• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.124-126
• /
• 2001

A reliable fault type identification (phase selection) plays a very important role in transmission line protection, particularly in Extra High Voltage(EHV) networks. The conventional fault type identification algorithm used the phase difference between positive and negative sequence current excluding load current. But, it is difficult to pick out only fault current since we can not know when a fault occurs and identify the fault type in weak-infeed conditions that dominate zero-sequence current in phase current. The proposed algorithm can identify the accurately fault type using the sum of unit vectors which are calculated by positive-sequence votage and negative-sequence voltage.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.4
• /
• pp.551-559
• /
• 2008

Increase in power consumption can cause a serious stability problem of an electric power system without construction of new power plants or transmission lines. Also, it can generate large power loss of the system. In costly and environmentally effective manner to avoid constructing the new infrastructures such as power plants and transmission lines, etc, the distributed generation(DG) has paid great attentions so far as a solution for the above problem. Selection of optimal location and size of the DG is the necessary process to maintain the stability and reliability of existing system effectively. However, the systematic and cardinal rule for this issue is still open question. In this paper, the method to determine optimal location of the DG is proposed by considering power loss when the DG is connected to an electric power grid. Also, optimal size of not only the corresponding single DG but also the multi-DGs is determined with the proposed systematic approach. The IEEE benchmark 30-bus test system is analyzed to evaluate the feasibility and effectiveness of the proposed method.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.1002-1008
• /
• 2014

This paper describes insulation design and its reliability evaluation of ${\pm}80kV$ HVDC XLPE cable. Recently, the construction of HVDC transmission system, which is combined overhead line with underground cable, has been completed. This system is installed with existing 154 kV AC transmission line on the same tower. In this paper, the lightning transient analysis is firstly reviewed for selection of basic impulse insulation level and nominal insulation thickness. Then the electrical performance tests including load cycle test and superimposed impulse test based on CIGRE TB 496 are performed to evaluate the reliability of newly designed HVDC cable. There is no breakdown for ${\pm}80kV$ HVDC XLPE cable during electrical performance test. Finally, this system is installed in Jeju island based on successful electrical performance test (Type test). After installation tests are also successfully completed.

• Journal of Wind Energy
• /
• v.13 no.1
• /
• pp.21-29
• /
• 2022

With the technological advances of offshore wind turbines, the share of power generated by offshore wind farms in power systems is increasing significantly. An export cable transmission system is necessary to connect offshore wind farms to power systems. The voltage rating and reactive power compensation methods of the export transmission system are very critical, as they can influence the power transmission capacity and CAPEX. With this in mind, this paper suggests an acceptable transmission voltage and reactive power compensation method for an export cable system connecting a 400[MW] offshore wind farm to a power system.

• ETRI Journal
• /
• v.40 no.2
• /
• pp.237-245
• /
• 2018

The Distributed Modulated Wideband Converter (DMWC) is a networking system developed from the Modulated Wideband Converter, which converts all sampling channels into sensing nodes with number variables to implement signal undersampling. When the number of sparse subbands changes, the number of nodes can be adjusted flexibly to improve the reconstruction rate. Owing to the different attenuations of distributed nodes in different locations, it is worthwhile to find out how to select the optimal sensing node as the sampling channel. This paper proposes the spectrum sensing of DMWC based on a Markov random field (MRF) to select the ideal node, which is compared to the image edge segmentation. The attenuation of the candidate nodes is estimated based on the attenuation of the neighboring nodes that have participated in the DMWC system. Theoretical analysis and numerical simulations show that neighboring attenuation plays an important role in determining the node selection, and selecting the node using MRF can avoid serious transmission attenuation. Furthermore, DMWC can greatly improve recovery performance by using a Markov random field compared with random selection.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5B
• /
• pp.327-337
• /
• 2012

There have been lots of researches on the optimal relay selection in relay-based systems. However, most researches have been focused on the maximization of transmission capacity with a constraint of sum power at both transmitter and relays. In Ad-hoc networks where relays have batteries of limited power, it is imperative to minimize the energy consumption while maintaining the required quality-of-service (QoS). In this paper, we propose an optimal relay selection strategy to minimize the relay power consumption while satisfying the required signal-to-noise ratio (SNR). Through intensive simulations, we show the proposed method is more effective in terms of energy consumption and guarantee lower transmission failure probability in multi-hop Ad-hoc environments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.9
• /
• pp.2590-2608
• /
• 2023

The high-altitude and mobility characteristics of unmanned aerial vehicles (UAVs) have made them a key element of new radio systems, particularly because they can exceed the limits of terrestrial networks. However, at high altitudes, UAVs can be significantly affected by intercell interference at a high line-of-sight probability. To mitigate this drawback, we propose an algorithm that selects the optimal beam to reduce interference and maximize transmission efficiency. The proposed algorithm comprises two steps: constructing a user-location-based fingerprint database according to the user types presented herein and cooperative beam selection. Simulations were conducted using cellular cooperative downlink systems for analyzing the performance of the proposed method, and the signal-to-interference-plus-noise cumulative distribution function and spectral efficiency cumulative distribution function were used as performance analysis indicators. Simulation results showed that the proposed algorithm could reduce the effect of interference and increase the performance of the desired signal. Moreover, the algorithm could efficiently reduce overheads and system cost by reducing the amount of resources required for information exchange.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.6
• /
• pp.762-766
• /
• 2013

Interest in Wireless Power Transmission (WPT) technology has been increasing worldwide recently. This trend is proved by commercialized products such as electric toothbrush, wireless razor, and wireless charger for mobile phone battery. Studies for enhancing the applicability of the technology have been continuously conducted. Currently the WPT technology is based on the technologies using microwave, inductively coupling, and magnetic resonance. In the meantime, development of the microwave-based WPT faces difficulty due to health hazards involved in the technology, and application of the WPT technology using inductively coupling is restricted by area due to the problem of transmission length. In comparison, the WPT technology using magnetic resonance draws attention in terms of efficiency and transmission length. In this study, the sending coil based on the WPT technology using magnetic resonance system was replaced with an HTS coil to enhance transmission efficiency. Since the HTS coil has a zero resistance, power transmission loss can be minimized. At the same time, size of the current density could be increased to 100 times or more than typical coils. In addition, through impedance matching of LC device, maximal resonance properties were induced and consequently, frequency selection quality characteristics or Q was enhanced. As a result, the WPT type using the HTS coil showed a longer transmission length and better transmission efficiency compared with the WPT type using typical coils.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7C
• /
• pp.907-914
• /
• 2004

In this paper, we propose an application of the receiver antenna switching to an conventional adaptive modulation system and derived the optimal antenna switching threshold of the system to maximize the average transmission bit rate and analyzed its performance. Also, we compare the performances of the presented scheme with those of an adaptive modulation using the antenna selection diversity and the one with a single antenna in terms of the average number of bits per symbol and the probability of no transmission. Performance comparison results show that the proposed system has an SNR gain of 1.4 dB over the adaptive modulation using a single antenna when the average number of bits per a symbol is two and yields an SNR gain of 6 dB for maintaining the probability of no transmission at the level of 0.1.

• Convergence Security Journal
• /
• v.12 no.3
• /
• pp.35-43
• /
• 2012

The explosive growth of Internet traffic cause by smart equipment such as smart phone has led to a dramatic increase in demand for data transmission capacity and network control architecture, which requires high transmission rates beyond the conventional transmission capability. Next generation networks are expected to be controlled by Generalized Multi-Protocol Label Switching(GMPLS) protocol suite and operating at multiple switching layers. In order to ensure the most efficient utilization of multilayer network resources, effective global provisioning that providing the network with the possibility of reacting in advance to traffic changes should be provided. In this paper, we proposes a new path selection scheme in multilayer optical networks based on the vertical PCE architecture and a different approach to efficiently exploit multiple PCE cooperation.