• 한국정보통신학회논문지
• /
• 제26권3호
• /
• pp.436-442
• /
• 2022

본 논문은 수중 주파수 선택적 채널에서 주파수 다이버시티의 채널 선택 판정법에 따른 선택 합성법 (selective combining)의 성능을 평가하였다. 천해 수중 음향 채널은 경계면 반사와 수온 층에 따른 음파 굴절 등의 다양한 환경요인이 결합하여 복잡한 다중경로의 특성을 가진다. 특히, 다중경로에 의한 주파수 선택성 (frequency selectivity)는 통신 채널의 에너지 변동을 발생시키고, 이로 인해 SNR (Signal to Noise Ratio)가 감소하여 통신성능이 저하된다. 본 논문에서는 다중경로의 주파수 선택성에 따른 통신성능 확보를 위해 다수의 채널을 이용하는 주파수 다이버시티 기법을 적용하였다. 각 채널은 4-FSK (Frequency Shift Keying)과 선택 합성법을 적용하였으며, 선택 합성법의 복조 채널 선택 판정을 위해 신호의 최댓값, 평균값 그리고 심벌 비교 판정 (majority decision)을 적용하여 성능을 평가하였다.

• 제어로봇시스템학회논문지
• /
• 제17권2호
• /
• pp.116-124
• /
• 2011

A service robot can identify its own position relative to landmarks, the locations of which are known in advance. The main contribution of this research is that it gives various ways of making the self-localizing error smaller by referring to special landmarks which are developed as high gain reflection material and coded array associations. In this paper, the authors propose a set of indices to evaluate the accuracy of self-localizing methods using the selective reflection landmark and infrared projector, and the indices are derived from the sensitivity enhancement using 3D distortion calibration of camera. And then, the accurarcy of self-localizing a mobile robot with landmarks based on the indices is evaluated, and a rational way to minimize to reduce the computational cost of selecting the best self-localizing method. The simulation results show a high accuracy and a good performance.

• Journal of the Optical Society of Korea
• /
• 제12권4호
• /
• pp.337-345
• /
• 2008

This article presents the RSOA-based re-modulation schemes for practical application to the WDM-PON link. Emphasis is put on the three methods for reducing the residual downstream signal in the upstream transmission; the simplest one is to use the RSOA gain-saturation property, the second uses selective filtering of the adiabatic-chirped DFB-LD output spectrum, and the last uses a dynamic RSOA gain control by varying its driving current according to the incident binary signal. The reflection sensitivity in the proposed re-modulation link is also qualitatively presented in the cases of using two different types of seed light: coherent light from DFB-LD array and spectrum-sliced incoherent ASE light. We show experimental results of an error-free bidirectional gigabit transmission over 20 km at -30 dB reflection with the spectrum-sliced ASE seed light.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(4)
• /
• pp.31-34
• /
• 2000

In this paper, we proposed multispectral image compression method using CIP (classified inter-channel prediction) and SVQ (selective vector quantization) in wavelet domain. First, multispectral image is wavelet transformed and classified into one of three classes considering reflection characteristics of the subband with the lowest resolution. Then, for a reference channel which has the highest correlation with other channels, the variable VQ is performed in the classified intra-channel to remove spatial redundancy. For other channels, the CIP is performed to remove spectral redundancy. Finally, the prediction error is reduced by performing SVQ. Experiments are carried out on a multispectral image. The results show that the proposed method reduce the bit rate at higher reconstructed image quality and improve the compression efficiency compared to conventional method.

• 대한전자공학회논문지SD
• /
• 제38권7호
• /
• pp.486-492
• /
• 2001

본 논문에서는 중심파장과 대역폭을 자유롭게 조절할 수 있는 새로운 구조의 광 채널-선택형 필터를 제안하였다. 제안된 필터는 첩 광섬유 격자의 반사 스펙트럼을 조절하기 위해 사용되는 광섬유 신장기를 부착한 동일한 세 개의 첩 광섬유 격자를 사용하여 구성하였다 파장 다중화된 입력신호 중에서 임의의 채널을 선택할 수 있는 제안된 필터의 특성을 실험적으로 보였다.

• 한국군사과학기술학회지
• /
• 제18권4호
• /
• pp.369-375
• /
• 2015

In this paper, transparent circuit analog radar absorbing structure with angular stability for stealth aircraft canopy was proposed and designed. To obtain wideband electromagnetic absorption, optical transparency and smaller thickness, we proposed the novel FSS(Frequency Selective Surface) for X-band and implemented the resistive FSS and PEC(Perfect Electric Conductor) plane using ITO(Indium Thin Oxide) coating with optical transmissivity of 90 %. Reflection loss characteristics for different incident angles of both TE(Transverse Electric) and TM(Transverse Magnetic) polarizations are presented through simulations. We then fabricated the proposed structure to verify the simulation results. The comparisons between the simulation and measured results show good agreements. The results also show that the proposed radar absorbing structure can provide better frequency stability for different incidence angles and polarizations as well as optical transparency. We can apply this proposed structure to the canopy of stealth aircraft and other stealth applications for visible transparency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.273-275
• /
• 2005

Active thermography is being used since several years for remote non-destructive testing. It provides thermal images for remote detection and imaging of damages. Also, it is based on propagation and reflection of thermal waves which are launched from the surface into the inspected component by absorption of modulated radiation. For energy deposition, it use external heat sources (e.g., halogen lamp or convective heating) or internal heat generation (e.g., microwaves, eddy current, or elastic wave). Among the external heat sources, the ultrasound is generally used for energy deposition because of defect selective heating up. The heat source generating a thermal wave is provided by the defect itself due to the attenuation of amplitude modulated ultrasound. A defect causes locally enhanced losses and consequently selective heating up. Therefore amplitude modulation of the injected ultrasonic wave turns a defect into a thermal wave transmitter whose signal is detected at the surface by thermal infrared camera. This way ultrasound thermography(UT) allows for selective defect detection which enhances the probability of defect detection in the presence of complicated intact structures. In this paper the applicability of UT for fast defect detection is described. Examples are presented showing the detection of defects in PCB material. Measurements were performed on various kinds of typical defects in PCB materials (both Cu metal and non-metal epoxy). The obtained thermal image reveals area of defect in row of thick epoxy material and PCB.

• 대한전자공학회논문지TC
• /
• 제38권1호
• /
• pp.34-42
• /
• 2001

편파기 특성을 갖는 새로운 주파수 선택반사기의 새로운 주기적 배열 구조를 제시하였다. 배열 구조는 평면 유전체 슬랩의 양면에 도체 다이폴을 주기적으로 배열하고 윗면의 다이폴과 아래면의 다이폴은 서로 대략 $90^{\circ}$ 정도로 직교되며 유전체 두께는 유전율을 고려한 주파수 파장의 1/8정도이다. 산란 해석으로는 파수 영역 이미턴스방법과 모멘트 방법이 사용되었다. 제시한 새로운 주파수 선택반사기의 편파 변환 기능을 확인하기 위해 설계/제작하여 반사 손실과 투과 손실을 측정하였다. 측정 결과는 이론치와 매우 일치되었으며 반사시 선형 편파인 입사파가 원형 편파로 변환됨을 확인하였다.

• 폴리머
• /
• 제35권3호
• /
• pp.272-276
• /
• 2011

선택 반사를 보여주는 콜레스테릭 액정의(cholesteric liquid crystal; CLC) planar 배열이 유도되는 메카니즘을 CLC 셀의 선택 반사율과 FTIR $C{\equiv}N$ 피크 세기를 측정하여 조사하였다. 배향막을 사용한 경우보다는 planar 배열 유도가 완전하지는 않았지만 shear force를 이용하거나 또는 고분자 기판을 연신하여 배향막을 사용하지 않은 상태에서 planar 배열을 유도하였다. CLC의 planar 배열이 유도되는 메카니즘은 기판 표면에 접촉하는 액정분자들이 한 방향으로 늘어서면, 그 액정분자 위에 CLC의 나선 구조들이 기판에 수직으로 형성되며 planar 배열이 유도되는 것이다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.202-204
• /
• 2004

We study theoretically optical properties of thin layered stacked monochrome cholesteric liquid-crystal displays. Thin thickness of the layers (${\sim}1{\mu}m$) allows us appreciably to reduce driving voltage and use such displays in smart cards. Good selective reflection is achieved due to stacked structure. Dependence of the reflectivity of this type of displays on the quantity of the layers, their thickness, and liquid crystal birefringence is investigated.