• Computers and Concrete
• /
• v.19 no.6
• /
• pp.659-666
• /
• 2017

Based on the Arrhenius equations, several hydration exothermic models that precisely calculate the influence of concrete's self-temperature duration on its hydration exothermic rate have been presented. However, the models' convergence is difficult to achieve when applied to engineering projects, especially when the activation energy of the Arrhenius equation is precisely considered. Thus, the models' convergence performance should be improved. To solve this problem and apply the model to engineering projects, the relationship between fast iteration and proper expression forms of the adiabatic temperature rise, the coupling relationship between the pipe-cooling and hydration exothermic models, and the influence of concrete's self-temperature duration on its mechanical properties were studied. Based on these results, the rapid convergence of the hydration exothermic model and its coupling with pipe-cooling models were achieved. The calculation results for a particular engineering project show that the improved concrete hydration exothermic model and the corresponding mechanical model can be suitably applied to engineering projects.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.10
• /
• pp.1427-1435
• /
• 2002

The main aim of the present article is numerically to investigate the micro-scale heat transfer phenomena in a silicon microstructure irradiated by picosecond-to-femtosecond ultra-short laser pulses. Carrier-lattice non-equilibrium phenomena are simulated with a self-consistent numerical model based on Boltzmann transport theory to obtain the spatial and temporal evolutions of the lattice temperature, the carrier number density and its temperature. Especially, an equilibration time, after which carrier and lattice are in equilibrium, is newly introduced to quantify the time duration of non-equilibrium state. Significant increase in carrier temperature is observed for a few picosecond pulse laser, while the lattice temperature rise is relatively small with decreasing laser pulse width. It is also found that the laser fluence significantly affects the N 3 decaying rate of Auger recombination, the carrier temperature exhibits two peaks as a function of time due to Auger heating as well as direct laser heating of the carriers, and finally both laser fluence and pulse width play an important role in controlling the duration time of non-equilibrium between carrier and lattice.

• Advances in concrete construction
• /
• v.7 no.4
• /
• pp.277-288
• /
• 2019

The formulation of self-compacting concretes (SCC) and the study of their properties at the laboratory level were currently well mastered. The aim of this work is to characterize SCC under hot climatic conditions and their effects on the properties of fresh and hardened SCC. Particularly, the effect of the initial wet curing time on the mechanical behavior such as the compressive strength and the durability of the SCCs (acid and sulfate attack) as well as the microstructure of SCCs mixtures. In this study, we used two types of cement, Portland cement and slag cement, three water/binder (W/B) ratio (0.32, 0.38 and 0.44) and five curing modes. The obtained results shows that the compressive strength is strongly influenced by the curing methods, 7-days of curing in the water and then followed by a maturing in a hot climate was the optimal duration for the development of a better compressive strength, regardless of the type of binder and the W/B ratio.

• Journal of Mechanical Science and Technology
• /
• v.19 no.6
• /
• pp.1378-1389
• /
• 2005

This work provides the fundamental knowledge of energy transport characteristics during very short-pulse laser heating of semiconductors from a microscopic viewpoint. Based on the self-consistent hydrodynamic equations, in-situ interactions between carriers, optical phonons, and acoustic phonons are simulated to figure out energy transport mechanism during ultrafast pulse laser heating of a silicon substrate through the detailed information on the time and spatial evolutions of each temperature for carriers, longitudinal optical (LO) phonons, acoustic phonons. It is found that nonequilibrium between LO phonons and acoustic phonons should be considered for ultrafast pulse laser heating problem, two-peak structures become apparently present for the subpicosecond pulses because of the Auger heating. A substantial increase in carrier temperature is observed for lasers with a few picosecond pulse duration, whereas the temperature rise of acoustic and phonon temperatures is relatively small with decreasing laser pulse widths. A slight lagging behavior is observed due to the differences in relaxation times and heat capacities between two different phonons. Moreover, the laser fluence has a significant effect on the decaying rate of the Auger recombination.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.52
• /
• pp.203-210
• /
• 1999

We report on some of the preliminary results of the physiological responses resulting from vehicular speed changes. Healthy human subjects (n=5) were studied for the experiments. We measured the physiological responses of the subjects such as Heart Rate Variability (HRV), Galvanic Skin Response (GSR), and skin temperature for day and night vehicular speed change experiments, respectively. Before and after the tasks, we carried out a self-report for acquiring correlation with experiment results. Mean heart rate variability (HRV) and amplitude of GSR and skin temperature were calculated for 3 minutes duration in each state. The analysis of the physiological measures of ANS activity revealed that vehicle speed change-based affective state evoked arousal response pattern featured by HR acceleration, decrease of skin temperature, and increase of GSR amplitude. The obtained results show that despite some differences observed between each state, overall physiological responses show that the activity of the sympathetic nervous system increases as a result of the increase of speed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.336-339
• /
• 2012

Accurate forecasting of pan evaporation (PE) is very important for monitoring, survey, and management of water resources. The purpose of this study is to develop and apply Kohonen self-organizing feature maps neural networks model (KSOFM-NNM) to forecast the daily PE for the dry climate region in south western Iran. KSOFM-NNM for Ahwaz station was used to forecast daily PE on the basis of temperature-based, radiation-based, and sunshine duration-based input combinations. The measurements at Ahwaz station in south western Iran, for the period of January 2002 - December 2008, were used for training, cross-validation and testing data of KSOFM-NNM. The results obtained by TEM 1 produced the best results among other combinations for Ahwaz station. Based on the comparisons, it was found that KSOFM-NNM can be employed successfully for forecasting the daily PE from the limited climatic data in south western Iran.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.3
• /
• pp.141-148
• /
• 2012

Food policy is considered as the most basic and central issue for all countries, while making efforts to keep each country's food sovereignty and enhance food self-sufficiency. In the case of Korea where the staple food is rice, the rice yield prediction is regarded as a very important task to cope with unstable food supply at a national level. In this study, Korean paddy Rice yield Prediction Model (KRPM) developed to predict the paddy rice yield using meteorological element and MODIS NDVI. A multiple linear regression analysis was carried out by using the NDVI extracted from satellite image. Six meteorological elements include average temperature; maximum temperature; minimum temperature; rainfall; accumulated rainfall and duration of sunshine. Concerning the evaluation for the applicability of the KRPM, the accuracy assessment was carried out through correlation analysis between predicted and provided data by the National Statistical Office of paddy rice yield in 2011. The 2011 predicted yield of paddy rice by KRPM was 505 kg/10a at whole country level and 487 kg/10a by agroclimatic zones using stepwise regression while the predicted value by KOrea Statistical Information Service was 532 kg/10a. The characteristics of changes in paddy rice yield according to NDVI and other meteorological elements were well reflected by the KRPM.

• The Korean Journal of Food And Nutrition
• /
• v.21 no.2
• /
• pp.165-175
• /
• 2008

Pacific saury, Cololabis saira kwamaegi, is a traditional local food of the Eastern sea area centering around Pohang. It is well-recognized as being both tasty and nutritious. Nevertheless, bacterial contamination, excessive dryness, and compositional changes have made it edible only during the winter months. Therefore, to improve its storage, this study examined the effects of storage material, type, temperature, and duration on compositional changes in kwamaegi. The studied samples were kwamaegis that had been dried naturally for 15 days. The storage materials included an A-film, a self-developed multi-film made of polyethylene, polyamide, EVOH, and polyethylene; as well as a B-film made of polyethylene, nylon, polyethylene, nylon and polyethylene. The B films were used after pressing and laminating. The storage types included one whole fish(1G), or 2 divided fish(2G), to increase eating convenience. The 2G type was the muscle portion divided vertically after discarding the jowl, skin, and internal organs. The storage temperatures were $0^{\circ}C$, $-15^{\circ}C$, and $-30^{\circ}C$, and the storage durations were 2, 4, and 6 months. Pathogenic bacteria and rheology were measured to observe general compositional changes. The whole kwamaegi showed a total cell number of $1,565{\pm}112$ CFU/100 g flesh, while the divided Kwamaegi showed significantly greater bacterial numbers at $2,031{\pm}145$ CFU/100 g flesh. Psychrophils and halophils increased significantly while coliform were not found; the number of mesophils also increased, but not significantly. There were no significant cell number variations between the A-film and B-film. At $0^{\circ}C$, both the A-and B-films resulted in cell numbers of $115{\sim}212$ CFU/100 g flesh, revealing just $7.3{\sim}10.4%$ of the initial storage levels. Overall, there were no significant differences between the storage materials. Generally, as the storage temperature and duration increased, the moisture content of the kwamaegi decreased. Also, as storage duration and temperature increased, crude protein and crude lipid contents increased; in addition, they increased proportionally as the moisture content of the fish decreased. There were no significant differences in crude ash content with respect to the storage materials, storage temperatures, or storage durations. Finally, there were no significant differences between the kwamaegi samples naturally dried for 15 days and those stored in the B-film vacuum storage for 6 months for strength, hardness, cohesiveness, springiness, gumminess, and water activity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05a
• /
• pp.73-76
• /
• 2003

Phase transformation of Bi-2223 tape during the final heat treatment has been investigated through the various duration time of heat treatment in a specially designed 3-step heat treatment. It was found that the phase assemblage in the sintering was determined by the sintering time and temperature. In this study, sintering time was changed to optimize the Bi-2223 phase assemblage, and acquire high critical current density. High critical current samples with Ic = 85 A and Je = 8.9 kA/$cm^2$ have been measured at 77K and self-field for 55-filament tapes sintered by optimum condition.

• Nuclear Engineering and Technology
• /
• v.56 no.10
• /
• pp.4115-4126
• /
• 2024

The swelling behavior of ferritic/martensitic steels (FC92-B/-N, HT9, and Gr.92) was investigated following 3.5 MeV Fe⁺⁺ ion irradiation. Tested alloys were helium-pre-implanted up to the peak contents of 120 and 240 appm with He/dpa ratio of 1 appm/dpa at room temperature and then exposed to self-ion beam to the peak damage conditions of 120 and 240 dpa at 475 ℃. Field-emission transmission electron microscopy was used to characterize the cavity evolution. FC92-B exhibited the highest resistance to swelling among the irradiated alloys. The final volumetric swelling of FC92-B reached 1.3 % at 70 dpa and 2.9 % at 140 dpa. On the other hand, HT9 exhibited the highest swelling, reaching 7.4 % at 140 dpa. Comparing the present swelling results at 140 dpa/140 appm He with swelling data at 280 dpa/280 appm He from our previous study, it was observed that Gr.92 and FC92-N swelled more at 140 dpa/140 appm He than at 280 dpa/280 appm He. This negative correlation between swelling and dose in Gr.92 and FC92-N is primarily attributed to the helium-associated swelling suppression at higher helium concentration of 280 appm. A bimodal cavity size distribution appeared only in Gr.92 and FC92-N at 280 dpa/280 appm. This result demonstrates that the excess amount of helium over 200 appm promoted early-stabilization of new-born cavities, resulting in preferentially enhanced cavity nucleation, while impeding the growth of nucleated cavities. An inhibition in cavity growth possibly led to an extended duration of nucleation-dominant stages, finally suppressing swelling in ion-irradiated Gr.92 and FC92-N alloys.