• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.2
• /
• pp.45-53
• /
• 2002

This paper presents an algorithm for the appropriate parameter selection of a power system stabilizer and power converters in two-area power systems with a series HVDC links. The method for PSS is one of the classical techniques by allocating properly poly-zero positions to fit as closely as desired the ideal phase lead and by changing the gain to produce a necessary damping torque. Proper parameter of power converters are obtained in order to have sufficient speed and stability margin to cope with changing reference values and disturbances based on the Root-locus technique. The small signal and transient stability studies using the PSS and power converters parameters obtained from these methods show that a natural oscillation frequency of the study case system is adequately damped. The simulation used in the paper was performed by the Power System Toolbox software program based on MATLAB.

• Journal of the Korea Society for Simulation
• /
• v.23 no.2
• /
• pp.65-72
• /
• 2014

Sensor nodes are easily compromised by attacker when which are divided in open environment. The attacker may inject false report and false vote attack through compromised sensor node. These attacks interrupt to transmission legitimate report or the energy of sensor node is exhausted. PVFS are proposed by Li and Wu for countermeasure in two attacks. The scheme use inefficiency to energy of sensor node as fixed report threshold and verification node. In this paper, our propose the next neighbor node selection scheme based on fuzzy logic system for energy improvement of PVFS. The parameter of fuzzy logic system are energy, hops, verification success count, CH select high the next neighbor node among neighbor nodes of two as deduction based on fuzzy logic system. In the experimental, our proposed scheme was improvement to energy of about 9% compare to PVFS.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.275-280
• /
• 2016

In this paper, we propose a novel relay selection technique which utilizes a priori decoding information at relays for buffer-aided successive relaying networks. In the conventional relaying schemes, a single relay pair is selected for receiving data from the source and transmitting data to the destination. In the proposed technique, however, all relays except the relay selected for transmitting data to the destination try to decode the received signal from the source, and they store the data if they succeed decoding. The proposed technique selects the relay such that it can succeed its own transmission and it maximizes the number of relays successfully decoding the data from the source at the same time. It is shown that the proposed relaying technique significantly outperforms the conventional buffer-aided relaying schemes in terms of outage probability through extensive computer simulations.

• Convergence Security Journal
• /
• v.13 no.6
• /
• pp.77-82
• /
• 2013

Looking at the recent value change of users and the usage pattern of network users, it is changing from simple web information, one-way information acquisition and data transmission to increase of usage of multimedia, increasing demand for security and customization, and increasing demands for free mobility. Due to this change of demand, the services which were provided individually, developed into a form which is merged, the network also seems to develop into the combined network from the individual network for individual service, and the communication network control technology which is the core technology is also rapidly developing.. This paper propose three path computation scheme that not only use the resources effectively but also to minimize the information transmissions between the multi-layers in a multi-domain environment. This paper also suggested that the optimum path choice be performed through diversification of the path selection using the information of various layers altogether in the multi-layer environment, compared with the established path selection method when the path was selected using the information of each layers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7B
• /
• pp.536-549
• /
• 2012

An ad hoc network consists of nodes with limited energy. Therefore, the data transmission can fail abruptly due to lack of energy of transmitting node. A previous work PAMP proposed to build multiple low-energy paths to support stable packet delivery exploiting the nodes with low energy. It has energy-reservation scheme and multi-path selection scheme for stationary wireless ad hoc networks. In this paper, we propose an extended version of PAMP by incorporating network coding opportunity in path selection process. The simulation results show that our proposed scheme shows better packet delivery ratio and lower energy consumption compared with PAMP and a legacy energy-aware multipath routing protocol REAR.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.519-536
• /
• 2007

In this paper, we combine the Hybrid-Automatic Repeat reQuest (HARQ) algorithm with joint Tx and Rx antenna selection based on the reliability of the individual antennas links. The cyclic redundancy check (CRC) is applied on the data before being encoded using the Turbo encoder. In the receiver the CRC is used to detect errors of each antenna stream and to decide whether a retransmission is required or not. The receiver feeds back the transmitter with the Tx antennas ordering and the acknowledgement of each antenna (ACK or NACK). If the number of ACK antennas is higher than the NACK antennas, then the retransmission takes place from the ACK antennas using the Chase Combining (CC). If the number of the NACK antennas is higher than the ACK antennas then the ACK antennas are used to retransmit the data streams using the CC algorithm and additional NACK antennas are used to retransmit the remaining streams using Incremental Redundancy (IR, i.e. the encoder rate is reduced). Furthermore, the HARQ is used with the I-BLAST (Iterative-BLAST) which grantees a high transmission rate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1811-1819
• /
• 2013

In this paper, we carried out a study on how to find an appropriate helper node for cooperative communications, the role of which is very import to enhance system throughput of wireless communication system. The busy tone cooperative MAC (BT-COMAC) protocol proposed in this paper is a new cooperative MAC protocol with a reactive helper node scheme and maximizes the benefits of existing schemes while making up for their shortcomings. We conducted performance evaluation of this new protocol using computer simulation experiment. System throughput in bps and channel access delay are utilized as performance measures. We used a random way point mobility model where every communication node moves independently one another, and slow fading channel where every communication node decided its transmission rate with received power basis. Numerical results show that the new MAC protocol enhances system throughput as much as 15% of the existing scheme.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.6
• /
• pp.40-50
• /
• 2002

In this paper, we present a GA(Genetic Algorithm) approach to select weighting matrices of an optimal LQ(Linear Quadratic) controller for SVC(Static VAR Compensator). A SVC, one of the FACTS(Flexible AC Transmission System), constructed by a FC(Fixed Capacitor) and a TCR(Thyristor Controlled Reactor), was designed and implemented to improve the damping of a synchronous generator, as well as to control the system voltage Also, a design of LQ controller depends on choosing weighting matrices. The selection of weighting matrices which is not a trivial solution is usually carried out by trial and error. We proposed an efficient method using GA of finding weighting matrices for optimal control law. Thus, we proved the usefulness of proposed method to improve the stability of single machine-infinite bus with SVC system by eigenvalues analysis and simulation.

• Journal of Advanced Navigation Technology
• /
• v.17 no.5
• /
• pp.497-505
• /
• 2013

In TETRA(TErrestrial Trunked RAdio) standard, TMO(Trunked Mode Operation) communicates with the UE through the base station and it has a higher priority than DMO(Direct Mode Operation) which communicates with UE directly for channel allocation. As a result, the UE needs an algorithm which restricts the frequency allocation by TMO so that DMO can have a successful communication within the network. However, the TETRA DMO standard does not consider this issue. In this paper, we propose an active DMO channel selection algorithm which allocates a channel based on some additional information such as channel usage state of TMO and channel utilization of DMO. The experimental results show that the proposed algorithm outperforms existing DMO channel allocation scheme in terms of the transmission efficiency.

• Journal of Information Processing Systems
• /
• v.13 no.5
• /
• pp.1229-1242
• /
• 2017

In this paper, an interference aware distributed multi-channel MAC (IDMMAC) protocol is proposed for wireless sensor and actor networks (WSANs). The WSAN consists of a huge number of sensors and ample amount of actors. Hence, in the IDMMAC protocol a lightweight channel selection mechanism is proposed to enhance the sensor's lifetime. The IDMMAC protocol divides the beacon interval into two phases (i.e., the ad-hoc traffic indication message (ATIM) window phase and data transmission phase). When a sensor wants to transmit event information to the actor, it negotiates the maximum packet reception ratio (PRR) and the capacity channel in the ATIM window with its 1-hop sensors. The channel negotiation takes place via a control channel. To improve the packet delivery ratio of the IDMMAC protocol, each actor selects a backup cluster head (BCH) from its cluster members. The BCH is elected based on its residual energy and node degree. The BCH selection phase takes place whenever an actor wants to perform actions in the event area or it leaves the cluster to help a neighbor actor. Furthermore, an interference and throughput aware multi-channel MAC protocol is also proposed for actor-actor coordination. An actor selects a minimum interference and maximum throughput channel among the available channels to communicate with the destination actor. The performance of the proposed IDMMAC protocol is analyzed using standard network parameters, such as packet delivery ratio, end-to-end delay, and energy dissipation, in the network. The obtained simulation results indicate that the IDMMAC protocol performs well compared to the existing MAC protocols.