• Environmental and Resource Economics Review
• /
• v.33 no.3
• /
• pp.203-239
• /
• 2024

The introduction of a regional differential electricity rate system is being discussed, and the LMP (Locational Marginal Price) method is mentioned as a promising alternative. Under this background, this study analyzed a mathematical model and suggests that the LMP method produces results that maximize social welfare. The analysis was conducted separately for long-term decision-making where transmission capacity can be expanded, and for short-term decision-making in which transmission capacity is given. The analysis for short-term decision-making was conducted for peak load situations where capacity is insufficient and for non-load situations with spare capacity. The results of the analysis suggested that the price to maximize social welfare is equal to the marginal power generation cost by region, and the difference in marginal cost by region reflects the value lost due to transmission loss and compensation for transmission network investment. In addition, if the transmission capacity is less than the optimal capacity, the compensation for transmission network investment exceeds the incremental cost, providing an incentive to invest in the transmission network. If the transmission capacity exceeds the optimal capacity, the compensation for transmission network investment becomes lower than incremental cost or zero and the investment is not recovered, suppressing the investment in transmission networks. The results are the same as the LMP method suggests, and this means that this method maximizes social welfare and provides an optimal transmission network investment signal. The above analysis results contribute to understanding the characteristics of LMP. In addition, this study discussed what changes are needed in the electricity market when introducing the LMP concept.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3A
• /
• pp.325-333
• /
• 2000

The proposed RPSS(Reference Picture Segment Selection) mode is the RPS mode in picture segment of the ISD mode. The RPS mode has the weakness that it has to change the whole reference picture even if transmission error occurs only in the small part of picture. If the RPS mode is applied only to an error-occurred part and a conventional coding scheme is applied to an error-free part, the higher coding efficiency can be obtained. Simulation results show that there is the optimal number of segment which provides that best performance with given environment such as the BER(Bit Error Rate) of wireless channels, the characteristics of imput sequence, what kind of RPSS mode is used, etc. To apply the channel-adoptive RPSS mode later, the scheme which can change the number of segment without INTRA refresh and spatial error propagation is proposed in this paper.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.11a
• /
• pp.422-427
• /
• 2008

The major cause of Concrete Spalling at high temperatures can be divided into the Vapor Pressure Rising, caused by the increase in free water temperature within the concrete, and Pore Pressure Rising induced by the vapor moving into dense pores within the concrete. Although the occurrence of spalling within concrete caused by these pressure increases can be assessed experimentally, a close examination into Mechanistic influence against various spalling factors shall be carried out first by using Mathematical Modeling and Theoretical Equations. The Spalling Prospect Process by theoretical mechanism is expedited in order of the following; selection of heating condition (fire strength and flame heating direction), a selection of constituent elements, an analysis of heat transmission, an analysis of moisture movement, distribution of water content, an analysis of pore/vapor pressure, and assessment of spalling occurrence.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.5
• /
• pp.338-344
• /
• 2014

As the role of information collection becomes increasingly important in the enormous data environment, there is growing demand for more intelligent information technologies for managing complex data. On the other hand, it is difficult to find a solution because of the data complexity and big scaled amount. Accordingly, there is a need for a special intelligent knowledge base frame that can be operated by itself flexibly. In this paper, by adopting switching function for signal transmission in the synapse of the human brain, I/E selective activation based knowledge reconfiguring mechanism is proposed for building more intelligent information management system. In particular, knowledge network design, a special knowledge node structure, Type definition, I/E gauge definition and I/E matching scheme are provided. Using these concepts, the proposed system makes the functions of activation by I/E Gauge, selection and reconfiguration. In a more efficient manner, the routing and reasoning process was performed based on the knowledge reconfiguration network. In the experiments, the process of selection by I/E matching, knowledge reconfiguration and routing & reasoning results are described.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.467-472
• /
• 2008

One of the maindisadvantages of Orthogonal Frequency Division Multiplexing (OFDM) is the Peak to Average Power Ratio (PAPR) problem. To reduce PAPR and improve the error performance of the OFDM signal over a fading channel, an OFDM system combining an Adaptive Symbol Selection Scheme (ASSS) and channel estimation can be used. Because of the side information of ASSS, however, the data rate decreases in the conventional ASSS OFDM system. In this letter, to overcome this impairment, we propose a technique to transmit side information by using pilot tones, and demonstrate that the proposed technique can give reasonable bit error rate (BER) performance.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.219-220
• /
• 2008

We proposes an adaptive relay selection scheme for a regenerative (OFDMA) relay network with fairness constrains. The proposed scheme selects the best relays out of a set of potential relays to maximize system capacity. Among these selected relays, subcarriers are reallocated to satisfy fairness constraints as well as to minimize the decrease of the system capacity. The simulation results show that the proposed scheme achieves significant performance improvement over direct transmission and opportunistic relaying with OFDM (OR-OFDM).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.3
• /
• pp.460-469
• /
• 2012

The WiMedia Alliance has specified a Distributed Medium Access Control (D-MAC) protocol based on UWB for high speed wireless home networks and WPANs. In this paper, we propose a novel cooperative communication protocol adaptive to current UWB link transmission rate. The proposed cooperative communication protocol has compatibility with current WiMedia D-MAC and Wireless USB standard and is executed at each device according to a Relay Node Selection (RNS) criterion.

• Journal of Communications and Networks
• /
• v.16 no.5
• /
• pp.502-511
• /
• 2014

In this paper, we evaluate performance of a hybrid decode-amplify-forward relaying protocol in underlay cognitive radio. In the proposed protocol, a secondary relay which is chosen by partial relay selection method helps a transmission between a secondary source and a secondary destination. In particular, if the chosen relay decodes the secondary source's signal successfully, it will forward the decoded signal to the secondary destination. Otherwise, it will amplify the signal received from the secondary source and will forward the amplified signal to the secondary destination. We evaluate the performance of our scheme via theory and simulation. Results show that the proposed protocol outperforms the amplify-and-forward and decode-and-forward protocols in terms of outage probability.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2008.10b
• /
• pp.634-642
• /
• 2008

Radio wave is the valuable resources in $21^{st}$ century. It will be widely used in various applications such as DMB, USN, telematics, and home network as well as mobile and wireless communications. Cognitive Radio technology is devised to maximize the utilization of radio resources by sensing near-by spectrum and dynamic and allocating free resources dynamically and adaptively. Wireless links for the secondary user need to be frequently switched to idle frequencies during the transmission of multimedia data in the cognitive radio based system. This may cause delay and information loss, and QoS degradations occur inevitably. The efficient frequency allocation scheme is necessary to support the seamless multimedia service to the secondary user while maintaining QoS of the primary user. This paper suggests a frequency selection scheme which considers other parameters such as cell load, data rate, and available bandwidth than just received signal strength during the frequency selection process. The performance of our proposed scheme is analyzed by simulation.

• Journal of Communications and Networks
• /
• v.14 no.6
• /
• pp.703-709
• /
• 2012

In this paper, we propose a hybrid decode-amplify-forward incremental cooperative diversity protocol using SNR-based relay selection. In the proposed protocol, whenever destination unsuccessfully receives the source's signal, one of relays that exploit hybrid decode-amplify-forward technique is chosen to retransmit the signal. We derive approximate closed-form expressions of outage probability and average channel capacity. Monte-Carlo simulations are presented to verify the theoretical results and compare the performance of the proposed protocol with the direct transmission protocol and conventional incremental relaying protocols.