• Korean Journal of Remote Sensing
• /
• v.34 no.3
• /
• pp.481-494
• /
• 2018

The accurate radiative transfer model simulation is essential for an accurate ozone profile retrieval using optimal estimation from backscattered ultraviolet (BUV) measurement. The input parameters of the radiative transfer model are the main factors that determine the model accuracy. In particular, meteorological parameters such as temperature and surface pressure have a direct effect on simulating radiation spectrum as a component for calculating ozone absorption cross section and Rayleigh scattering. Hence, a sensitivity of UV ozone profile retrievals to these parameters has been investigated using radiative transfer model. The surface pressure shows an average error within 100 hPa in the daily / monthly climatological data based on the numerical weather prediction model, and the calculated ozone retrieval error is less than 0.2 DU for each layer. On the other hand, the temperature shows an error of 1-7K depending on the observation station and altitude for the same daily / monthly climatological data, and the calculated ozone retrieval error is about 4 DU for each layer. These results can help to understand the obtained vertical ozone information from satellite. In addition, they are expected to be used effectively in selecting the meteorological input data and establishing the system design direction in the process of applying the algorithm to satellite operation.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.274-279
• /
• 2003

위성영상을 이용한 새만금 지역의 DEM생성을 위하여 waterline method를 사용하였으며, 총 13개의 Landsat thematic mapper (TM) 위성영상 자료를 이용하여 1991년과 2000년 기준의 DEM을 생성하였다. 현장 수준측량 자료를 이용하여 생성된 DEM의 정밀도 검증을 실시하였으며, 2002년 3월에 100m 간격으로 측정된 실측자료를 이용하였다. 해안선 추출은 density slicing 방법을 사용하였으며, 사용된 밴드는 육지의 경계를 구분하는데 많이 쓰이는 밴드 4번, 5번 및 6번 밴드를 선택적으로 사용하였다. 절대고도 값의 대입을 위하여 waterline 추출에 사용된 위성영상의 획득 시간에 대해 해양조사원의 10분 간격 실측 조위를 사용하였으며, 추출된 13개 waterline의 최저 조위는 58cm 이고 최고 조위는 537cm 이다. 추출된 해안선에 수준측량 자료를 이용하여 검증한 결과 RMS 오차 9.91 cm, 표준편차 9.78 cm의 정밀도를 갖는 2000년도 DEM을 생성하였다. 새만금 지역의 waterline 추출 과정에서 만경강과 동진강 하구 지역은 강에 의한 에너지의 유입, 유출로 인한 변화가 심하여 두 지역을 DEM 생성에서 제외하였다. 이렇게 생성된 과거(19991년도) DEM과 현재(2000년도) DEM을 이용한 지형변화 비교는 두DEM 차이로 9년간의 새만금 조간대 변화를 계산하였다. 군산공항지역의 지형변화는 거의 없는 것으로 나타났으며, 새만금 방조제가 건설된 이후 개화도 주변지역의 변화가 가장 두드러진 지형적 변화로서 방조제 입ㆍ출구 지역은 빠른 유속에 의해서 과거에 비해 침식이 우세하며, 방조제에서 육지로 갈수록 퇴적이 우세한 것으로 관측되었다.보체계의 구축사업의 시각이 행정정보화, 생활정보화, 산업정보화 등 다양한 분야와 결합하여 보다 큰 시너지 효과와 사용자 중심의 서비스 개선을 창출할 수 있는 기반을 제공할 것을 기대해 본다.. 이상의 결과를 종합해볼 때, ${\beta}$-glucan은 고용량일 때 직접적으로 또는 $IFN-{\gamma}$ 존재시에는 저용량에서도 복강 큰 포식세로를 활성화시킬 뿐 아니라, 탐식효율도 높임으로써 면역기능을 증진 시키는 것으로 나타났고, 그 효과는 crude ${\beta}$-glucan의 추출조건에 따라 달라지는 것을 알 수 있었다.eveloped. Design concepts and control methods of a new crane will be introduced in this paper.and momentum balance was applied to the fluid field of bundle. while the movement of′ individual material was taken into account. The constitutive model relating the surface force and the deformation of bundle was introduced by considering a representative prodedure that stands for the bundle movement. Then a fundamental equations system could be simplified considering a steady state of the process. On the basis of the simplified model,

• Science of Emotion and Sensibility
• /
• v.20 no.1
• /
• pp.17-30
• /
• 2017

Lots of interdisciplinary studies for fusion of high technologes and the other areas of research had been tried in these days. In sports training area, high technologies like a vital sign sensor or an accelerometer were adopted as training tools to improve the performance of the sports players. The purpose of this study is finding the proper locations on the human body for attaching the motion sensors in order to develop a smart sportswear which could be helpful in training players. The rowing was selected as a subject sport as lots of movements of the joint on human body could be seen in rowing motions. The players of rowing could be devided into two weight divisions, the lightweight and the heavyweight. In this study, the change rates of distance between markers on human skin as the players moved were took on the back, the elbow, the hip and the knee area on human body by 3D motion capturing system. The distances between markers and the differences between the lightweight and heavyweight were analyzed. Finally, this study provided the guide lines for designing a motion sensing smart sportswear.

• Korean Journal of Optics and Photonics
• /
• v.33 no.4
• /
• pp.167-176
• /
• 2022

Adaptive optics (AO) systems compensate for atmospheric disturbance, especially phase distortion, by introducing counter-wavefront deformation calculated from real-time wavefront sensing or prediction. Because AO system implementations are time-consuming and costly, it is highly desirable to estimate the system's performance during the development of the AO system or its parts. Among several techniques, we mostly apply statistical analysis, computational simulation, and optical-bench tests. Statistical analysis estimates performance based on the sum of performance variances due to all design parameters, but ignores any correlation between them. Computational simulation models every part of an adaptive optics system, including atmospheric disturbance and a closed loop between wavefront sensor and deformable mirror, as close as possible to reality, but there are still some differences between simulation models and reality. The optical-bench test implements an almost identical AO system on an optical bench, to confirm the predictions of the previous methods. We are currently developing an AO system for a 1.6-m ground telescope using a deformable mirror that was recently developed in South Korea. This paper reports the results of the statistical analysis and computer simulation for the system's design and confirmation. For the analysis, we apply the Strehl ratio as the performance criterion, and the median seeing conditions at the Bohyun observatory in Korea. The statistical analysis predicts a Strehl ratio of 0.31. The simulation method similarly reports a slightly larger value of 0.32. During the study, the simulation method exhibits run-to-run variation due to the random nature of atmospheric disturbance, which converges when the simulation time is longer than 0.9 seconds, i.e., approximately 240 times the critical time constant of the applied atmospheric disturbance.

• Journal of Korea Spatial Information System Society
• /
• v.8 no.1 s.16
• /
• pp.1-16
• /
• 2006

Recently, human based computing environment for supporting users to concentrate only user task without sensing other changes from users is being progressively researched and developed. But middleware deletes steream data processed for reducing process load of massive information from RFID sensor in this computing. So, this kind of middleware have problems when user demands probability or statistics needed for data warehousing or data mining and when user demands very important stream data repeatedly but already discarded in the middleware every former time. In this paper, we designs Sensor Middleware Architecture on Multi Level Spatial DBMS with Snapshot and manage repeatedly required stream datas to solve reusing problems of historical stream data in current middleware. This system uses disk databse that manages historical stream datas filtered in middleware for requiring services using historical stream information as data mining or data warehousing from user, and uses memory database that mamages highly reuseable data as a snapshot when stream data storaged in disk database has high reuse frequency from user. For the more, this system processes memory database management policy in a cycle to maintain high reusement and rapid service for users. Our paper system solves problems of repeated requirement of stream datas, or a policy decision service using historical stream data of current middleware. Also offers variant and rapid data services maintaining high data reusement of main memory snapshot datas.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.11
• /
• pp.1-8
• /
• 2005

In this paper, we present design and prototyping of a low-cost, integrated multi-functional micro health sensor chip that can be used or embedded in widely consumer devices, such as cell phone and PDA, for monitoring environmental condition including air pressure, temperature and humidity. This research's scope includes basic individual sensor study, architecture for integrating sensors on a chip, fabrication process compatibility and test/evaluation of prototype sensors. The results show that the integrated TPH sensor has good characteristics of ${\pm}\;1\%FS$ of linearity and hysteresis for pressure sensor and temperature sensor and of ${\pm}\;5\%FS$ of linearity and hysteresis But if we use 3rd order approximation for humidity sensor, full scale error becomes much smaller and this will be one of our future study.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.80-83
• /
• 1999

An efficient modeling and management of a large amount of surface data for a wide rage of geographic information play an important role in determining the functionality of 3D geographic information system. It has been put many efforts to design and manage an effective way to enhence the manipulation of the data by considering geometry type and data structures. Recently, DEM(Data Elevation Model) and TIN(Triangulated Irregular Network) are used for representing surface data. In this paper, we propose a 3D data processing method. The method utilizes the major properties of DEM and TIN, respectively. Furthermore, by approximating DEM with a TIN of an appropriate resolution, we can support a fast and realistic surface modeling. We implement the structure with the following 4 level stages. The first is an optimal resolution of DEM which represent all of wide range of geographic data. The second is the full resolution DEM which is a subarea of original data generated by user's selection in our implemeatation. The third is the TIN approximation of this data with a proper resolution determined by the relative position with the camera. And the last step is multi-resolution TIN data whose resolution is dynamically decided by considering which direction user take notice currently. Specially, the TIN of the last step is designed for realtime camera navigation. By using the structure we implemented realtime surface clipping, efficient approximation of height field and the locally detailed surface LOD(Level of Detail). We used the initial 10-meter sampling DEM data of Seoul, KOREA and implement the structure to the 3D Virtual GIS based on the Internet.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.353-356
• /
• 2005

In Taiwan, there are more the one hundred GPS tracking stations maintained by Ministry of the Interior (MOI), Academia Sinica, Central Weather Bureau and Central Geological Survey. In the further, they may be instead of the GPS controlling points after giving the lawful status. In other words, the engineers don't need to survey on the reference points when they are surveying in the field. They only need to download the GPS data via internet and process the observations in their company. The precise coordinates of the unknown points will be obtained. Therefore, the data qualities of the tracking stations are more and more important. In this study, six data quality indexes were adopted as follows: observations, cycle slips, multipath on L1, multipath on L2, clock offset and frequency stability. Besides, the relationships of the indexes and the positioning precision were found. The frequency stability of GPS receiver is the most important index, the cycle slip is the second index and the mutlipath is the third index. According to the results, the auto-analytical system of GPS data quality was established and the tracking stations were monitored. When the receiver got some problem or the station's environment changed, we hope to find and resolve the problems earlier to make sure the high data quality of the tracking stations. Moreover, we try to design a data quality verification to help users and let the engineers have more and more confidence when they use the data of GPS tracking stations.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1089-1096
• /
• 2019

Recently, small-scale IoT services using a small amount of information through low-performance computing have been spread. It requires low cost, low-power, and long-distance communication technologies with wide communication radius, relatively low power consumption. This paper proposes a MAC layer and routing protocol that supports multi-hop transmission in small-scale IoT environment distributed over a large area based on LoRa communication and delivering a small amount of sensing data. The terminal node is mobile and the communication type provides bidirectional transmission between the terminal node and the network application server. By applying the proposed protocol, a production line monitoring system for smart factory was implemented. It was confirmed that the basic monitoring functions are normally performed.

• KIISE Transactions on Computing Practices
• /
• v.22 no.11
• /
• pp.576-582
• /
• 2016

Currently, every person possesses a smart phone due to the development of the IT industry. However, crosswalk pedestrian accidents have been sharply increasing due to smart phone use. If a traffic light can recognize smart phones when a smart-phone user approaches and arrives at a given sign, many accidents could be reduced by using beacon signals. Before the era of smart phones, the accident rate involving cell phone use was relatively low. Nevertheless, when considering the development of IT equipment that produces a threat to human life, government cannot regulate smart phone use outside. The purpose of this paper is to indirectly warn a smart phone user in order to reduce the accident rates.