• Elastomers and Composites
• /
• 제34권4호
• /
• pp.299-314
• /
• 1999

Bonding metal and textile components to rubber has always posed a problem. In this paper, an attempt had been made to modify textile and metal surfaces for bonding with rubber. The metal surfaces were modified using silane coupling agents and textile fibers were modified using plasma polymerization techniques. Some results on adhesion of metals to a range of sulfur-cured rubber compounds using a combination of organofunctional silanes are given here. The treatment was not only effective for high-sulfur compounds but also for low-sulfur com pounds as used in engine mounts and even for some semi-EV compounds. Coatings of plasmapolymerized pyrrole or acetylene were deposited on aramid and polyester tire cords. Standard pull-out force adhesion measurements were used to determine adhesion of tire cords to rubber compounds. The plasma coatings were characterized by various techniques and the performance results are explained in an interpenetrating network model.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.230-233
• /
• 2004

The stochiometric mix of evaporating materials for the $CuInS_2$ single crystal thin films was prepared from horizontal furnance. Using extrapolation method of X-ray diffraction patterns for the $CuInS_2$ polycrystal, it was found tetragonal structure whose lattice constant $a_0$ and $c_0$ were $5.524\;{\AA}$ and $11.142\;{\AA}$, respectively. To obtain the single crystal thin films, $CuInS_2$ mixed crystal was deposited on throughly etched semi-insulator GaAs(100) substrate by the hot wall epitaxy (HWE) system. The source and substrate temperature were 640 t and 430 t, respectively and the thickness of the single crystal thin films was $2{\mu}m$. Hall effect on this sample was measured by the method of van dot Pauw and studied on carrier density and temperature dependence of mobility. The carrier density and mobility deduced from Hall data are $9.64{\times}10^{22}/m^3,\;2.95{\times}10^{-2}\;m^2/V{\cdot}s$ at 293 K, respectively The optical energy gaps were found to be 1.53 eV at room temperature. From the photocurrent spectrum by illumination of perpendicular light on the c - axis of the thin film, we have found that the values of spin orbit coupling splitting ${\Delta}So$ and the crystal field splitting ${\Delta}Cr$ were 0.0211 eV and 0.0045 eV at 10 K, respectively. From PL peaks measured at 10K, 807.7nm (1.5350ev) mean Ex peak of the free exciton emission, also 810.3nm (1.5301eV) expresses $I_2$ peak of donor-bound exciton emission and 815.6nm (1.5201eV) emerges $I_1$ peak of acceptor-bound exciton emission. In addition, the peak observed at 862.0nm (1.4383eV) was analyzed to be PL peak due to donor-acceptor pair(DAP).

• Elastomers and Composites
• /
• 제37권2호
• /
• pp.86-98
• /
• 2002

본 연구에서는 실리카/카본블랙 혼합사용과 카본블랙 단독 사용의 경우 상온 또는 고온에서의 인장강도(modulus) 및 인열저항성, 내cutting성, 내crack성을 비교 평가하였다. 실리카와 카본블랙의 함량비 및 단계배합 방법을 통해 NR 가황물을 제조하였으며, 충전제의 함량은 60phr로 고정하였고, semi-EV 가황시스템을 적용하여 실험을 실시하였다. 실리카의 분산은 25phr이하일 때 양호하였으며, 실리카/카본블랙의 함량비가 25/35인 경우 인열에너지, 내crack특성, 내cutting특성이 가장 우수하였다. 충전제로써 카본블랙 단독사용과 실리카/카본블랙(25/35) 혼합사용의 경우를 비교해 보면, 열화에 따른 modulus 및 인장강도, 인열에너지는 실리카/카본블랙(25/35)을 사용한 시편이 더 낮은 감소율을 나타내었다. Cutting특성에서는 카본블랙 단독 사용보다는 실리카/카본블랙(25/35) 혼합사용의 경우가 더 높은 cutting 저항성을 나타내었다. 내crack 특성 또한 실리카/카본블랙(25/35)을 혼합사용한 경우가 온도에 따른 더 높은 변형에너지 완화율(Gp)에도 불구하고 더 낮은 크랙성장속도를 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.111-112
• /
• 2005

To obtain the single crystal thin films, $CuInSe_2$, mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the hot wail epitaxy (HWE) system. The source and substrate temperatures were 620$^{\circ}C$ and 410$^{\circ}C$, respectively. The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobilily of $CuInSe_2$ single crystal thin films measured with Hall effect by van der Pauw method are $9.62\times10^{16}$ $cm^{-3}$ and $296cm^2/V{\cdot}s$ at 293 K, respectively. The temperature dependence of the energy band gap of the CulnSe$_2$ obtained from the absorption spectra was well described by the Varshni's relation E$_g$(T) = 1.1851 eV - ($8.99\times10^{-4}$ ev/K)T$_2$/(T + 153K). After the as-grown $CuInSe_2$ single crystal thin films was annealed in Cu-, Se-, and In-atmospheres the origin of point defects of $CuInSe_2$ single crystal thin films has been investigated by the photoluminescence(PL) at 10 K. The nat ive defects of V$_{Cu}$, $V_{Se}$, Cu$_{int}$, and $Se_{int}$ obtained by PL measurements were classified as a donors or accepters type. And we concluded that the heat-treatment in the Cu-atmosphere converted $CuInSe_2$ single crystal thin films to an optical n-type. Also, we confirmed that In in $CuInSe_2$/GaAs did not form the native defects because In in $CuInSe_2$ single crystal thin films existed in the form of stable bonds.

• 한국결정성장학회지
• /
• 제9권2호
• /
• pp.197-206
• /
• 1999

수평 전기로에서 $AgInSe_2$다결정을 합성하여 HWE(Hot Wall Epitaxy) 방법으로 $AgInSe_2$ 단결정 박막을 반절연성 GaAs(100) 위에 성장하였다. $AgInSe_2$단결정 박막은 증발원과 기판의 온도를 각각 $610^{\circ}C$, $450^{\circ}C$로 성장하였다. 이때 성장된 단결정 박막의 두께는 3.8$\mu\textrm{m}$였다. 단결정 박막의 결정성의 조사에서 20 K에서 측정한 광발광 스펙트럼은 884.1nm(1.4024eV) 근처에서 excition emission 스펙트럼이 가장 강하게 나타났으며, 또한 이중결정 X-선 회절곡선(DCXD)의 반폭치(FWHM)도 125arcsec로 매우 작은 값으로 측정되어 최적 성장 조건임을 알 수 있었다. Hall 효과는 van der Pauw 방법에 의해 측정되었으며, 온도에 의존하는 운반자 농도와 이동도는 293K에서 각각 $9.58{\times}10^{22} electron/m^3,\; 3.42{\times}10^{-2}m^2/V{\cdot}s$였다. $AgInSe_2$단결정 박막의 광전류 단파장대 봉우리들로부터 20K에서 측정된 $\Delta$Cr(Crystal field splitting)은 0.12eV, $\Delta$So(spin orbit coupling)는 0.29 eV였다. 20K에서 얻어진 광발광 봉우리들 중에서 881.1nm(1.4071 eV)와 882.4nm(1.4051 eV)는 free exciton$E_x$의 upper polariton과 lower polariton인$E_x^U$와 $E_x^L$를 의미하며, 884.1nm(1.4024 eV)는 donor-bound exciton emission에 의한 $I_2$봉우리를, 885.9nm(1.3995 eV)는 acceptor-bound exciton emission에 의한 $I_1$ 봉우리를 각각 나타내었다. 또한 887.5nm(1.3970 eV)에서 관측된 봉우리는 DAP(donor-acceptor pair)에 기인하는 광발광 봉우리로 해석되었다.