• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제28회 추계학술대회
• /
• pp.11-16
• /
• 1998

Condition monitoring technique used in the military is JOAP, for which the spectroscopic analysis is applied. However it is known that the technique has some problems in economical and practical point of view. This study introduces a new technique for measuring wear in real time base and applies the technique to a high power semi-automatic transmission. The results show the feasibility by measuring the concentration of ferrous wear particles from the transmission oil.

• 인재니움
• /
• 제5권1호
• /
• pp.63-67
• /
• 1998

• 대한기계학회논문집
• /
• 제19권3호
• /
• pp.605-614
• /
• 1995

In the automatic transmission using planetary gear there exists nonlinearities due to the finite difference between gear ratios, which yield torque hole during shift and influence on the ride quality and life of clutch. Based on the reaction carrier and converter turbine speed sliding functions are defined. Nonlinear closed-loop control laws are derived using them. Computer simulation shows that the closed loop design is better than the open loop design and semi-closed loop design.

• 한국산학기술학회논문지
• /
• 제15권8호
• /
• pp.4742-4748
• /
• 2014

전북 익산시 R회사에서 기 개발된 세미오토 클러치는 수동클러치 차량의 기어 변속시 클러치 페달을 밟아야하는 불편함을 해소하고자 만들어진 장치로써 클러치 페달을 밟지 않고, 운전자가 기어봉에 위치한 스위치 조작만으로도 클러치 동작을 제어할 수 있다. 차량의 변속과정에서 클러치 동작을 제어하기 위해 센서를 설치하여 차량정보를 수집하여 제어하였다. 그러나, 센서 기반의 제어기는 열악한 운전조건에서 고장 원인이 되고 있으며, 차량에 설치하고 보수하는 과정에서 시간소요가 과다하여 많은 불편을 가지고 있었다. 이를 위해 본 연구에서는 차량의 ECU와 CAN통신을 통해 차량의 주행정보를 수집하여 제어하고, 공압 액추에이터로 클러치를 동작시키는 세미오토 클러치를 개발하였다. 개발된 공압 액추에이터의 정상적인 동작을 위해서는 최소 3bar이상이 요구되었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.674-679
• /
• 2002

As the object of this study, a transmission system with the style of HST in combination with mechanical semi-automatic transmission for application in hydraulic wheel excavators was chosen. The dynamic characteristics of the object transmission was studied by numerical analysis of the mathematical model. The results of numerical analysis showed comparatively good agreements with experimental results, so the validity of the numerical analysis process was ascertained.

• 한국CDE학회논문집
• /
• 제16권4호
• /
• pp.260-267
• /
• 2011

Nowadays, automobile manufacturers are faced with increasing global competition which is required low cost as well as high quality. To reduce shipping and handling cost and delivery time, lots of automobile manufactures tried to build their new factory in the neighborhood of market. Simultaneously, many factories are under construction in developing countries to make efficient use of low-wage workers. However, because systems are installed in developing countries as the same type of domestic facilities, systems have lots of problems such as high installation cost and inefficient use of manpower. To find core problems and generate optimal solution of these problems, thinking process of TOC(Theory Of Constrains) is used. In case of transmission gear machining system, semi-auto system is proposed as the best solution to increase manpower efficiency and system utilization. Semi-auto system consists of automatic machining process and manual transporting process. The system layout is generated based on semi-auto process concept. And, 3D simulation method using QUEST is used to verify production volume of generated system.

• 한국자동차공학회논문집
• /
• 제4권3호
• /
• pp.10-21
• /
• 1996

In this study, as a strategy to improve shift characteristics, the authors developed a new style pressure modulator which can reduce shock torque during power shift by modulating the pattern of pressure increase in the cylinder for actuating the clutch. The remarkable merits of this new pressure modulator lie in its structural simplicity and durability, because the modulator is only composed of a poppet type valve and a few orifices. The usefulness of the new pressure modulator is confirmed by experiments and numerical analyses on a clutch control hydraulic system simplified for easy test. Also, the excellency of the transmission with the new pressure modulator is verified by experiments on a test bench for simulating the running power train of an excavator.

• Journal of Veterinary Science
• /
• 제21권3호
• /
• pp.34.1-34.10
• /
• 2020

Background: A nationwide outbreak of foot-and-mouth disease (FMD) in South Korea caused massive economic losses in 2010. Since then, the Animal and Plant Quarantine Agency (QIA) has enhanced disinfection systems regarding livestock to prevent horizontal transmission of FMD and Avian influenza (AI). Although the amount of disinfectant used continues to increase, cases of FMD and AI have been occurring annually in Korea, except 2012 and 2013. Objectives: This study measured the concentration of the disinfectant to determine why it failed to remove the horizontal transmission despite increased disinfectant use. Methods: Surveys were conducted from February to May 2017, collecting 348 samples from disinfection systems. The samples were analyzed using the Standards of Animal Health Products analysis methods from QIA. Results: Twenty-three facilities used inappropriate or non-approved disinfectants. Nearly all sampled livestock farms and facilities-93.9%-did not properly adjust the disinfectant concentration. The percentage using low concentrations, or where no effective substance was detected, was 46.9%. Furthermore, 13 samples from the official disinfection station did not use effective disinfectant, and-among 72 samples from the disinfection station-88.89% were considered inappropriate concentration, according to the foot-and-mouth disease virus guidelines; considering the AIV guideline, 73.61% were inappropriate concentrations. Inappropriate concentration samples on automatic (90.00%) and semi-automatic (90.90%) disinfection systems showed no significant difference from manual methods (88.24%). Despite this study being conducted during the crisis level, most disinfectants were used inappropriately. Conclusions: This may partially explain why horizontal transmission of FMD and AI cannot be effectively prevented despite extensive disinfectant use.

• 한국환경과학회지
• /
• 제25권10호
• /
• pp.1389-1396
• /
• 2016

A monitoring system for a field magnetometer was configured with assistance of a Raspberry Pi as a data logger. The suggested geomagnetic system uses a semi-real-time data transmission module. The system consists of two parts: a field-observation part and a data-center part. The field-observation part comprises a Raspberry Pi, magnetometer, LTE router, and power source, while the data center part takes samples at the site. The collected magnetometer data are then sent to the data center through the LTE router. The newly designed monitoring system was deployed and checked in Jeju-do island, and found to operate stably. The suggested system is promising in that it is simple and cost saving, providing at least physical insight and knowledge on the complex natural phenomena.

• 농업생명과학연구
• /
• 제52권6호
• /
• pp.127-138
• /
• 2018

본 연구에서는 국내에서 주로 사용되는 채소 정식기를 대상으로 전체적인 작동 특성을 분석하였다. 식부장치 거동에 영향을 주는 주요 구성요소 및 동력전달경로를 파악하였으며, 식부장치의 링크 구조를 기구적으로 분석하고 3D모델링 및 시뮬레이션을 수행하였다. 이를 바탕으로 식부호퍼 극하단점의 궤적을 분석하였다. 또한 엔진회전속도 및 식부변속단수 변화에 따른 주간거리를 도출하고 필드시험을 통해 검증하였다. 주요 결과로써, 식부장치는 10개의 링크와 13개의 회전 조인트로 구성된 1 자유도의 기구이며 각 부분들은 4절 링크식으로 구성되어 있었다. 링크장치의 거동에 의해 식부호퍼는 일정한 자세를 유지하면서 연직 방향으로 묘를 심어준다. 동력은 엔진을 통해 주행부 및 식부로 전달되었으며 식부장치의 최대 및 최소 주간거리는 각각 428.97mm, 261.20mm로 나타났다.