• 한국환경과학회지
• /
• 제8권1호
• /
• pp.69-74
• /
• 1999

Soil properties which affect the retention of Pb(I) were investigated in the laboratory. It was determined, through selective removal, that organic matter and Fe-oxides are of lesser importance in influencing Pb retention than are soil clay minerals. The following trend : clays ＞ organic matter ＞ Fe-oxides represents the relative importance of each constituent in the adsorption of Pb by soils. The consistently greater Pb uptake by surface over subsurface samples was apparently due to differences in organic matter content, inasmuch as organic matter removal from both resulted in similar adsorption characteristics. All five soils stooled exhibited a pH-dependent trend of adsorption. The extent of Pb adsorption was least at low pH values(4~5), was maximum in the neutral pH range, and leveled off or diminished under more alkaline conditions. There was no strong correlation between Pb uptake and soil cation exchange capacity as routinely measured by the NH$_4$OAc method. A knowledge of clay mineralogy in conjunction with soil pH is suggested as being the most reliable guide to predicting Pb retention by soils.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 1999년도 추계학술대회 논문집
• /
• pp.209-210
• /
• 1999

오존 precursor인 NOx의 배출기준은 점차 강화되고 있고 NOx의 처리기술로는 선택적 촉매환원법 (Selective Catalytic Reduction; SCR)이 가장 널리 사용되고 있다. 국내 SCR 적용공정의 경우, 100% 수입에 의존하고 있어 support 촉매의 국산화가 절실히 요구되고있다. 이에 본 연구에서는 support로 섬유형 세라믹 필터를 사용하여 CuO, V$_2$O$_{5}$ 촉매를 담지시켜 NOx의 제거실험을 수행하였다.(중략)

• Bulletin of the Korean Chemical Society
• /
• 제16권9호
• /
• pp.805-808
• /
• 1995

Diacetone-D-glucose was converted into 5-azido-6-O-benzoyl-3-O-benzyl-5-deoxy-1,2-O-isopropylidene-α-D-glucofuranose. After removal of isopropylidene and benzoyl protecting groups, hydrogenation performed reduction of azide and subsequent cyclization by reductive amination to give 3-O-benzyl-1-deoxy nojirimycin in high yield. The second azide group was introduced on 2-carbon by selective substitution reaction, and reduction of azide to amino group gave titled compound.

• 공업화학
• /
• 제28권6호
• /
• pp.619-625
• /
• 2017

본 연구에서는 하이드로퍼옥시 라디칼 생성단계에서 반응 부산물로 생성되는 과산화수소를 정량하여 수산화라디칼의 생성 및 비스페놀 A (BPA)의 분해특성을 조사하였다. 라디칼 연쇄반응이 일어나지 않는 조건에서는 Criegee mechanism과 동일하게 오존에 의한 직접산화반응만이 BPA를 분해시키는 것으로 나타났다. 라디칼 연쇄반응이 일어나는 pH 6.5 및 9.5의 조건에서는 비선택적 산화반응이 일어나 수산화라디칼의 생성을 간접적으로 확인할 수 있었다. 투입된 촉매에 의한 BPA의 분해효율은 $O_3$/PAC ${\geq}$ $O_3/H_2O_2$ > $O_3$/high pH > $O_3$ alone 공정 순으로 나타났다. 오존/촉매공정들의 산화반응 동안에는 0.03~0.08 mM의 과산화수소가 지속적으로 측정되었다. $O_3$/high pH 공정의 경우, BPA가 반응시작 50 min 만에 완전히 분해되었지만, TOC (총유기탄소) 제거율은 29%로 산화반응 중 생성된 중간물질을 충분히 산화시키지 못하는 것으로 나타났다(선택적 산화반응). $O_3/H_2O_2$ 및 $O_3$/PAC 공정에서는 BPA가 반응시작 40 min 만에 완전히 분해되었으며, TOC 제거율은 각각 57% 및 66% 정도로 반응 중간체들을 산화(비선택적 산화반응)시키는 것으로 나타났다.

• 한국환경보건학회지
• /
• 제32권1호
• /
• pp.96-101
• /
• 2006

Chlorination inhibition on the organic removal activity of activated sludge microorganism was investigated in this study. It is well known that chlorination improves the settleability of filamentous bulking sludge through the selective impediment of filamentous microorganisms. However, it is based on the declination of effluent water quality after actual chlorination in dairy wastewater treatment plant. In case of the activated sludge which was exposed in the suggested concentration of chlorine $7.5\;mgCl_2/gVSS/day$ for the filamentous bulking control, decrease of organic uptake rate of $4.9\~24.0\%$, and dentrification rate of $24.8\~30.3\%$ ware shown in comparison to the control group which was not reacted with chlorine. As a result of comparing floc size of activated sludge microorganism, the average of floc diameter in the chlorine exposed group was $150\;{\mu}m$, which displays $25\%$ decrease compared with the control group.

• 에너지공학
• /
• 제13권2호
• /
• pp.133-143
• /
• 2004

Simultaneous removal technology of particulate/NOx/SOx/HCl using CuO/3Al$_2$O$_3$ㆍ2SiO$_2$catalyst impregnated ceramic candle filters is an advanced air pollution process and provides significantly to reduce hazardous gases emitted from coal-fired power plant. This process uses a high-temperature catalytic filter for integrating SOx and HCl reduction through injection an alkali sorbent (such as hydrated lime or sodium bicarbonate), NOx removal through ammonia injection and selective catalytic reduction (SCR), and particulate collection on the catalytic filter surface. The advantages of the process include : compact integration of the emission control technologies into a single component; easy handling of dry sorbent and by-product; and improved SCR catalytic life due to lowered SOx, HCl and particulate levels. CuO/3Al$_2$O$_3$ㆍ2SiO$_2$ catalyst impregnated ceramic candle filters showed a possibility of simultaneous treatment from results which have ascertained high removal efficiency at various combined gases conditions, and in pilot plant test for 3 months, NO conversion was showed 90% over.

• 공업화학
• /
• 제18권5호
• /
• pp.459-466
• /
• 2007

본 연구에서는 다양한 금속들이 담지된 H형 베타 제올라이트(BEA)를 황성분 함유 부취제 제거용 흡착제로 활용하였다. 단일 금속이 담지되거나 또는 두 종류의 금속이 복합적으로 함유된 여러 종류의 흡착제를 사용하여 연속적인 흡착층에서 THT와 TBM 부취제에 대한 개별적 혹은 경쟁적인 흡착 특성을 평가하였다. 순수한 H형 BEA 제올라이트는 TBM 화합물에 대하여 가장 높은 흡착능력을 나타내었으며, THT 부취제는 Fe, Pd 금속 및 ZnO를 함유한 HBEA상에서 더 많은 양으로 흡착 제거되었다. 복합금속함유 흡착제의 경우에는 Cu-Zn/HBEA와 Fe-Mo/HBEA가 TBM 부취제에 대하여 더 높은 흡착용량을 나타내었다.

• 한국레이저가공학회지
• /
• 제13권1호
• /
• pp.11-15
• /
• 2010

Indium tin oxide (ITO) provides high electrical conductivity and transparency in the visible and near IR (infrared) wavelengths. Thus, it is widely used as a transparent electrode for the fabrication of liquid crystal displays (LCDs) and organic light emitting diode displays (OLRDs), photovoltaic devices, and other optical applications. Lasers have been used for removing coating on polymer substrate for flexible display and electronic industry. In selective removal of ITO layer, laser wavelength, pulse energy, scan speed, and the repetition rate of pulses determine conditions, which are efficient for removal of ITO coating without affecting properties of the polymer substrate. ITO coating removal with a laser is more environmentally friendly than other conventional etching methods. In this paper, pattering of ITO film from polymer substrates is described. The Yb:KGW femtosecond laser processing system with a pulse duration of 250fs, a wavelength of 1030nm and a repetition rate of 100kHz was used for removing ITO coating in air. We can remove the ITO coating using a scanner system with various pulse energies and scan speeds. We observed that the amount of debris is minimal through an optical and a confocal microscope, and femtosecond laser pulses with 1030nm wavelength are effective to remove ITO coating without the polymer substrate ablation.

• Journal of Korean Neurosurgical Society
• /
• 제51권4호
• /
• pp.203-207
• /
• 2012

Objective: The purpose of this prospective study was to evaluate the efficacy and safety of screw fixation without bone fusion for unstable thoracolumbar and lumbar burst fracture. Methods: Nine patients younger than 40 years underwent screw fixation without bone fusion, following postural reduction using a soft roll at the involved vertebra, in cases of burst fracture. Their motor power was intact in spite of severe canal compromise. The surgical procedure included postural reduction for 3 days and screw fixations at one level above, one level below and at the fractured level itself. The patients underwent removal of implants 12 months after the initial operation, due to possibility of implant failure. Imaging and clinical findings, including canal encroachment, vertebral height, clinical outcome, and complications were analyzed. Results: Prior to surgery, the mean pain score (visual analogue scale) was 8.2, which decreased to 2.2 at 12 months after screw fixation. None of the patients complained of worsening of pain during 6 months after implant removal. All patients were graded as having excellent or good outcomes at 6 months after implant removal. The proportion of canal compromise at the fractured level improved from 55% to 35% at 12 months after surgery. The mean preoperative vertebral height loss was 45.3%, which improved to 20.6% at 6 months after implant removal. There were no neurological deficits related to neural injury. The improved vertebral height and canal compromise were maintained at 6 months after implant removal. Conclusion: Short segment pedicle screw fixation, including fractured level itself, without bone fusion following postural reduction can be an effective and safe operative technique in the management of selected young patients suffering from unstable burst fracture.

• 한국환경과학회지
• /
• 제1권1호
• /
• pp.53-68
• /
• 1992

In order to research the adsorption removal characteristics of trace organic by-products in disinfection of drinking water by biological activated carbon(BAC), water samples disinfect- ted with $Cl_2$, $O_3$ and $ClO_2$ after treatment by fluidized-bed system with water added with humic acid(10mg/L) were investigated the formation and the removal of trihalomethanes (THMs), and the trace organic by-products by gas chromatography(GC) II gas chromatography/mass selective detector(GC/MSD). Control was used by activated carbon(AC) and water added with humic acid(HA). The results were summarized as follow : The THMs removal effect of BAC by chlorination was in lower 90 % than that of control(HA), the sorts of oxidants formed by $Cl_2$ , $O_3$ and $ClO_2$ were that $O_3$ was very fewer than $Cl_2$ or $ClO_2$, and that $ClO_2$ was fewer than $Cl_2$. The trace organic by-products were esters and phthalates etc. Based on results above, it is concluded that BAC was appeared the more desirable adsorbtion-degradation removal characteristics than that of AC.