• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.5
• /
• pp.720-726
• /
• 2006

In an attempt to develop an artificial diet for growing olive flounder (Paralichthys olivaceus), weight gain, feed utilization and nutrient retention were investigated in fish fed moist (MP), semi-moist (SMP) and extruded pellets (EP). Excretion of nitrogen and phosphorus was also estimated based on their whole body gain and intake. EP and MP composed of raw fish and SMP made of formulated powder feed with water were prepared to have the same energy contents on a dry matter basis. A total of 240 fish with an average initial weight of 120 g were randomly distributed to each (20 fish/tank) of 12 circular plastic tanks (4 tanks/treatment) and fed experimental diets for 8 weeks. Fish groups fed EP (209 g) or SMP (209 g) recorded higher final weight than those fed MP (176 g), while dry feed consumption was highest in SMP groups (106 g), followed by MP (71 g) and EP groups (62 g). As a consequence, fish groups fed EP showed much lower feed conversion ratio than the other two groups. Protein efficiency ratio was also significantly higher in fish groups fed EP (2.55) than in those fed MP (1.44) and SMP (1.31). Fish groups fed EP, which showed the highest nitrogen retention of 43.9%, resulted in the lowest excretion of nitrogen of 35.5 g per kg gain. Also, the lowest phosphorus excretion of 6.0 g per kg gain was found in the EP groups with the highest P retention (37.0%) among treatments. Although the EP groups had the lowest dietary energy intake, they retained the highest energy in the whole body among treatments. The present results showed that EP could be more advantageous than MP or SMP in terms of growth, feed utilization and excretion of nitrogen and phosphorus for olive flounder.

• Korean Journal of Community Nutrition
• /
• v.7 no.1
• /
• pp.58-66
• /
• 2002

The purpose of the study was to develop and evaluate the reliability of a semi-quantitative food frequency questionnaire (SFFQ) intended to measure mainly nutrient intake (energy, protein, fat, calcium and iron) related to growth in pre-schoolers in Korea. Based on foods with up to 90 cumulative percent contribution of the 5 nutrients, we developed a SFFQ for 86 foods. In order to evaluate the reliability of both nutrient and food intakes, caregivers of a sample of 101 children aged 4 to 6 years completed the SFFQ repeatedly at 3 month intervals. There were small differences in the nutrient intakes assessed by the SFFQ ranging from 0.55% to 9.91%. There were no significant differences in nutrient values calculated from the repeat questionnaires, except in the case of niacin and vitamin C. The Pearson correlation coefficients of most of the nutrients ranged form 0.54 to 0.75 (mean = 0.66). When energy intake was adjusted, there was approximately a 0.2 decrease in the correlation coefficient of most nutrients, due to the high correlation of energy intake with other nutrients (r=0.7-0.9). The amount of food intake differed by 0.1 to 66.4% (mean = 17.5%), depending on the food item. Out of 86 foods, 74 foods (86%) showed less than a 30% difference in intake and 30 foods (35%) showed less than a 10% difference. Only 6 (7%) out of the 86 foods presented statistically significant differences in intake. The Spearman correlation coefficients of most food intakes assessed repeatedly by the SFFQ ranged from 0.4 to 0.7. Reproducibility of the nutrient and food intakes found in this study was better or similar to those found in cases of Korean adults. Therefore, the SFFQ developed in the present study can be a useful tool to assess the dietary intake of pre-schoolers in Korea.

• Elastomers and Composites
• /
• v.49 no.3
• /
• pp.199-203
• /
• 2014

Terpolymer syrups were photopolymerized from 2-ethylhexyl acrylate, 2-hydroxylethyl acrylate and isobornyl acrylate to prepare acrylic pressure sensitive adhesives (PSAs). After polymerization, various crosslinkers as 1,6-hexanediol diacrylate (HDDA), poly (ethylene glycol) diacrylate (PEGDA, Mn = 250, 575, and 700) were added and then UV-irradiated to prepare the semi-IPN type PSAs. Their adhesion performance and storage modulus (G') were strongly dependent on their chemical structure and molecular weight of the crosslinkers. Optical properties such as transmittance (> 92.5 %), haze (< 1.0 %) and color-difference (< 0.3) of PSAs samples were not affected by crosslinker types used in this study.

• Korean Journal of Community Nutrition
• /
• v.7 no.4
• /
• pp.548-558
• /
• 2002

The purpose of this study was to develop a computer software program for nutritional assessment using a Semi-Quantitative Food Frequency Questionnaire (SQFFQs) and the 24-hour Recall Method. The software for the SQFFQ was divided into input, output, and database. For dietary analyses, recipe and food databases were used. The recipe database included 25 items and the food database was divided into 18 food groups. The food database was composed of 19 general nutrient items, 33 fatty acids, and 18 amino acids. The software developed in this study can be summarized as follows: 1) input items related to the individual s ages information, lifestyle, biological values, and dietary habits; 2) individualized data in percent of the Korean RDA, the energy ratios of carbohydrates, proteins and fats, the ratio of animal to plant source intakes, and the distribution of food group intakes; 3) Statistical data on the individual's information, lifestyle, biological values, and dietary intakes including the frequency of intake of cooked foods, the amounts of food, and the number of food groups, and nutrients. In the 24-hour Recall Method, the input and output consisted of the individual s information and cooked dish intakes. The individual s report included the amounts of nutrient intake according to number of meal and days, in comparison to the Korean RDA, the energy ratio for carbohydrates, proteins and fats, the ratio of animal to plant source intakes, and the distribution of food group intakes. The statistical report presented the number of food groups and foods, and the nutrient intakes. To evaluate the validity of the SQFFQ, the Spearman Rank Order Correlation and kappa values were used. As a result, correlation coefficients comparing the 24-hour Recall Method appeared to be more than 0.5, except for vitamin $B_1, B_2$, niacin, and vitamin E. The kappa values for energy and carbohydrate intakes were both 0.7, and protein, fat, vitamin C, folate, Ca, and iron intakes ranged from 0.3 to 0.7.

• Journal of Environmental Science International
• /
• v.24 no.6
• /
• pp.819-826
• /
• 2015

This study measured temperatures and albedos of urban surfaces for different colors and materials during summer, and calculated the energy budget over different urban surfaces to find out the thermal performance affecting the heat built-up. The study selected six surface colors and 13 materials common in urban landscape. Their surface temperatures (Ts) and albedos were measured at a given time interval in the daytime from June to August. Average Ts over summer season for asphalt-colored brick was $4.0^{\circ}C$ higher than that for light red-colored one and $9.7^{\circ}C$ higher than that for white-colored one. The Ts for artificial surface materials of asphalt paving, brown brick wall, and green concrete wall was $6.0^{\circ}C$ higher than that for natural and semi-natural ones of grass, grassy block, and planted concrete wall. There was the greatest difference of $16.3^{\circ}C$ at midafternoon in the Ts between asphalt paving and planted concrete wall. Average albedo over summer season of surface materials ranged from 0.08 for asphalt paving to 0.67 for white concrete wall. This difference in the albedo was associated with a maximum of $15.7^{\circ}C$ difference at midafternoon in the Ts. Increasing the albedo by 0.1 (from 0.22 to 0.32) reduced the Ts by about $1.3^{\circ}C$. Average storage heat at midday by natural and semi-natural surfaces of grass and grassy block was about 10% lower than that by artificial ones of asphalt, light-red brick, and concrete. Reflected radiation, which ultimately contributes to heating the urban atmosphere, was 3.7 times greater for light-red brick and concrete surfaces than for asphalt surface. Thus, surfaces with in-between tone and color are more effective than dark- or white-colored ones, and natural or semi-natural surfaces are much greater than artificial ones in improving the urban thermal environment. This study provides new information on correlation between Ts and air temperature, relationship between albedo and Ts, and the energy budget.

• Nutrition Research and Practice
• /
• v.17 no.4
• /
• pp.747-761
• /
• 2023

BACKGROUND/OBJECTIVES: In Korea, studies of diet in elementary school children are hindered by the need for a comprehensive dietary assessment tool. Thus, the aim of this study was to develop a semi-quantitative food frequency questionnaire (FFQ) for Korean elementary school children. SUBJECTS/METHODS: The 24-h recall data for 1,624 subjects aged 6-11 yrs from the seventh Korea National Health and Nutrition Examination Survey were used to extract the items included in the questionnaire. The FFQ items were developed by selecting major dishes based on the results of nutritional contribution and between-person variability for energy and 14 nutrients (carbohydrate, protein, fat, crude fiber, calcium, phosphorous, iron, sodium, potassium, vitamin A, thiamin, riboflavin, niacin, and vitamin C). We selected the major dishes with over 90% of the total contribution to each nutrient and with over 90% of the accumulated R² for each nutrient. Among the 452 dishes, we selected 248 dishes contributing more than 1% of the total consumption. RESULTS: Finally, the FFQ included 107 items combined from 248 dishes based on nutrient profile and recipe. The FFQ items accounted for an average of 88.6% of the energy, 14 nutrient intakes, and 91.4% of the between-person variability. Quantities of dietary intake were assessed by 9 categories of frequency and 3 categories of portion size. Percentages of coverage for energy, protein, fat, carbohydrate, and calcium were 90.2%, 87.8%, 89.9%, 90.8%, and 88.7%, respectively. CONCLUSIONS: We developed a dish-based, semi-quantitative FFQ comprising 107 items for Korean elementary school children aged 6 to 11. Further studies are needed to evaluate the reproducibility and validity of this FFQ for elementary school children.

• Smart Structures and Systems
• /
• v.10 no.3
• /
• pp.193-207
• /
• 2012

New insights into our previously proposed hybrid-type method for vibration control are highlighted in terms of energy analysis, such as the assessment of energy efficiency and system stability. The hybrid method improves the bang-bang active method by combining it with an energy-recycling approach. Its simple configuration and low energy-consumption property are quite suitable especially for isolated structures whose energy sources are strictly limited. The harmful influence of the external voltage is assessed, as well as its beneficial performance. We show a new chattering prevention approach that both harvests electrical energy from piezoelectric actuators and eliminates the displacement-offset of the equilibrium point of structures. The amount of energy consumption of the hybrid system is assessed qualitatively and is compared with other control systems. Experiments and numerical simulations conducted on a 10-bay truss can provide a thorough energy-efficiency evaluation of the hybrid suppression system having our energy-harvesting system.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.794-800
• /
• 2008

Due to high oil prices and global warming problems, researching an alternative energy source and decreasing the energy usage will be the key in the future. Unlike other alternative energy sources, geothermal energy is less dependent on the surrounding environment. Geothermal energy is the ideal energy source for buildings due to the simple and space saving installation. The system is semi permanent once it is installed and this will help reduce the energy usage in controlling the climate in buildings. Geothermal energy does not emit carbon dioxide and other gases that are harmful to the environment. Therefore geothermal energy will be the key in solving high oil prices and a decrease in fossil fuels by applying the geothermal energy system to detached house to counter future energy crisis.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.144-145
• /
• 2009

Single crystal $CdGa_2Se_4$ layers were grown on a thoroughly etched semi-insulating GaAs(100) substrate at $420^{\circ}C$ with the hot wall epitaxy (HWE) system by evaporating the poly crystal source of $CdGa_2Se_4$ at $630\;^{\circ}C$. The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of single crystal $CdGa_2Se_4$ thin films measured with Hall effect by van der Pauw method are $8.27\;\times\;10^{17}\;cm^{-3}$, $345\;cm^2/V{\cdot}s$ at 293 K, respectively. The photocurrent and the absorption spectra of $CdGa_2Se_4$/SI(Semi-Insulated) GaAs(100) are measured ranging from 293 K to 10K. The temperature dependence of the energy band gap of the $CdGa_2Se_4$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g$(T) = 2.6400 eV - ($7.721\;{\times}\;10^{-4}\;eV/K)T^2$/(T + 399 K). Using the photocurrent spectra and the Hopfield quasi cubic model, the crystal field energy(${\Delta}cr$) and the spin-orbit splitting energy(${\Delta}so$) for the valence band of the $CdGa_2Se_4$ have been estimated to be 106.5 meV and 418.9 meV at 10 K, respectively. The three photocurrent peaks observed at 10 K are ascribed to the $A_1$-, $B_1$-, and $C_{11}$-exciton peaks.

• Journal of Advanced Technology Convergence
• /
• v.2 no.4
• /
• pp.43-48
• /
• 2023

Globally, there is a collaborative effort to achieve global carbon neutrality in response to climate change. In the case of South Korea, greenhouse gas emissions are rapidly increasing, presenting an urgent situation that requires resolution. In this context, this study developed a thermal energy collection device named a 'steam trap' and created an AI model capable of predicting future electricity usage by collecting energy usage data through steam traps. The average accuracy of electricity usage prediction with this AI model was 96.7%, demonstrating high precision. Consequently, the AI model enables the prediction and management of days with high electricity consumption and identifies which facilities contribute to elevated power usage. Future research aims to optimize energy consumption efficiency through efficient equipment operation using anomaly detection in steam traps and standardizing energy management systems, with the ultimate goal of reducing greenhouse gas emissions.