• 제목/요약/키워드: selection operator

검색결과 163건 처리시간 0.017초

야산 기계화 개간공법에 관한 연구 -레이크 도저의 적정 이빨 간격의 선택과 발배근작업능률 시험(제1보)- (Research on Mechanized Upland Reclamation Works An Experiment for the Selection of Optimum Teeth Interval and the Analysis of Efficiency of Stumping and Root-Clearing Methods by Rake Dozer. (Report 1))

  • 류한열;정하우박승우
    • 한국농공학회지
    • /
    • 제17권3호
    • /
    • pp.3860-3871
    • /
    • 1975
  • This experiment was carried out to establish the mechanized methods in stumping and root-clearing, which were the most important works in the reclamation of sloping uplands. The determination of optimum teeth interval of rake blades and its operation methods to reduce the quantity of transported topsoil during the works, are the aims of this investigation. A newly designed rake blade, whose net teeth intervals could be regulated by three stages as 15cm, 25cm, and 35cm, was manufactured to attach to the bulldozer of 13ton. The experiments were carried out at Kilsang-Myon, Kwangwha-Gun, from Aug. 9 to Aug. 23, 1975. For each interval, 36 test plots of 50${\times}$10mn in size, which were regulated under three levels of land slopes of 10, 20, and 30% and two different tree stand density of high or medium values, were randomly chosen and arranged by two-replicated split-split plot design. Each stump classified by its diameter was stumped and cleared by the rake dozer to be related between diameter and stumping time. The results obtained in this experiment can be summarized as follows: 1. Stumping times for the diameters ranging from 6 to 18cm of stumps are almost the same and they are not varied by the difference of teeth intervals of rake dozer. 2. By back-ward stumping method, the number of stumps which can be stumped per hour ranges almost from 100 to 170, showing significant difference with respect to the teeth intervals. The working area is sharply varied with not only the stand density of stumps but the teeth intervals. 3. Optimum stumping distance for each teeth interval of rake dozer to minimize the quantity of transported topsoil are varied with such the rates as it is 15m or 20m for 15cm of teeth interval, but 25m for 25cm or 35cm, respectively. The clearing distance could be chosen almost double as long as the operating distance. 4. The working areas per hour of the simultaneous stumping and clearing methods are no significant difference among the various treatments of working conditions, but they are affected by the operating techniques. However, the influencing factors of the working conditions as classified before and the working directions are ranged from 10 to 15 per cent of total working area, respectively. 5. The residual rates of stumps which are not stumped by the rake dozer in each test plot are generally reduced as the teeth interval gets narrower, but there are no significant difference among them. The mean residual rates average to be about 4% for the simultaneous stumping and clearing method. The back-ward stumping method are recommended to be supervised and directed by more than one man, to show the operator where the stumps are located. 6. The results according to the stumping and clearing methods are summarized as Table IV-2. And the selection of working methods is recommended to follow as shown in Fig. IV-9 with respect to the stand density of the field. 7. Generally speaking, the narrower the teeth interval, the better become the working results, but the more the quantity of transported topsoil is increased. Therefore, it is recommended that the teeth interval should be reduced from the present distance of more than 30cm to 25cm or 15cm, by developing suitable working methods through more field works and experiments.

  • PDF

도심형 수요응답 교통서비스의 통행목적별 만족도 영향요인 비교연구: 세종특별자치시 셔클(Shucle)을 중심으로 (A Comparative Study on Factors Affecting Satisfaction by Travel Purpose for Urban Demand Response Transport Service: Focusing on Sejong Shucle)

  • 김원철;한우진;박준태
    • 한국ITS학회 논문지
    • /
    • 제23권2호
    • /
    • pp.132-141
    • /
    • 2024
  • 본 연구에서는 수요응답 교통서비스를 이용한 통행목적을 통근·통학과 쇼핑·여가로 구분하고 통행목적별 만족도와 영향변수의 차이를 비교한다. 세종특별자치시 '셔클(Shucle)' 이용자를 대상으로 실시한 만족도 설문조사 자료를 활용하고, 다중선형모델의 과적합(overfitting) 문제점을 최소화하기 위해 LASSO 회귀분석을 적용한다. 분석 결과, 수요응답 교통서비스 도입으로 기존 대중교통 사각지역의 공백이 해소되고, 자가용 이용 감소로 저탄소 및 대중교통 활성화 정책을 유인할 수 있으며, 간헐적인 통행행태를 갖는 행위자(예컨대 고령자, 주부 등)에게 최적의 이동 서비스를 제공할 수 있는 가능성이 확인되었다. 또한, 차량 호출 후 대기시간, 탑승 후 이동시간, 앱이용 편리성, 예상 출/도착 시간의 정시성, 승·하차 지점의 위치 요인은 통근·통학과 쇼핑·여가 통행 시 수요응답 교통서비스 만족도에 긍정적인 영향을 미치는 공통요인으로 나타났다. 한편, 타 교통수단과의 환승은 통근·통학의 경우에만 만족도에 영향을 미치고 쇼핑·여가의 경우는 미치지 않는 것으로 나타났다. 수요응답 교통서비스를 활성화하기 위해서는 분석된 5개의 영향요인에 대한 고려뿐만 아니라 통근·통학과 쇼핑·여가의 차별화 요인 즉, 통근·통학의 경우 행위자는 시간가치를 중요하게 여기므로 총 통행시간을 줄이기 위한 타교통수단과의 환승 편의를 도모하고, 쇼핑·여가 통행의 경우 이용자가 승·하차 지점의 위치를 쉽고 편하게 지정하여 이용할 수 있는 이용편의 조성방안의 고려가 필요할 것으로 사료된다.

Radiomics를 이용한 1 cm 이상의 갑상선 유두암의 초음파 영상 분석: 림프절 전이 예측을 위한 잠재적인 바이오마커 (Radiomics Analysis of Gray-Scale Ultrasonographic Images of Papillary Thyroid Carcinoma > 1 cm: Potential Biomarker for the Prediction of Lymph Node Metastasis)

  • 정현정;한경화;이은정;윤정현;박영진;이민아;조은;곽진영
    • 대한영상의학회지
    • /
    • 제84권1호
    • /
    • pp.185-196
    • /
    • 2023
  • 목적 갑상선 유두암 환자에서 림프절 전이를 예측할 수 있는 잠재적인 바이오마커를 개발하기 위해 초음파 영상에 대한 radiomics를 조사하는 것이다. 대상과 방법 2013년 8월부터 2014년 5월까지 431명의 환자가 연구에 포함되었고 통계 소프트웨어를 사용하여 훈련 및 검증 세트로 구분되었다. 총 730개의 radiomics 특징이 자동으로 추출되었다. 훈련 데이터 세트에서 가장 예측 가능한 특징을 선택하기 위해 최소 절대 수축 및 선택 연산자가 사용되었다. 결과 Radiomics 점수는 림프절 전이와 관련이 있었다(p < 0.001). 림프절 전이는 젊은 연령(p = 0.007) 및 더 큰 종양 크기(p = 0.007)와 같은 다른 임상 변수와도 관련이 있었다. 수신자 조작 특성 곡선 하 면적 결과 값은 훈련 세트의 경우 0.687 (95% 신뢰 구간: 0.616-0.759), 검증 세트의 경우 0.650 (95% 신뢰 구간: 0.575-0.726)이었다. 결론 본 연구 결과는 초음파 영상 기반의 radiomics가 papillary thyroid carcinoma 환자에서 경부 림프절 전이를 예측하고 바이오마커로 작용할 가능성을 보여주었다.