• 한국소음진동공학회논문집
• /
• 제19권11호
• /
• pp.1133-1143
• /
• 2009

좁은 슬롯을 포함한 디스크 브레이크 로터의 소음 방사특성을 전산해석과 이론적 계산을 합성한 방법으로 검토하였다. 첫 단계로 로터와 기본 치수가 동일하고 동일한 슬롯을 보유한 후판 환형 디스크의 소음방사 특성을 유한요소해석을 구한 모달 진동 데이터를 바탕으로 기존의 해법을 이용하여 계산하고 수치해석결과로 검증하였다. 다음으로 이 결과를 유한요소해석으로 구한 샘플 로터의 고유진동 특성에 적용, 고유진동으로 인한 소음방사를 계산한 다음 그 결과를 경계요소법을 이용하여 검증하였다. 마지막으로 이 결과를 바탕으로 로터에 고정된 조화가진 및 로터 주위를 회전하는 조화력에 의해 방사되는 소음 및 진동 특성을 검토하였다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.181-185
• /
• 2007

A free-surface correction(FSC) method is presented to solve the 3-D shallow water equations. Using the mode splitting process, FSC method can simulate shallow water flows under the hydrostatic assumption. For the hydrostatic pressure calculation, the momentum equations are firstly discretized using a semi-implicit scheme over the vertical direction leading to the tri-diagonal matrix systems. A semi-implicit scheme has been adopted to reduce the numerical instability caused by relatively small vertical length scale compare to horizontal one. and, as the free surface correction step the final horizontal velocity fields are corrected after the final surface elevations are obtained. Finally, the vertical final velocity fields can be calculated from the continuity equation. The numerical model is applied to the calculation of the simulation of flow fields in a rectangular open channel with the tidal influence. The comparisons with the analytical solutions show overall good agreements between the numerical results and analytical solutions.

• 한국전산유체공학회지
• /
• 제14권3호
• /
• pp.86-94
• /
• 2009

The non-conservative form of momentum equations is often used for some two-phase flow codes instead of a conservative form because of numerical convenience. Another non-conservative form, so called, a semi-conservative form can improve the numerical solution of these codes maintaining the numerical convenience. It is close to the conservative form but still maintains the feature of the non-conservative form. A semi-conservative form of the momentum equations and a non-conservative form of the momentum equations are implemented in CUPID[1] code. The numerical results of the semi-conservative and the non-conservative forms are compared against analytical solutions and the solutions of the FLUENT code that uses the conservative form. The results clearly showed that the semi-conservative form of the momentum equations provides better solutions than the non-conservative form, especially for heterogeneous two-phase flows.

• 한국해안해양공학회지
• /
• 제17권4호
• /
• pp.232-242
• /
• 2005

본 연구에서 Penney and Price(1952)의 해석 해를 사용하여 반무한방파제, 양익방파제 등에서 발생하는 파랑의 회절 및 다중반사 현상에 대한 해석 해를 구하였다. 구조물에서의 반사 현상을 양익방파제를 지나는 회절 현상으로 간주하여 방파제에서 발생하는 단일반사 및 다중반사 현상을 규명하였다. 이를 바탕으로 방파제의 위치와 입사파랑의 각도에 따라 다른 경우에도 해석해를 구할 수 있다. 이러한 해석해는 국내의 항만 실무자들에게 회절 및 다중반사 현상에 대한 이해를 도울 수 있을 것이며, 실무의 해안 및 항만 구조물 설계 시에 사용되는 수치프로그램들의 정확도를 판단할 수 있는 비교 대상으로 사용될 수 있으리라 판단된다.

• Structural Engineering and Mechanics
• /
• 제54권4호
• /
• pp.607-622
• /
• 2015

This paper presents a comparative study of analytical method and finite element method (FEM) for analysis of a continuous contact problem. The problem consists of two elastic layers loaded by means of a rigid circular punch and resting on semi-infinite plane. It is assumed that all surfaces are frictionless and only compressive normal tractions can be transmitted through the contact areas. Firstly, analytical solution of the problem is obtained by using theory of elasticity and integral transform techniques. Then, finite element model of the problem is constituted using ANSYS software and the two dimensional analysis of the problem is carried out. The contact stresses under rigid circular punch, the contact areas, normal stresses along the axis of symmetry are obtained for both solutions. The results show that contact stresses and the normal stresses obtained from finite element method (FEM) provide boundary conditions of the problem as well as analytical results. Also, the contact areas obtained from finite element method are very close to results obtained from analytical method; disagree by 0.03-1.61%. Finally, it can be said that there is a good agreement between two methods.

• Structural Engineering and Mechanics
• /
• 제13권1호
• /
• pp.103-116
• /
• 2002

A solution based on the linear three-dimensional theory of elasticity is developed for vibration and elastostatic problems of hollow toroids. The theory is developed for transversely isotropic toroids of arbitrary thickness, and has the potential to validate some vehicle and aircraft tire models in the linear range. In the semi-analytical method that is adopted Fourier series are written in the circumferential direction, forming a set of two-dimensional problems. These problems are solved using the differential quadrature method. A commercial finite element program is used to determine alternative solutions. For validation both problems of vibration and elastostatics are considered. Finally results are determined for local surface loading problems, and conclusions are drawn.

• 소음진동
• /
• 제6권5호
• /
• pp.617-624
• /
• 1996

Finite Element Method(FEM) is one of the most popularly used method in analyzing the dynamic behaviors of structures. But unless the number of finite elements is large enough, the results from FEM are somewhat different form exact analytical solutions, especially at high frequency range. On the other hand, as the Spectral Element Method(SEM) deals directly with the governing equations of structures, the results from this method cannot but be exact regardless of any frequency range. However, despite two dimensional structures are more general, the SEM has been applied only to the analysis of one dimensional structures so far. In this paper, therefore, new methodologies are introduced to analyze the two dimensional plate structure using SEM. The results from this new method are compared with the exact analytical solutions by letting the two dimensional plate structure be one dimensional and showed the dynamic responses of two dimensional plate by including various waves propagated into x-direction.

• Structural Engineering and Mechanics
• /
• 제35권1호
• /
• pp.67-82
• /
• 2010

The beam string structure (BSS) has been widely applied in large span roof structures, while no analytical solutions of BSS were derived for it in the existing literature. In the first part of this paper, calculation formulas of displacement and internal forces were obtained by the Ritz-method for the most commonly used arc-shaped BSS under the vertical uniformly distributed load and the prestressing force. Then, the failure mode of BSS was proposed based on the static equilibrium. On condition the structural stability was reliable, BSS under the uniformly distributed load would fail by tensile strength failure of the string, and the beam remained in the elastic or semi-plastic range. On this basis, the limit load of BSS was given in virtue of the elastic solutions. In order to verify the linear elastic and limit state solutions proposed in this paper, three BSS modal were tested and the corresponding elastoplastic large deformation analysis was performed by the ANSYS program. The proposed failure mode of BSS was proved to be correct, and the analytical results for the linear elastic and limit state were in good agreement with the experimental and FEM results.

• Structural Engineering and Mechanics
• /
• 제87권5호
• /
• pp.461-473
• /
• 2023

This study aims to solve for nonlinear cylindrical shell systems with a semi-analytical and numerical approach implementing the P-T method. The procedures and conditions for such a study are presented in practically solving and analyzing the cylindrical shell systems. An analytical model for a nonlinear thick cylindrical shell (TCS) is established on the basis of the stress function and Reddy's higher-order shear deformation theory (HSDT). According to Reddy's HSDT, Hooke's law in three dimensions, and the von-Kármán equation, the stress-strain relations are developed for the thick cylindrical shell systems, and the three coupled nonlinear governing equations are thus established and discretized as per the Galerkin method, for implementing the P-T method. The solution generated with the approach is continuous everywhere in the entire time domain considered. The approach proposed can also be used to numerically solve and analyze the nonlinear shell systems. The procedures and recurrence relations for numerical solutions of shell systems are presented. To demonstrate the application of the approach in numerically solving for nonlinear cylindrical shell systems, a specific nonlinear cylindrical shell system subjected to an external excitation is solved numerically. In numerically solving for the system, the present approach shows higher efficiency, accuracy, and reliability in comparison with that of the Runge-Kutta method. The approach with the P-T method presented is practically sound especially when continuous and high-quality numerical solutions for the shell systems are considered.

• Structural Engineering and Mechanics
• /
• 제81권2호
• /
• pp.179-194
• /
• 2022

The bending, buckling and free vibration responses of functionally graded material (FGM) beams are investigated semi-analytically by the scaled boundary finite element method (SBFEM) in this paper. In the concepts of the SBFEM, the dimension of computational domain can be reduced by one, therefore only the axial dimension of the beam is discretized using the higher order spectral element, which reduces the amount of calculation and greatly improves the calculation efficiency. The governing equation of FGM beams is derived in detail by the means of the principle of virtual work. Compared with the higher-order beam theory, fewer parameters and simpler control equations are used. And the governing equation is transformed into a first-order ordinary differential equation by introducing intermediate variables. Analytical solutions of the governing equation can be obtained by pade series expansion in the direction of thickness. Numerical example are compared with the numerical solutions provided by the previous researchers to verify the accuracy and applicability of the proposed method. The results show that the proposed formulations can quickly converge to the reference solutions by increasing the order of higher order spectral elements, and high accuracy can be achieved by using a small number of the elements. In addition, the influence of the structural sizes, material properties and boundary conditions on the mechanical behaviors of FG beams subjected to different load types is discussed.