• New & Renewable Energy
• /
• v.17 no.1
• /
• pp.40-49
• /
• 2021

In this study, the optical properties, heat transfer capabilities and chemical reaction performance of a methane thermal decomposition reactor using solar heat as a heat source were numerically analyzed on the basis of the cavity shape. The optical properties were analyzed using TracePro, a Monte Carlo ray tracing-based program, and the heat transfer analysis was performed using Fluent, a CFD program. An indirect heating tubular reactor was rotated at a constant speed to prevent damage by the heat source in the solar furnace. The inside of the reactor was filled with a porous catalyst for methane decomposition, and the outside was insulated to reduce heat loss. The performance of the reactor, based on cavity shape, was calculated when solar heat was concentrated on the reactor surface and methane was supplied into the reactor in an environment with a solar irradiance of 700 W/㎡, a wind speed of 1 m/s, and an outdoor temperature of 25℃. Thus, it was confirmed that the heat loss of the full-cavity model decreased to 13% and the methane conversion rate increased by 33.5% when compared to the semi-cavity model.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.448-451
• /
• 2008

For resource Recycle society, the Ministry of Environment is recently propeling the introduction of MSW(Municipal Solid Waste) pretreatment facilities(MBT) from advanced country such as Germany. On the basis of this, The Ministry of Environment plans to expand all over the country after the adaption of wide area style(Sudokwon landfill : 200 ton/day), urban communities style(Bucheon City : 90 ton/day), Semi-urban(Gangreung City : 150 tons/a day), farm village style (Buan : 30 ton/day).

• Journal of Welding and Joining
• /
• v.18 no.4
• /
• pp.55-63
• /
• 2000

This paper presents a study of the solder bumping process. The theoretical model, based on the variational principle instead of solving the Navier-Stokes equation with moving boundaries, was developed to considered the energy dissipation in semi-solid phase and the approximate solidification time of the molten metal droplet. The simulation results revealed that the developed model could reasonably describe the collision behavior of molten metal with solid surface. Simulations were made with variation of initial droplet temperature, substrate metal and initial substrate temerature.

• Journal of information and communication convergence engineering
• /
• v.4 no.1
• /
• pp.46-52
• /
• 2006

Precipitation measurement with ground-based radar needs an information of the raindrop size distribution (RSD) characteristics. A 10-month dataset was collected in tropical Atlantic coastal zone of northeastern Brazil where the weather radar was installed. The number of drop was mainly recorded in 300 - 500 drop $mm^{-3}$, of which the maximum was registered around 1.1 mm drop diameter.

• Journal of Magnetics
• /
• v.3 no.1
• /
• pp.1-3
• /
• 1998

Valence state of the Sm metal is investigated using the total energy linearized muffin-tin orbital (LMTO) band method for the observed Sm-type crystal structure. We have considered both the relativistic and the semi-relativistic description of 4f-core electrons. We have found that, in the paramagnetic phase of bulk Sm, the trivalent valence state is more stable at the observed lattice constant than the divalent valence state.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.303-306
• /
• 2011

Although PV module manufacturing and its structure are simple, the semi-permanent products can be used out doors for more than twenty years. Therefore it is need to choose proper materials and optimize manufacturing process. This paper suggest that factors of degradation need to be studied to achieve a more understanding of PV module Degradation rates and material failure. Nowadays durability of the PV Module is very important to sustain output safety for obtaining reliability. This paper is about the experiment that soldering uniformity of soldering process and to make least void from soldering process. From This study soldering flux residue and soldering method is main factor to form void blocked soldering uniformity and by using this.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.1
• /
• pp.1-19
• /
• 2020

In an underlay cognitive simultaneous wireless information and power transfer (SWIPT) network, communication from secondary user (SU) to secondary destination (SD) is accomplished with decode-and-forward (DF) relays. Multiple energy-constrained relays are assumed to harvest energy from SU via power splitting (PS) protocol and complete SU secure information transmission with beamforming. Hence, physical layer security (PLS) is investigated in cognitive SWIPT network. In order to interfere with eavesdropper and improve relay's energy efficiency, a destination-assisted jamming scheme is proposed. Namely, SD transmits artificial noise (AN) to interfere with eavesdropping, while jamming signal can also provide harvested energy to relays. Beamforming vector and power splitting ratio are jointly optimized with the objective of SU secrecy capacity maximization. We solve this non-convex optimization problem via a general two-stage procedure. Firstly, we obtain the optimal beamforming vector through semi-definite relaxation (SDR) method with a fixed power splitting ratio. Secondly, the best power splitting ratio can be obtained by one-dimensional search. We provide simulation results to verify the proposed solution. Simulation results show that the scheme achieves the maximum SD secrecy rate with appropriate selection of power splitting ratio, and the proposed scheme guarantees security in cognitive SWIPT networks.

• Journal of Korean Vacuum Science & Technology
• /
• v.4 no.1
• /
• pp.1-5
• /
• 2000

The C 1s photoelectron energy loss spectra of tris (8-hydroxy-quinoline) aluminum (Alq$_3$) and N,N'-diphenyl-N,N'-bis (3-methyl phenyl)-1,1'-bi-phenyl-4,4'-diamine (TPD) thin films have been investigated. Two major loss structures, namely the plasmon dominated loss lines and shake-up satellites, have been observed. The shake-up spectrum of the C 1s photoelectron line is directly related to the $\pi$-$\pi$$\^$*/ energy gap of the molecule which plays an important role in organic electroluminescent materials. The molecular orbitals of Alq$_3$ and TPD and their major components, quinolime and benzene, have been calculated with the AMI semi-empirical method. The amount of the plasma-dominated loss of Alq$_3$ and TPD, which has to do with the delocalization of electrons through the molecule, was about 24 eV, alike in both cases. The main peak of the C 1s shake-up spectrum of Alq$_3$ and TPD, however, was 5.2 eV and 6.8 eV respectively. It was found that the main shake-up peak reflects more the local $\pi$\longrightarrow$\pi$$\^$*/ transition of quinoline and benzene component rather than the excitation of the whole molecule of Alq$_3$ and TPD. The C 1s shake-up spectra, however, revealed some correlation with the optical energy gap of the organic eletroluminescent materials.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.138-141
• /
• 2010

In this paper, we propose a semi-automatic method for semantic video object extraction which extracts meaningful objects from an input sequence with one correctly segmented training image. Given one correctly segmented image acquired by the user's interaction in the first frame, the proposed method automatically segments and tracks the objects in the following frames. We formulate the semantic object extraction procedure as an energy minimization problem at the fragment level instead of pixel level. The proposed energy function consists of two terms: data term and smoothness term. The data term is computed by considering patch similarity, color, and motion information. Then, the smoothness term is introduced to enforce the spatial continuity. Finally, iterated conditional modes (ICM) optimization is used to minimize energy function in a globally optimal manner. The proposed semantic video object extraction method provides faithful results for various types of image sequences.

• Steel and Composite Structures
• /
• v.36 no.2
• /
• pp.197-211
• /
• 2020

Application of the steel ring as a type of seismic fuse has been one of the efforts made by researchers in recent years aiming to enhance the ductility of the bracing systems which in turn, possesses various advantages and disadvantages. Accordingly, to alleviate these disadvantages, an innovative bracing system with a diamond scheme equipped with a steel ring is introduced in this paper. In this system, the braces and yielding circular damper act in parallel whose main functionality is to increase ductility, energy absorption and mitigate drawbacks of the existing bracing systems, in which the braces and yielding circular damper act in parallel. To conduct the experimental tests, specimens with three types of rigid, semi-rigid and pinned connections were built and subjected to cyclic loading so that their performance could be analyzed. Promisingly, the results indicate both great applicability and efficiency of the proposed system in energy absorption and ductility. Moreover, it was concluded that as the braces and damper are in parallel, the use of a steel ring with smaller size and thickness would result in higher energy absorption and load-resisting capacity when compared to the other existing systems. Finally, to assess the potential of numerically modeling the proposed system, its finite element model was simulated by ABAQUS software and observed that there is a great agreement between the numerical and experimental results.