• Korean Journal of Optics and Photonics
• /
• v.15 no.2
• /
• pp.104-108
• /
• 2004

A simple dispersion measurement technique has been demonstrated by using a self-seeding laser oscillation of a Fabry-Perot laser through a closed loop. The optical pulses of different wavelengths emitted from the Fabry-Perot laser travel down an optical fiber and the group velocity difference between the pulses due to the chromatic dispersion of the optical fiber is measured through the self-seeding laser oscillation process. The dispersion parameter of the optical fiber is calculated from the measured group velocity difference. The performance of the proposed technique has been confirmed experimentally and the accuracy of dispersion parameter measurement was comparable to that of commercial instruments with expensive equipment and components. The repeatability of the proposed method was better than 0.5%.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.12
• /
• pp.51-57
• /
• 2004

A simple fiber length measurement technique has been demonstrated by using a self-seeding laser oscillation of a Fabry-Perot laser diode. We induced a self-seeding laser oscillation through a closed-loop by adjusting the modulation frequency of a Fabry-Peort laser diode when the output optical pulse of the laser reinjected into the laser after passing through the closed-loop. The length of a fiber-under-test was calculated from the difference between my two modulation frequencies at which self-seeding laser oscillation occurs at a specific mode. We have experimentally confirmed the technique for various fiber lengths from 0.1 km to 75 km. The relative error between the measurement result of the proposed technique and that of a commercial instrument was less than 0.24 %. The repeatability of the proposed technique was better than 0.1 %.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.3
• /
• pp.104-109
• /
• 2021

In this paper, we experimentally demonstrate a self-seeding FP-LD (Fabry Perot Laser Diode) to verify the possibility of a new tunable light source that can be used in WDM-PON (Wavelength Division Multiplexing - Passive Optical Network) system. The conventional implementation of WDM-PON using a tunable light source has a disadvantage that the center wavelength of the AWG (Arrayed Waveguide Grating) device and the tunable light source must be precisely aligned. However, the proposed tunable light source has the advantage that the tunable wavelength is automatically aligned with the center wavelength of the AWG as well as simple structure. The implemented tunable light source had a tunable band of about 14 nm or more, and the maximum RIN (Relative Intensity Noise) of about -124 dB/Hz, which showed the possibility of modulating 10 Gb/s signal by an external modulator.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.4
• /
• pp.234-239
• /
• 2014

This experiment was conducted to evaluate the effect of seeding rates on the forage quality and productivity of direct-seeded whole crop rice at the experimental field of the Grassland and Forages Division, National Institute of Animal Science, RDA from 2007 to 2008. Whole crop rice variety, "Nokyang", developed by the National Institute of Crop Science, was directly seeded with four different seeding rates (30, 60, 90 and 120 kg/ha). There were no significant differences (p<0.05) found in emergence date, heading date, greenish and disease resistance based on the seeding rates. Plant height increased at higher seeding rates but the tiller number per plant decreased (p<0.05). The dry matter (DM) content showed no significant difference based on seeding rates (p<0.05) while the yield of fresh and dry matter increased with incremented seeding rates (p<0.05). Acid detergent fiber (ADF) content increased with higher seeding rates, but the neutral detergent fiber (NDF) content did not show a similar tendency. The total digestible nutrient (TDN) content was lowest with 120 kg/ha seeding rate. The grain ratio decreased at higher seeding rates. In economic analysis, the plot seeded at a rate of 60 kg/ha showed the highest income increment. Although high seeding rates increased the DM yield, a seeding rate of 60 kg/ha is recommended as the proper seeding rate for direct-seeded whole crop rice.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.02a
• /
• pp.36-37
• /
• 2007

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.86-87
• /
• 2004

• Journal of Biosystems Engineering
• /
• v.21 no.3
• /
• pp.306-314
• /
• 1996

A seeder monitoring system was developed to solve the problems of mis-sowing and tube clogging in direct seeding machines, which have been one of the factors that reduce the performance of sowing operations. The system consisted of photo sensors, air nozzles, an air compressor, and a one-chip micro-computer based controller. The system was also equipped with the devices that perform the functions of self-checking and intermittent air injection for cleaning seed tubes. The performance of the system was tested in the laboratory and field. Using the well-cleaned rice seed, the average time for checking the mis-sowing was 1.37 seconds in the field and 1.2 seconds in the laboratory without any malfunction. Overall evaluation of the system indicated that the system can be utilized for seeding machines not only for paddies but beans and corns.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.439-441
• /
• 2012

A new wavelength tunable laser source based on a self-seeded F-P LD for a WDM-PON system has been proposed in this paper. The proposed laser source has a merit of the wavelength tunable range of approximately 20 nm with very simple setup. The measured minimum relative intensity noise(RIN) was approximately -124 dB/Hz and the possibility of 10 Gb/s external modulation was showed.

• Progress in Superconductivity
• /
• v.8 no.1
• /
• pp.8-15
• /
• 2006

The size of the superconducting domains and the critical current density inside these domains have to be enhanced for most of cryomagnetic applications of melt-textured YBCO bulks. To enlarge the size of the domains we studied the multi-seeding technique based on a well-established procedure for preparing high quality YBCO monoliths using self-made SmBCO seeds. The distance between the seeds was optimised as a result of the investigation of the effects of various seed distances on the characteristics of the grain boundary Junctions. The influences of a-b plane intersections and c-axis misalignments were researched. Thereby, a small range of tolerance of the misorientations between the seed crystals was found. Field mapping was applied to control the materials quality and the superconductor's grain structure was investigated using polarisation microscopy. YBCO function elements with iou. seeds in a line and an arrangement of making type (100)/(100) and (110)/(110) boundary junctions, respectively, were processed. The trapped field profile in both sample types shows single domain behaviour. To demonstrate the potential of the multi-seeding method a ring-shaped sample was processed by placing sixteen seeds in a way to make both (100)/(100) and (110)/(110) grain junctions at the same time. The results up to now are very promising to prepare large single domain melt-textured YBCO semi-finished products in complex shapes.

• Korean Journal of Organic Agriculture
• /
• v.15 no.1
• /
• pp.59-69
• /
• 2007

This experiment was conducted to study the spring productivity and feeding value of hairy vetch varieties. We also measured DM yield and feeding value by analyze CP and CF that authors made possible to calculate TDN and RFV. The results can be summarized as follows; Dry matter yield were increased earlier autumn seeding date and later cut in spring. Differences of dry matter yield in earlier cut in spring was high in order of Ostsaat, Welta, Vv4712, Penn-02, Common and Minnie. Crude protein(CP) yield was increased when earlier autumn seeding date and later cut in spring. Total digestible nutrient(TDN) yield of hairy vetch varieties was decreased when later autumn seeding date, and was increased when later cut in spring. TDN yield was highest in Ostsaat and Welta varieties had highest dry matter yield. Acid detergent fiber(ADF) content was decreased when later autumn seeding date and was increased when later cut in spring. Neutral detergent fiber(NDF) content was decreased when later autumn seeding date. Average values for relative feed value(RFV) were 157% and 132% in both cut. It shows that a high feed value in all of hairy vetch varieties. Above all, the results presented that the optimal seeding date for cultivating hairy vetch in the central region of Korea is between the 10th to the 20th of September. Because Ostsaat and Welta had significantly high dry matter yield we expected Ostsaat and Welta have a higher wintering ability.