• Bulletin of the Korean Chemical Society
• /
• 제31권12호
• /
• pp.3539-3542
• /
• 2010

Selective mercuration at the 1,6-positions of 2-hydroxy derivative of Nile Red and its application towards $Hg^{2+}$-selective signaling was investigated. The 2-hydroxy Nile Red exhibited a selective UV-vis absorption and fluorescent signaling behavior towards $Hg^{2+}$ ions over common coexisting physiologically important metal ions in aqueous environment. $^1H$ NMR studies revealed that the mercuration was selectively effected at the 1,6-positions of 2-hydroxy Nile Red, which is quite different from that at the 6,8-positions for the parent Nile Red.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.682-685
• /
• 2014

In this paper, we presented the window applicable blind-type frequency selective surface to control the coverage area of wireless communication in secure building or conference room. The proposed frequency selective structure has the reconfigurable frequency range depends on its blind rotation angle. To verify the proposed structure, we fabricated the window blind-type frequency selective surface with four-legged loaded element and ring-type element as a unit cell and performed measurements of the transmission characteristics for different blind rotation angles to prove the feasibility. The measurement results show good agreements with the simulation results. One of the advantages is that the proposed structure does not need to have a bias circuit, so it is very easy to implement at low cost and also can be applied to any planar surface for wireless security applications.

• 센서학회지
• /
• 제33권1호
• /
• pp.48-55
• /
• 2024

Metal-oxide-based semiconductor gas sensors are widely used because of their advantages, such as high response and simple sensing mechanism. Recently, with the rapid progress in sensor networks, computing power, and microsystem technology, sensor applications are expanding to various fields, such as food quality control, environmental monitoring, healthcare, and artificial olfaction. Therefore, the development of highly selective gas sensors is crucial for practical applications. This article reviews the developments in novel sensor design consisting of sensing films and physical and chemical filters for highly selective gas sensing. Unlike conventional sensors, the sensor structures with filters can separate the sensing and catalytic reactions into independent processes, enabling selective and sensitive gas sensing. The main objectives of this study are directed at introducing the role of various filters in gas-sensing reactions and promising sensor applications. The highly selective gas sensors combined with a functional filter can open new pathways toward the advancement of high-performance gas sensors and electronic noses.

• Archives of Metallurgy and Materials
• /
• 제66권3호
• /
• pp.741-744
• /
• 2021

Selective deposition was performed on a micrometer trench pattern using a microcontact printing (μCP) process. Alkanethiols required for selective deposition were analyzed according to the carbon chain by linear sweep voltammetry (LSV). According to the LSV analysis, the effect of inhibiting Cu deposition depending on the length of the carbon chain was observed. During the Cu electrodeposition, the trench could be filled without voids by additives (PEG, SPS, JGB) in the plating solution. A μCP process suppressing the deposition of the sample was used for selective Cu electrodeposition. However, there was oxidation and instability of the sample and 1-hexadecanethiol in air. To overcome these problems, the μCP method was performed in a glove box to achieve effective inhibition.

• 한국태양에너지학회 논문집
• /
• 제32권5호
• /
• pp.102-107
• /
• 2012

Halogen lamp was applied to fabricate the selective emitter crystalline silicon solar cell. In selective emitter structure, the recombination of minority carriers is reduced with heavily doped emitter under metal grid, consequently improving the conversion efficiency. Laser selective emitter process which is recently used the most generally induces the damage on the silicon surface. However the lamp has enough heat to form heavily doped emitter layer by diffusing phosphorus from PSG without surface damage. In this work, we have studied to find the design and the suitable condition for halogen lamp such as power, time, temperature and figured out the possibility to fabricate the selective emitter silicon solar cell by lamp heating. The sheet resistance with $100{\Omega}/{\Box}$ was lower to $50{\Omega}/{\Box}$ after halogen lamp treatment. Heat transfer to lightly doped emitter region was blocked by using the shadow mask.

• 품질경영학회지
• /
• 제45권4호
• /
• pp.829-846
• /
• 2017

Purpose: This paper compares the effectiveness of typical selective assembly criteria and suggests the most promising one. Based on the result of a computer simulation, the key issues of selective assembly are examined and the best criterion is recommended from the effectiveness perspective. Methods: Using JAVA program, production of ten thousand units for each pair of components are simulated for selective assembly of the two types. And the number of mismatching and the fraction nonconforming for each criterion are determined. Results: The best match criterion appeared to be most promising from the perspectives of both mismatching and nonconforming problems. Its effectiveness appears to be also good even when the precision of one component is different from that of the other. Conclusion: For designing an optimal method for selective assembly, the best match criterion is recommendable as the base criterion.

• 대한임상검사과학회지
• /
• 제46권4호
• /
• pp.140-142
• /
• 2014

To evaluate the recovery rates to increase toxigenic C. difficile, the selective enrichment broth culture methods were compared with commonly used cytotoxin assays and toxigenic culture. First, the enrichment culture, using the selective medium broth for 2 to 5 days, was performed and then, toxigenic C. difficile was confirmed by C. difficile toxin gene-specific PCR after being cultured on C. difficile selective agar. The sensitivity of C. difficile from the enrichment culture (100%) was higher than that of C. difficile selective agar culture (93.8%), while positive predictive values (PPV) were low; 72.7% (16/22) and 88.2% (15/17). PPV of the enrichment culture are not high. Recently, combinations of C. difficile selective agar culture, C. difficile A & B assays, glutamate dehydrogenase, and nucleic acid amplification method are widely used. The enrichment culture was disadvantageous in PPV, turn-around time, and cost. So, what we performed is not considered as a common method of diagnosis of C. difficile-associated diarrhea.

• 한국태양에너지학회 논문집
• /
• 제35권4호
• /
• pp.9-15
• /
• 2015

Black cobalt solar selective coatings were prepared by using an electroplating method. The changes in the optical properties of the black cobalt selective coating due to thermal degradation were analyzed by using the Auger electron spectroscopy (AES) and spectrophotometer. The black cobalt selective coating was prepared on a copper substrate by using a synthesized electrolyte with $CoCl_2$ and KSCN at a current density of ${\sim}0.5A/dm^2$ for 45s ~ 60s. Its optical properties were a solar absorptance (${\alpha}$) of the order of 0.80 ~ 0.84 and a thermal emittance (${\epsilon}$) of 0.01. From the AES depth profile analysis of heated sample, thermal degradation of the black cobalt selective coating heated for 33 hours at temperature of $350^{\circ}C$ occurred primarily due to interdiffusion at interface of cobalt and copper substrate. This results were predictable that the ${\alpha}$ decreases due to the thermal oxidation and diffusion.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.278-281
• /
• 2009

Selective laser sintering(SLS), a kind of rapid prototyping technology, can provide a process to form many types of coatings. Coated layers by selective laser melting are highly influenced by substrate, powder and laser parameters such as laser power, scan rate, fill spacing and layer thickness. Therefore an attempt to fabricate Fe-Ni-Cr coating on AISI H13 tool steel has been performed by selective laser sintering. In this study, Fe-Ni-Cr coating was produced by experimental facilities consisting of a 200W fiber laser which can be focused to 0.08mm and atmospheric chamber which can control atmospheric pressure with Ar. With power increase or energy density decrease, line width was decreased and line surface quality was improved with energy density increase. Surface quality of coating layer was improved with fill spacing optimization or layer thickness decrease.

• Bulletin of the Korean Chemical Society
• /
• 제24권1호
• /
• pp.37-44
• /
• 2003

We examined the effect of polyether-type nonionic surfactants (Brij 35, Triton X-100, Tween 20 and Tween 80) on the potentiometric properties of sodium-, potassium- and calcium-selective membranes which are prepared with widely used ionophores and four kinds of polymer matrices [poly(vinyl chloride) (PVC), polyurethane (PU), PVC/PU blend, and silicone rubber (SR)]. It was found that the PVC-based membranes, which provide the best performance among all other matrix-based membranes in the absence of nonionic surfactants, exhibited larger change in their potentiometric properties when nonionic surfactants are added to the sample solution. On the other hand, the sodium-selective SR-based membrane with calix[4]arene, potassium-selective PVC/PU- or SR-based membrane with valinomycin, and the calcium-selective SR-based membrane with ETH 1001 provide almost identical analytical performance in the presence and absence of Tween 20 or Tween 80 surfactants. The origin of nonionic surfactants effect was also investigated by interpreting the experimental results obtained with various matrices and ionophores. The results suggest that the nonionic surfactant extracted into the membrane phase unselectively form complexes with the primary and interfering ions, resulting in increased background potential and lower binding ability for the ionophore. Such effects should result in deteriorated detection limits, reduced response slopes and lower selectivity for the primary ions.