• 제목/요약/키워드: select properties

검색결과 471건 처리시간 0.024초

혼용자재 특성이 양송이 폐상배지를 이용한 퇴비제조에 미치는 영향 (Influence on Composting of Waste Mushroom Bed from Agaricus bisporus by using Mixed Organic Materials)

  • 경기천;이희덕;정영필;장갑열;윤민호
    • 한국토양비료학회지
    • /
    • 제43권3호
    • /
    • pp.335-340
    • /
    • 2010
  • 양송이 폐상배지의 퇴비 활용성을 검토하고자 유기물원 2종류, 질소원 3종류를 각각 혼용하여 퇴비화과정을 거쳐 퇴비의 이화학적 특성 및 미생물상의 변화를 조사하였다. 처리별 자재 혼용비율은 퇴비의 기준인 유기물 함량 25%이상 함유되도록 조절하였다. 유기물원은 톱밥이 볏짚보다 높았으며, 질소원은 계분 >> 돈분 > 우분 순 340 경기천 이희덕 정영필 장갑열 윤민호으로 높았다. 발효기간 동안 폐배지+돈분+볏짚 처리구는 빠른 온도 변화를 보였으며, 폐배지3:톱밥9:돈분1 (MSP) 처리구는 발효 중간까지 온도상승이 지속적으로 유지되는 결과를 보였다. 또한 pH는 초기에 8.5~9.0으로 높게 유지되다가 종료시점에 7.5 수준으로 떨어지는 것으로 나타났다. 발효 후 유기물함량 변화는 볏짚 처리구는 19~21% 수준으로 감소되었으나, 톱밥을 처리할 경우 25~27% 수준을 유지하였고, 그 중 폐배지3:톱밥9:계분1 (MSF)에서 유기물 26.2% 와, 질소 0.68%로 가장 높았다. 탄소원으로 볏짚을 사용한 경우 퇴비제조 후 부피가 절반으로 줄어든 반면 톱밥은 30% 정도밖에 줄어들지 않았다. 퇴비제조 후 미생물상 변화는 탄소원의 경우 볏짚 처리구가 톱밥 처리구보다 전반적으로 개체수가 많았으며, 특히 호기성세균, Gram 음성균, Bacillus 등이 많았고, 질소원은 계분 > 돈분 > 우분 순으로 미생물 개체수가 많았다. 생균수는 퇴비 발효 전 보다 $1{\times}10^1{\sim}1{\times}10^2\;cfu\;g^{-1}$ 수준으로 증가하는 경향을 보였다. 따라서 양송이폐상배지를 이용한 퇴비 제조 시 폐배지3:톱밥9:계분1 (MSF 3:9:1 v/v/v) 처리에서 높은 유기물과 질소원으로 양질의 퇴비가 되었으며 퇴비발효기간은 50~60일이었다.

수치지형해석(數値地形解析)에 의한 온대중부림(溫帶中部林)의 적지적수도(適地適樹圖) 작성(作成) (Mapping of the Righteous Tree Selection for a Given Site Using Digital Terrain Analysis on a Central Temperate Forest)

  • 강영호;정진현;김영걸;박재욱
    • 한국산림과학회지
    • /
    • 제86권2호
    • /
    • pp.241-250
    • /
    • 1997
  • 본 연구(硏究)는 수치(數値) 지형(地形) 해석법(解析法)에 의거 조림추천수종(造林推薦樹種)이 적지적소(適地適所)에 배치(配置)되도록 도면화(圖面化)하는 것을 목표(目標)로 현지(現地) 분포수종(分布樹種) 및 조림수종(造林樹種) 특성조사(特性調査)을 실시(實施)하여 알고리즘값을 설정(設定)하였다. 토양(土壤)은 토양조사(土壤調査)에 의거(依據) 토양도(土壤圖)를 작성(作成) 수치화(數値化)하여 사용(使用)하였고 평균표고(平均標高), 경사(傾斜), 방위(方位), 국소지형(局所地形)은 각각의 격자단위별(格子單位) 표고(標高)값을 가지고 계산식(計算式)을 적용(適用)하여 수치도(數値圖)를 작성(作成)하였다. 얻어진 결과(結果)를 요약(要約)하면 다음과 같다. 1. 개인별(個人用) 컴퓨터를 이용(利用)한 지형해석(地形解析) 및 수치도(數値圖) 중첩법(重疊法)에 의거 전북(全北) 무주군(茂朱郡) 일부지역(一部地域)(2,500ha)을 대상(對象)으로 토양(土壤) 및 임상조건(林相條件), 지형요인(地形要因)에 따라 분류(分類)할 수 있는 적지적수선정기법(適地適樹選定技法)을 개발(開發)하였다. 2. 연구(硏究) 대상지역(對象地域)에는 주로 갈색산림토양(褐色山林土壤)이 출현(出現)하고 소나무외 29개 수종(樹種)이 분포(分布)하였으며, 입지환경(立地環境) 및 토양조건(土壤條件)에 따라 수종별(樹種別)로 지위차이(地位差異)가 나타났다. 3. 본 연구(硏究)를 수행(遂行)하기 위하여 작성(作成)한 기본프로그램 (DTM, BAS)의 정확성을 알아보기 위하여 지형수치도(地形數値圖)의 평균표고(平均標高) 방위(方位)값과 현지(現地) 실측(實測)한 값사이의 오차율(誤差率)을 검증(檢證)한 결과(結果) 평균표고(平均標高) 및 방위(方位)값에서 모두 허용오차(許容誤差) 범위내(範圍內)인 5%미만(未滿)으로 나타나 개발(開發)된 프로그램의 유효성(有效性)이 입증(立證)되었다. 4. 적지적수도(適地適樹圖) 작성결과(作成結果) 가장 많은 면적(面積)을 차지하는 군(群)은 제 2군(R, $B_1$토양형(土壤型))으로 전체의 46%를 차지했으며, 산림(山林) 이외지역(以外地域)(L)이 23%, 제 6군($B_2$토양형(土壤型))은 13%로 나타났고, 제 5군은 7%, 제 4군은 5%, 기타 6%의 순으로 나타났다. 5. 조림수종군별(造林樹種群別) 관리방안(管理方案)은 제 1군의 비산림지역(非山林地域)을 제외(除外)하고 토양(土壤) 및 지형조건(地形條件)을 기준(基準)으로 하여 4개(個) 유형(類型)으로 분류(分類) 시행(提示)하였다.

  • PDF

표고 수집균주의 재배적 특성 및 갈변과의 상관관계 (Cultural characteristics on collected strains of Lentinula edodes and correlation with mycelial browning)

  • 김영호;전창성;박수철;유창현;성재모;공원식
    • 한국버섯학회지
    • /
    • 제9권4호
    • /
    • pp.145-154
    • /
    • 2011
  • 표고 수집균주의 특성을 파악하고 재배적 특성과 갈변과의 상관관계를 알아봄으로써 표고 톱밥재배를 안정적으로 실시하고 재배기간을 단축시킬 수 있는 방법을 모색하고자 하였다. 한천배지에서의 균사생장은 균주와 배지에 따라 다르게 나타났으며, MEA와 PDA에서는 큰 차이가 없었다. 균사생장 최적온도는 $20{\sim}25^{\circ}C$ 이었다. 200lux의 광조건에서 갈변패턴에 따라 균주를 분류할 수 있었다. 갈변기간은 한천배지에서는 30-40일, 톱밥봉지에서는 70~100일이 소요되었다. 자실체 특성을 관찰한 결과 300g 이상 수량을 보이는 균주가 12균주였으며, 자실체 수량 및 재배특성을 고려할 때 ASI 3046이 가장 우수한 것으로 판단되었다. 균사생장과 갈변 간의 유의성은 인정되지 않았으며, PDA배지와 톱밥 균사생장과는 유의성이 인정되었으며, 한천배지에서 갈변되는 기간과 톱밥배지에서 갈변되는 기간과의 관계는 고도 유의 상관을 나타내었다. 따라서 균이 갈변되는 성질은 영양분의 차이보다는 균의 고유한 성질이라고 생각되며 갈변이 빠른 균주를 선발하기 위해서는 한천배지를 이용하여 균을 선발할 수 있을 것으로 생각된다. 앞으로 톱밥재배에 필수적인 갈변에 대한 이해를 실제 재배에 접목시켜 톱밥재배 기간을 단축시키거나 생산성을 비약적으로 증대시키는 등 톱밥재배를 활성화시킨다면 품질이 높은 생표고를 낮은 가격으로 생산해 낼 수 있으리라 생각된다.

서비스 종업원의 표면행위가 반생산적 과업행동에 미치는 효과에 관한 연구: 감정소모의 매개효과를 중심으로 (The Effects of Service Employee's Surface Acting on Counterproductive Work Behavior: The Mediating Roles of Emotional Exhaustion)

  • 강성호;최종학;이지애;허원무
    • 유통과학연구
    • /
    • 제14권2호
    • /
    • pp.73-82
    • /
    • 2016
  • Purpose - Counterproductive work behavior(CWB) was typically categorized according to the behavior whether it targets other people(i.e., interpersonal CWB: I-CWB). Employing organizations(i.e., organizational CWB: O-CWB) has emerged as major concerns among researchers, managers, and the general public. An abundance of researches has informed us about the understanding for the antecedents of CWB, whereas little is known about the antecedents of CWB directed distribution service in employee's emotional labor. Therefore, the purpose of this research is to propose a research model in which surface acting enhances emotional exhaustion as an emotional labor strategy, which eventually increases counterproductive work behavior(including I-CWM and O-CWB). Research design, data, and methodology - This empirical research data were gathered from the samples of full time frontline hotel employees(including front office, call center, food/beverage, concierge, and room service) in South Korea. Six hotels were selected ranged from four to five stars, including privately owned and joint-venture properties. A convenience sampling method was used to select hotels. Full time frontline hotel employees from the six hotels were surveyed using a self-administered instrument for data collection. With the strong support of hotel managers, a total of 300 questionnaires were distributed, and 252 responses were collected indicating a response rate of 84.0%. In the process of working with the 252 samples, structural equation modeling is employed to test research hypotheses(H1: The relationship between surface acting and Interpersonal counterproductive work behavior(I-CWB) is mediated by emotional exhaustion, H2: The relationship between surface acting and organizational counterproductive work behavior(O-CWB) is mediated by emotional exhaustion). SPSS 18.0 and M-Plus 7.31 software were used for the data analysis. Descriptive statistics were used to assess the distribution of the employee profiles and correlations between factors. M-Plus 7.31 software was used to test the model fit, validity, and reliability of the factors, significance of the relationship between factors, and the effects of factors in the model. Results - To test our mediation hypotheses, we used an analytical strategy suggested by Preacher & Hayes (2008) and Shrout & Bolger (2002). This mediation approach directly tests the indirect effect between the predictor and the criterion variables through the mediator via a bootstrapping procedure. Thus, it addresses some weaknesses associated with the Sobel test. We found that surface acting was positively related to emotional exhaustion. Furthermore, emotional exhaustion was a significant predictor from the two kinds of counterproductive work behavior. In addition, surface acting was not significantly associated with the two kinds of counterproductive work behavior. These results indicated that the surface acting by frontline hotel employees was associated with higher emotional exhaustion, which is related with higher interpersonal counterproductive work behavior(I-CWB) and organizational counterproductive work behavior(O-CWB). In sum, we confirmed that the positive relationship between surface acting and the two kinds of counterproductive work behavior was fully mediated by emotional exhaustion. Conclusions - The current research broadens the conceptual work and empirical studies in counterproductive work behavior literature by representing a fundamental mechanism that how surface acting affects counterproductive work behavior.

평행식 진동탄환 암거 천공기의 연구 (IV)(V)-실기 설계 제작 및 보장실험-Development of Balanced-Type Oscillating Mole Drainer(IV)(V)

  • 김용환;이승규;서상용
    • Journal of Biosystems Engineering
    • /
    • 제2권1호
    • /
    • pp.7-24
    • /
    • 1977
  • This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.

  • PDF

가금에서 분리된 유산균의 생리적 특성 및 급여효과

  • 김상호
    • 한국가금학회:학술대회논문집
    • /
    • 한국가금학회 2002년도 가을 학술발표논문집
    • /
    • pp.64-84
    • /
    • 2002
  • 본 연구는 가금맹장에서 유래된 유산균의 생균제적 가치를 구명하고자 실시하였다. 시험 I에서는 가금 맹장 유산균의 특성을 구명하고자 산란계 및 육계 맹장 유산균을 각각 12주와 11주를 분리하여 내산성, 내담즙산성, 효소분비력, 항병원성 및 항생제 감수성을 조사하였다. 분리된 균주들은 PH 3부터 점차적으로 사멸하는 균주와 일정하게 유지되는 균주로 구분되었으며, PH 4에서 모든 유산균의 성장은 양호하였다. 본 실험에서 분리된 대부분의 유산균은 bile salt에 의해 성장이 저해되는 것으로 나타났는데 몇몇 균주는 저항성이 높게 나타났다. 선발된 맹장유산균과 다른 균주와 비교하였는데, 가금 맹장유래 유산균은 다른 유산균과 Bacillus에 비하여 효소분비성이 우수한 것으로 나타났으며 효소별 분비능력에서 amylase와 lipase 활성은 강한 것으로 나타났지만 cellulase와 protease의 활성은 약한 것으로 나타났다. 항병성 조사에서 유산균 배양액은 균종에 관계없이 병원성 E. coli에 대하여 억제성이 높았으며 억제요인으로는 유기산 분비에 의한 pH 저하가 주 요인으로 나타났다. 그러나 병원성 Salmonella에 대해서는 유산균 배양액의 억제성이 낮았다. 유산균은 페니실린 계통의 항생제에 의하여 생존율은 저하되었지만 이외의 다른 항생제는 유산균의 생존에 미치는 영향이 없었다. 본 실험에서 선발된 유산균은 각각 target animal에 급여하여 host specific effect를 구명하기 위하여 사양실험을 실행하였다. 시험II는 유산균의 급여가 육계의 생산성, 영양소 이용성, 장내미생물, 계사내 환경, 혈청 콜레스테롤, 응모의 발달에 미치는 영향 및 육계에 대한 유산균의 적정 급여수준을 구명하고자 시행하였다. 육계 초생추에 육계ㆍ산란계의 맹장에서 유래한 Lactobacillus crispatus avibrol(LCB), L. reuteri avibro2(LRB) L. crispatus avihen1(LCH), L. vaginalis avihen2(LVH) 각각을 사료 g당 $10^4$/cfu 및 $10^{7}$ cfu의 수준으로 급여하였다. 유산균의 급여에 의한 육계의 체중은 대조구에 비하여 증체량은 50~100g이 높았다. 사료섭취량 및 사료요구율은 대조구와 모든 유산균 급여구간에 유의적인 차이가 없었다. 영양소 이용율에서 건물소화율은 유산균 급여구가 대조구에 비하여 증가하는 경향을 보였으며, 단백질, Ca 이용율도 유산균 급여구가 대조구에 비하여 전체적으로 증가하는 경향을 나타냈다. 유산균 급여구에서 조지방, 조회분 소화율은 대조구에 비하여 개선되는 경향을 보였지만 인의 이용율은 처리구간에 일정한 경향이 없었다. 유산균 종류별 영양소 이용율은 LCH 급여구가 모든 일반성분 및 Ca, p의 이용율이 가장 높았다(P〈0.05). 회장내 유산균 수는 시험 전기간 현저하게 증가하였으며 (P〈0.05), 맹장에서는 5주령에 처리구간에 차이가 없었다. Yeast는 회장에서 1주령까지는 장내에 완전히 정착하지 못하는 것으로 생각되며, 맹장 및 3주령 이후의 회장에서는 대부분의 유산균 급여구에서 Yeast의 수가 증가하였다(P〈0.05).

  • PDF

국내 육성 콩 품종의 논 재배에 따른 생육반응과 수량성 (Growth and Yields of Korean Soybean Cultivars in Drained-Paddy Field)

  • 김용욱;조준형
    • 한국작물학회지
    • /
    • 제50권3호
    • /
    • pp.161-169
    • /
    • 2005
  • 논 재배에 적합한 콩 품종을 선발코자 황금 콩 등 국내 육성 37개 콩 품종을 공시하여 품종간 생육반응과 수량성의 차이를 조사한 결과는 다음과 같다. 1.토양수분함량이 높은 논에서의 콩 재배 시 생육단계별 콩 품종별 주요형질의 생육반응은 매우 다양한데, 특징적인 생육반응은 초기생육이 지연되거나 지하부의 발달이 늦은 반면 지상부가 과번무하여 T/R율이 높아지는 경향이 있으며, 품종간 수량성에 있어서도 팔도콩이 134kg/10a 그리고 도레미콩이385kg/10a 차이가 매우 컸다. 2. 생육초기인 V5 stage와 개화성기인 R2 stage의 엽면적은 지상부 및 지하부 건물중과 각각 고도의 상관관계 $(r=0.46^{**}\~0.91^{**})$를 보였으며, T/R율의 경우 V5 stage에는 지하부 건물중과 부의 상관관계$(r=-0.37^*)$를 보인 반면 R2 stage에는 엽면적$(r=0.46^{**})$과 지상부 건물중$(r=0.65^{**})$과 유의성 있는 상관 관계가 성립되었다. 3. 수량성은 100립중과 상관관계를 보인 반면 등숙율 포함한 V5 및 R2 stage에서 조사된 다른 형질과는 유의성 있는 상관을 보이지 않았다. 4.농업적 주요형질의 생육반응을 기초로 군집분석 한 결과 공시품종들은 크게 3개 군으로 구분되는데,동일 군의 품종들은 생육습성 등 유전적 유사성은 높았으나 수량성은 다양하였다. 5. Group 1에는 새올콩등 9품종이 포함되는데, 생육초기부터 개화성기까지의 생육이 늦은 반면, T/R율이 낮고 등숙이 양호하여 평균 257kg/10a의 수량성을 보인다. Croup 2는 팔도콩 등 12품종이 포함되는데, 지상부의 생육이 과번무하여 T/R율이 높고 등숙이 불량하여, 평균 230kg/10a의 수량성을 보였다. Croup 3에는 진품 콩 등 16품종이 포함되는데, 대부분 중만생종이며, $V5\~R2$ stage의 생육이 왕성하고 T/R율은 비교적 낮고, 등숙울 또한 비교적 높아 평균 수량성이 270kg/10a로 가장 높았다. 6. 본 연구결과를 토대로 Group 3에 속하는 품종 또는 $301\~385kg/10a$의 높은 수량성을 보이는 신팔달콩2호, 소호콩, 도레미콩, 금강콩, 부광콩, 다장콩 및 검정콩2호 등의 품종을 선별하여 재배한다면 논의 적정 경지면적 유지에 의한 국내 쌀 수급안정 및 안정적인 콩 자급율 향상을 기대할 수 있을 것이다.

폐광산 주변의 목본 식생 현황 및 오염 토양에 대한 목본 종자의 발아 특성 (Vegetation Distribution Near Abandoned Metalliferous Mines and Seed Germination Properties of Woody Plants by the Contaminated Soils)

  • 서경원;김래현;구진우;노남진;경지현;김정규;손요환
    • 한국환경농학회지
    • /
    • 제25권1호
    • /
    • pp.47-57
    • /
    • 2006
  • 폐광산 주변 오염지역의 식생복원에 이용할 목본 수종을 선발하기 위하여 본 연구를 수행하였다. 먼저, 폐광산 지역의 식생을 조사하고, 현지 오염 토양에 자생하는 목본식물의 중금속 오염도를 분석한 결과, 대부분의 지역에서 소나무, 아까시나무, 싸리, 오리나무 등이 넓은 면적을 차지하고 있었고, 다른 수종에 비해 생육 상태도 양호하였다. 이 수종들은 체내 중금속 농도도 높게 나타났으며, 특히 뿌리 부위에서 높은 값을 보였다. 이들 네 목본 수종을 대상으로 비오염토양과 가학광산(Cd, Cu, Pb, Zn 오염지) 및 금정광산(As 오염지)토양의 배합 비율별 종자 발아 특성을 연구한 결과, 발아율은 온실과 incubator 실험에서 모두 소나무 > 싸리 > 아까시나무 > 오리나무 순으로 나타났다. Incubator에서는 소나무와 오리나무의 발아율이 비오염 토양에서 가장 높게 나타났다. 소나무의 발아율은 가학광산 토양의 경우 100%처리 수준에서 높게 나타난 반면, 금정광산 토양의 경우 광산 토양의 비율이 증가함에 따라 감소하는 현상을 보였다. 온실에서 소나무의 발아율은 가학광산 토양의 경우 40% 처리 수준에서 가장 낮은 반면, 금정광산 토양의 경우 20% 처리 수준에서 발아율이 가장 낮았고 광산 토양의 비율이 증가할수록 소나무의 발아율이 증가하였다. 유묘 생장의 경우, 금정광산 토양 20% 수준을 제외한 두 광산 토양의 모든 처리구에서 지상부 생장은 싸리가 가장 높았으며, 지하부 생장은 아까시나무가 가장 높았다. 본 연구 결과는 중금속 오염현장에 실제로 적용될 Eco-tree 선발을 위한 기초 자료로 사용될 수 있을 것으로 기대된다.펄펄 끓인 후 쌀을 넣어 조리하였고, 잡곡류는 낱알이 큰 것을 부수거나 물에 침지하였으며, 견과류, 서류, 구근류, 과일 등도 잘게 썰어 사용하였다. 치료식으로 한약재료는 물에 우리거나 삶았고, 육류는 푹삶아 육수에 밥을 하였다. 비빔밥은 되게 밥을 조리하여 나물과 밥을 일부 비빈후에 웃기로 얹었다. (1) 쌀밥은 물을 먼저 끓이다 쌀을 넣고 펄펄 끓여 된밥으로 조리하였다. 육수에 쌀을 넣고 밥을 조리하기도 하였으며, 찰밥은 제사밥으로 시루에 조리하였다. (2) 잡곡밥은 메밀, 보리, 율무 등을 사용하여 물에 곡식알이 큰것(콩)부터 미리 담가 삶거나 잘게 부숴 조리하였다. 팥등은 미리 삶거나 두쪽으로 조개 솥밑바닥에 깔았으며 대추나 밤은 세쪽으로 자른 후 물을 많이 붓고 기타재료를 섞어 밥을 하였다. 3) 국밥등은 말린국화 황국을 우려내 쌀을 넣고 밥을 조리하였으며, 국밥은 고기류와 뼈등을 푹삶아 육수에 밥을 말아 고기와 나물로 웃기를 얹었다. 굴밥등은 밥이 반쯤 익으면 재료를 미리 볶거나 씻어 넣고 조리하였다. 4) 비빔밥은 먼저 쌀로 밥을 되직하게 조리한 후 나물을 미리 밥과 슬쩍 비비다가 밥위에 나물과 웃기, 고명을 얹고 고추가루를 뿌렸다. 5) 남촉잎 등은 삶아 냉각후 쌀로 밥을 조리하였으며, 남촉줄기와 잎은 찧어 즙내 쌀로 밥을 조리하였다. 복숭아 연근 고구마는 잘게 썰어 쌀이 반쯤 익으면 함께 넣고 도라지는 물에 우려 푹 삶았고, 감자, 송이 등은 잘게 썰어 쌀과 함께 밥을 조리하였다. 4. 약선 음식조리방법 약선음식의 재료는 평상시 식생활에 사용되고 있던 식품들의 기능성분과 약이성을 이용하여 만성적인 질병과 급성적인 복통 설사

토양선충분리(土壤線蟲分離)를 위(爲)한 여과지(濾過紙) 선발(選拔)에 관(關)하여 (Selection of Tissue Papers for Nematode Extraction from Soil in Combined Screening-funnel Method)

  • 조명래;최영연
    • 한국응용곤충학회지
    • /
    • 제24권1호
    • /
    • pp.39-44
    • /
    • 1985
  • 토양(土壤) 중(中)의 식물기주선충(植物寄株線蟲)을 체법(法)과 깔대기법(法)을 병용(竝用)하여 분리(分離)할 때 사용(使用)되는 선충분리용(線蟲分離用) 여과지(據過紙)를 선발(選拔)키 위(爲)하여 시판(市販)되고 있는 화장지(化粧紙) 중(中)에서 국내(國內) 5개(個) 회사(會社) 10개(個) 제품(製品)과 화란에서 선충분리용(線蟲分離用)으로 제작(製作)된 Cotton-wool Nematode Filter와 비교(比較)하여 분리율(分離率)을 조사(調査)하였고 온도(溫度) 및 시간(時間) 별(別)로 선충분리율(線蟲分離率)을 조사(調査)하였던 바 다음과 같은 결과(結果)를 얻었기에 보고(報告)한다. 1. 시판(市販) 화장지(化粧紙)의 선충분리율(線蟲分離率)은 2매(枚) 사용(使用) 시(時)는 Champ Sapphire, Crown Hankie, Scotties Bird 등(等) 3종(種)은 토양(土壤) 200ml당(當) 선충분리수(線蟲分離數)가 453, 419, 312마리로 Nematode Filter의 227마리에 비(比)하여 분리율(分離率)이 월등(越等)히 높았으며 1% 수준(水準)에서 유의성(有意性)이 인정(認定)되었으나 Clarity가 E급(級)으로 흐려서 검경(檢鏡)이 곤란(困難)하였다. 그리고 Monaliza Finely Soft와 Crown Table Napkin은 선충분리수(線蟲分離數)가 175, 193마리로 Nematode Filter에 비(比)하여 약간 낮았으나 Clarity는 C급(級)으로 나타났고 Kleenex New Softness는 240마리로 분리율(分離率)은 높게 나타났으나 Clarity가 C급(級)이며 강도(强度)가 약(弱)하였다. 4매(枚) 사용(使用) 시(時)는 Champ Sapphire, Crown Hankie, Scotties Bird. Beau Clean Silvia, Kleenex New Softness, Monaliza Finely Soft등(等) 6종(種)이 비교적(比較的) 분리율(分離率)이 높았다. 그 중(中)에서 Champ Sapphire는 219마리로 Nematode Filter와 분리율(分離率)이 비슷하였으나 Clarity가 C급(級)이며 강도(强度)가 약(弱)하여 잘 찢어지므로 사용(使用)이 불편(不便)하였고 Crown Hankie는 198마리로 Nematode Filter에 비(比)하여 분리율(分離率)이 다소(多少) 낮게 나타났으나 Clarity가 B급(級)이며 강도(强度)도 강(强)하게 나타났으므로 국내(國內)에 시판(市販) 중(中)인 화장지(化粧紙) 중(中)에서 선충분리용(線蟲分離用) 여과지(濾過紙)로는 Crown Hankie 4매(枚) 사용(使用)이 가장 적합(適合)한 것으로 사료(思料)된다. 2. 토성(土性)에 따른 선충분리율(線蟲分離率)은 Loamy sand, Sandy loam, Clay loam 공(共)히 Champ Sapphire가 가장 분리율(分離率)이 높았고 Crown Hankie, Beau Clean Silvia 등(等)의 순(順)이었다. 3. 향수(香水) 처리(處理)되지 않은 화장지(化粧紙)는 향수(香水) 처리(處理)된 화장지(化粧紙)에 비(比)하여 Kleenex New Softness는 53% 더 높은 분리율(分離率)을 보였고 Monaliza Finely Soft는 23% 더 높은 분리율을 나타냈으므로 선충분리용(線蟲分離用)으로는 향수처리(香水處理)되지 않은 것이 더 좋은 것으로 사료(思料)된다. 4. 온도별(溫度別) 선충분리율(線蟲分離率)을 $15^{\circ},\;25^{\circ}\;and\;35^{\circ}C$에서 조사(調査)한 결과(結果) 전체적(全體的)으로 $35^{\circ}C$에서 분리율(分離率)이 가장 높게 나타났다. 5. 시간경과(時間經過)에 따른 선충분리율(線蟲分離率)은 12시간(時間) 후(後)가 35.3 %이고 24시간(時間) 후(後)가 40.3%로 가장 높게 나다났다가 36시간(時間) 이후(以後)부터는 분리율(分離率)이 급격(急激)히 감소(減少)되었다. 그러므로 선충분리(線蟲分離) 시간(時間)은 $12{\sim}24$시간(時間)이 가장 적합(適合)한 것으로 사료(思料)된다.

  • PDF

신기술 사용 과정에 관한 비교 사례 연구: 기술 전유 과정의 근거이론적 접근 (A Comparative Case Study on the Adaptation Process of Advanced Information Technology: A Grounded Theory Approach for the Appropriation Process)

  • 최희재;이준기
    • Asia pacific journal of information systems
    • /
    • 제19권3호
    • /
    • pp.99-124
    • /
    • 2009
  • Many firms in Korea have adopted and used advanced information technology in an effort to boost efficiency. The process of adapting to the new technology, at the same time, can vary from one firm to another. As such, this research focuses on several relevant factors, especially the roles of social interaction as a key variable that influences the technology adaptation process and the outcomes. Thus far, how a firm goes through the adaptation process to the new technology has not been yet fully explored. Previous studies on changes undergone by a firm or an organization due to information technology have been pursued from various theoretical points of views, evolved from technological and institutional views to an integrated social technology views. The technology adaptation process has been understood to be something that evolves over time and has been regarded as cycles between misalignments and alignments, gradually approaching the stable aligned state. The adaptation process of the new technology was defined as "appropriation" process according to Poole and DeSanctis (1994). They suggested that this process is not automatically determined by the technology design itself. Rather, people actively select how technology structures should be used; accordingly, adoption practices vary. But concepts of the appropriation process in these studies are not accurate while suggested propositions are not clear enough to apply in practice. Furthermore, these studies do not substantially suggest which factors are changed during the appropriation process and what should be done to bring about effective outcomes. Therefore, research objectives of this study lie in finding causes for the difference in ways in which advanced information technology has been used and adopted among organizations. The study also aims to explore how a firm's interaction with social as well as technological factors affects differently in resulting organizational changes. Detail objectives of this study are as follows. First, this paper primarily focuses on the appropriation process of advanced information technology in the long run, and we look into reasons for the diverse types of the usage. Second, this study is to categorize each phases in the appropriation process and make clear what changes occur and how they are evolved during each phase. Third, this study is to suggest the guidelines to determine which strategies are needed in an individual, group and organizational level. For this, a substantially grounded theory that can be applied to organizational practice has been developed from a longitudinal comparative case study. For these objectives, the technology appropriation process was explored based on Structuration Theory by Giddens (1984), Orlikoski and Robey (1991) and Adaptive Structuration Theory by Poole and DeSanctis (1994), which are examples of social technology views on organizational change by technology. Data have been obtained from interviews, observations of medical treatment task, and questionnaires administered to group members who use the technology. Data coding was executed in three steps following the grounded theory approach. First of all, concepts and categories were developed from interviews and observation data in open coding. Next, in axial coding, we related categories to subcategorize along the lines of their properties and dimensions through the paradigm model. Finally, the grounded theory about the appropriation process was developed through the conditional/consequential matrix in selective coding. In this study eight hypotheses about the adaptation process have been clearly articulated. Also, we found that the appropriation process involves through three phases, namely, "direct appropriation," "cooperate with related structures," and "interpret and make judgments." The higher phases of appropriation move, the more users represent various types of instrumental use and attitude. Moreover, the previous structures like "knowledge and experience," "belief that other members know and accept the use of technology," "horizontal communication," and "embodiment of opinion collection process" are evolved to higher degrees in their dimensions of property. Furthermore, users continuously create new spirits and structures, while removing some of the previous ones at the same time. Thus, from longitudinal view, faithful and unfaithful appropriation methods appear recursively, but gradually faithful appropriation takes over the other. In other words, the concept of spirits and structures has been changed in the adaptation process over time for the purpose of alignment between the task and other structures. These findings call for a revised or extended model of structural adaptation in IS (Information Systems) literature now that the vague adaptation process in previous studies has been clarified through the in-depth qualitative study, identifying each phrase with accuracy. In addition, based on these results some guidelines can be set up to help determine which strategies are needed in an individual, group, and organizational level for the purpose of effective technology appropriation. In practice, managers can focus on the changes of spirits and elevation of the structural dimension to achieve effective technology use.