납으로 오염된 카올린에 대해 실내실험을 수행하여, 동전기 처리 동안 변화하는 시료의 전압, 전류, 제타포텐셜, pH분포 등의 물리 화학적 현상 간 상관성을 고려한 전기삼투 유한차분 수치 해석 프로그램을 개발하여 실험 결과와 비교하고 각 현상을 검토하였다. 그 결과, 전기삼투 흐름은 점토의 화학적 특성과 전기적 특성 변화에 매우 민감하였다. 간극수의 이온 농도가 증가하면 흐름속도는 감소하였으며, 시간에 따라 배수량은 감소하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.847-854
• /
• 2004

The resistivity of soils depends on grains size, porosity, water saturation, pore fluid resistivity, caly contents and son on. It is very important to understand the relationship between resistivity and such physical properties of soils, in order to interpret and evaluate ground conditions by using resistivity data obtained from electrical resistivity prospecting. In this paper, to study the relationship between resistivity and physical properties of soils, the resistivity of glass beads and compacted soil samples both in saturated and unsaturated conditions is measured. As the results, the resistivity of saturated soils depends mainly on porosity and clay contents, while that of unsaturated soils is sensitive to compaction conditions, and decreases with increasing water content until the optimum water condition, that is the maximum dry density. But, the relationship between resistivity and water saturation for soils is unique, being independent of compaction energy. Also, the resistivity ratio decrease with increasing water saturation, followed by no significant change of resistivity ratio over 80 percent of water saturation (the optimum water content).

• Structural Engineering and Mechanics
• /
• 제65권1호
• /
• pp.81-89
• /
• 2018

Stone column installation is a convenient method for improvement of soft ground. In very soft clays, in order to increase the lateral confinement of the stone columns, encasing the columns with high stiffness and creep resistant geosynthetics has proved to be a successful solution. This paper presents the results of three dimensional finite element analyses for evaluating improvement in behaviour of ordinary stone columns (OSCs) installed in soft clay by geotextile encasement under monotonic and cyclic loading by a comprehensive parametric study. The parameters include length and stiffness of encasement, types of stone columns (floating and end bearing), frictional angle and elastic modulus of stone column's material and diameter of stone columns. The results indicate that increasing the stiffness of encasement clearly enhances cyclic behaviour of geotextile encased stone columns (GESCs) in terms of reduction in residual settlement. Performance of GESCs is less sensitive to internal friction angle and elasticity modulus of column's materials in comparison with OSCs. Also, encasing at the top portion of stone column up to triple the diameter of column is found to be adequate in improving its residual settlement and at all loading cycles, end bearing columns provide much higher resistance than floating columns.

• 한국물환경학회지
• /
• 제22권1호
• /
• pp.45-50
• /
• 2006

This study was performed to evaluate the air lift reactors (ALR) by variations of HRT and recycling rate. Air lift reactor was composed of bioreactor and clarifier above it. To remove organic matters and nitrogen through the formation of microbic film and filtration, bio-filter reactors were filled with clay, glass, bead, waste plastic, respectively. Influent wastewater was fed to biofilter reactor, and effluent wastewater from bio-filter reactor was injected ALR again, instead of adding external carbon source. Effluent BOD concentration was satisfied with lower than 10 mg/L in recycling rate 100% regardless of the variation of HRT and the kinds of media materials. In HRT 4 hr, recycling rate 100%, BOD removal efficiency rate was from about 85 to 90%, COD removal efficiency rate was higher than 90%. Effluent TN concentration was satisfied with less than 20 mg/L, if HRT was maintained by over than 6 hr regardless of recycling rate and media materials. Over than HRT was 4 hr, microbes concentration in air lift reactor was maintained over than 2,500 mg/L constantly, not sensitive to environmental condition, and organic removal was effective as it was higher.

• 지질공학
• /
• 제15권4호
• /
• pp.447-462
• /
• 2005

본 연구의 목적은 산사태가 발생된 편마암, 화강암 및 퇴적암지역 자연사면의 토층을 대상으로 이들의 미세조직, 입도분포, 광물조성 및 지화학분석을 실시하여, 산사태 발생 에 영 향을 줄 수 있는 토층물질의 특성을 고찰하는데 있다. 이를 위하여 편마암류인 장흥지역, 화강암류인 상주지역, 제3기퇴적암류인 포항지역의 산사태현장 및 그와 대비되는 곳의 토층으로부터 채취 한 흙을 대상으로 레이저입도분석, X-선회절분석 (XRD), 주사전자현미경 (FE-SEM) 및 에너지분산스펙트럼(EDS)을 이용하여 분석하였다. 편마암류와 화강암류지 역은 산사태 발생지역의 토층이 미발생지역에 비해 점토광물의 함량이 더 높은 것으로 나타났는데, 이러한 양상은 화강암지역에서 특히 두드러지는 경향성을 보였다. 따라서 편마암류와 화강암류지역은 점토광물의 함유비율이 산사태에 유의한 영향인자로 간주될 수 있다. 점 토광물로는 일라이트(illite)가 가장 풍부하고 녹니석과 카올리나이트(kaolinite) 순으로 구성 비가 높고, 몬모릴로나이트(montmorillonite)도 부분적으로 함유된다. 제3기퇴적암지역은 편마암류와 화강암류지역에 비해서 점토광물의 함량이 전반적으로 높고 팽창성 점토광물인 몬모릴로나이트의 함유비율이 특히 높다 따라서 이들이 집중호우시 토층의 지지력에 크게 영향을 미침으로써 상대적으로 적은 강우조건에서도 다른 지역보다 산사태가 더 쉽게 발생된다. 그리고 산사태 발생지역과 미발생지역간 광물조성의 차별성이 특징적으로 관찰되지 않아 산사태가 광물조성의 차이에 큰 영향을 받기보다는 국지적인 지형조건이나 흙의 공학적 특성 등에 주로 지배를 받을 것으로 예측된다. 자연사면의 산사태를 연구할 때 기존의 토질 및 지질공학적 특성평가외에도 토층의 풍화특성과 구성 광물의 종류, 점토광물의 함량, 흙입 자의 미세조직과 같은 다양한 지화학적 정보가 추가된다면 산사태 발생 원인을 보다 정확하게 해석할 수 있을 것으로 기대된다.

• 한국토양비료학회지
• /
• 제45권3호
• /
• pp.332-338
• /
• 2012

본 연구는 논토양 경반층의 강도가 콩의 뿌리신장에 미치는 영향을 구명코자 미사질식양토 (Silty clay loam), 미사질양토 (Silt loam), 양토 (Loam) 등 3가지 토성을 대상으로 경반층 강도에 따른 콩 뿌리 및 작물 생육반응을 분석하여 논 콩 재배지 논토양의 생산성 향상을 위한 합리적인 토양경반층 관리 방법을 제시코자 수행한 결과 다음과 같은 결론을 얻었다. 토양 경도경도 변화에 따른 콩의 생육은 토양경도가 증가 할수록 경장, 경직경, 주당협수, 100립중, 콩 수량은 감소되는 것으로 나타났으며 토양경도 변화와 밀접한 부의 선형관계를 보였다. 토성에 따른 토양 경반층 강도별 콩 뿌리의 신장 깊이는 세립질인 미사질식양토에 비해 조립질 토양일수록 깊게 신장하였으며 미사질식양토의 경우 1.00 MPa에서 35 cm 까지 신장하는 반면 2.00 MPa에서는 25 cm로 경반층의 강도가 높아질수록 낮아지는 경향을 보였다. 토양 깊이별 뿌리분포는 미사질식양토의 경우 1.00 MPa에서 57%인 반면, 2.00 MPa로 토양경도 값이 높아지며 따라 각각 60%로 대부분의 뿌리가 표토에 분포하였다. 토양 경반층이 형성된 논토양 (평택통)을 대상으로 인위적으로 토양경도를 1.00, 1.25. 1.50, 1.75, 2.00 MPa의 경반층로 조성한 후 콩의 생육반응을 조사한 결과 토양경도 높아질수록 경장, 경직경, 주장협수는 낮아지는 경향을 보였으며, 콩 수량은 2.00 MPa 처리구가 2,236 kg $ha^{-1}$인 반면 1.00 MPa처리구에서 3,056 kg $ha^{-1}$으로 약 25% 증수되는 것으로 나타났다. 토양의 경반층의 투수력은 1.0 MPa에서 9.56 cm인 반면 1.5 MPa 이상에서 급격하게 감소되는 경향을 보였으며, 토양경도가 높아질수록 용적밀도, 고상은 증가하고, 공극률, 함수율, 액상, 기상 등은 반대로 낮아지는 경향을 보였다. 따라서 논 콩 재배지 토양의 토성별 토양경도에 대한 콩 뿌리신장 최소제한 저항값은 토양 깊이별 뿌리의 분포밀도를 기준으로 미사질식양토 1.14 MPa, 미사질양토은 1.3MPa, 양토 1.6 MPa로 나타났다.