• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.489-489
• /
• 2006

• 전기의세계
• /
• v.17 no.3
• /
• pp.57-61
• /
• 1968

Limitation to Peterson coil grounded operation of 154KV system began to develop with the growth of system as to voltage and system cost. Therefore, 154KV system is going to be grounded solidly from November this year. This study shows the insulation coordination of solidly ground system, such as the selection of a suitable lightening arrester, determination of transmission line insulation and Basic Insulation Level of station equipment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.2
• /
• pp.59-63
• /
• 2009

The UTP cable has been widely used, recently it is being developed for use in the UHF frequency band. One important characteristic of the UTP cable is NEXT. This research is to develop a pitch selection technique for an UTP cable which leads to a satisfactory NEXT. The transmission line model involving mutual inductances and capacitances between line pairs is used, and the simulation was carried out for frequencies from 1 MHz to 600 MHz. With respect to the worst margin of the NEXT for a Cat. 6 cable the simulation and measurement results show a good agreement.

• ETRI Journal
• /
• v.35 no.1
• /
• pp.120-130
• /
• 2013

This paper presents an analysis of resource assignment for multihop communications in millimeter-wave (mm-wave) wireless personal area networks. The purpose of this paper is to figure out the effect of using directional antennas and relaying devices (DEVs) in communications. The analysis is performed based on a grouping algorithm, categorization of the flows, and the relaying DEV selection policy. Three schemes are compared: direct and relaying concurrent transmission (DRCT), direct concurrent transmission (DCT), and direct nonconcurrent transmission (DNCT). Numerical results show that DRCT is better than DCT and DCT is better than DNCT for any antenna beamwidths under the proposed algorithm and policy. The results also show that using relaying DEVs increases the throughput up to 30% and that there is an optimal beamwidth that maximizes spatial reuse and depends on parameters such as the number of flows in the networks. This analysis can provide guidelines for improving the performance of mm-wave band communications with relaying DEVs.

• Journal of Korea Multimedia Society
• /
• v.19 no.3
• /
• pp.620-625
• /
• 2016

In this paper, we offer the secrecy outage probability of the amplify-and-forward (AF) transmission, which consists of one source, one destination, one relay, and one passive eavesdropper. Particularly, we consider that the relay is equipped with multiple antennas while other terminals is utilized with single antenna and apply diversity techniques (for both the reception and the transmission) at the relay to achieve gains in a secrecy outage performance. Additionally, we analyze the exact secrecy outage probability of the proposed systems in a one-integral form. Finally, some numerical examples are given to verify our provided analytical results for different system conditions.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.38-39
• /
• 2006

KEPCO is executing a project in Cambodia consisting of two components, "Power Development Master Plan and Institutional Strengthening" and "Greater Mekong Sub-region (GMS) Power Project Preparation" upon request by the government of the Ministry of Industry, Mines and Energy of Cambodia, contracted on $29^{th}$ September 2005. This paper includes a basic design and review of economical efficiency for constructing the two (2) cross border 115 kV transmission lines, which run from the border of Vietnam and Laos to Cambodia, and four (4) 115kV substations. The main contents of the paper include the process of design and results of a review of line route selection, tower and hardware design regarding transmission line design, as well as the type of substation, and arrangement and specifications of equipment with expects to substation design. Also, long-term demand forecasting, and an economic analysis of the project area are included.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.4
• /
• pp.25-33
• /
• 2008

The performance of power constrained cooperative multi-relay system with/without opportunistic transmission is considered in Rayleigh fading. The three power allocation methods are considered to maximize the system performance when the total network power is limited. It is analyzed that the opportunistic power allocation strategy has the best performance enhancement compared to the other power allocation strategies. The opportunistic relays increases with the total network power, which induce the higher diversity order of the opportunistic cooperative diversity, consequently improves the end-to-end outage probability.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.6
• /
• pp.89-94
• /
• 2009

In wireless mesh network, nodes are communicates as like as Ad-Hoc. Nodes of Wireless Mesh Network must have a good QoS and a algorithm for good path. ETX, ETT and WCETT are proposed Wireless Mesh Network routing methods. But these have Interference problem. This paper propose ETI(Expected Transmission Interference) based on ETT for good path selection. This paper show the algorithm and improved performance in simulation than other algorithms.

• Journal of Korea Multimedia Society
• /
• v.21 no.4
• /
• pp.493-498
• /
• 2018

In this paper, we provide the performance analyses of a dual-hop amplify-and-forward(AF) relay transmission composed of asymmetric radio-frequence(RF) and free-space optical(FSO) links. In the mixed RF/FSO system, a relay is equipped with two receive antennas for RF signals and one additional transmit antenna for FSO signals. In order to improve a performance of RF link, a switch-and-stay (SSC) diversity technique is applied at the relay which can provide a proper link performance with a low complexity. Specifically, we offer the performance analyses of the proposed system in terms of outage probability and secrecy outage probability. In numerical examples, we compare the system performances with no diversity and selection combining systems and verify our analytical results via computer-based Monte-Carlo simulations.

• ETRI Journal
• /
• v.29 no.1
• /
• pp.116-119
• /
• 2007

In this letter, we design a collision resolution protocol for optical burst switching ring networks to avoid burst collision. We define the offset time condition for no burst transmission collision and manage the free time list of nodes for no burst reception collision. In order to improve the throughput, we use a fiber delay line, void-filling, and void-compression. This protocol does not require any additional procedures for bandwidth reservation such as centralized assignment of bandwidth, lightpath setup of WDM ring networks, or token capturing for the burst transmission. The simulation results show that the proposed protocol can achieve high throughput while saving 70% of wavelengths when compared to round robin with random selection, round robin with persistent, and round robin with non-persistent with only destination delay.