• Korean Journal of Agricultural Science
• /
• v.13 no.2
• /
• pp.243-254
• /
• 1986

This study was conducted to select the appropriate types of drop cone for measuring soil hardness and to determine the cone index for the actual field on which rice will be transplanted. One type of drop cone was selected from the results of indoor tests and the selected drop cone was tested at the 56fields of the five different districts in Korea. The results of this study were summarized as follows; 1. Cone type D shows a significant penetrating depth variation comparing the other types of cone on the indoor tests. 2. Six types of cone were tested on the similar state of the actual puddling field. The penetrating depth variation was not significant among the cones but cone type F seemed to be suitable to evaluate the state of puddling because cone type F showed the least repeat variations during the tests. 3. The actual field test from 56 fields showed that the penetrating depth was approximately 11.0-14.4cm on the puddling day and it was 9.2-13.7cm on the transplanting day of which one to three days after puddling. 4. The above results show that the selected drop cone could be used to formulate the state of puddling.

• Korean Journal of Agricultural Science
• /
• v.22 no.2
• /
• pp.156-162
• /
• 1995

This study was carried out to select the useful mutants among 20 lines treated with mutagen, gamma ray. These materials were treated with 15, 20, 25 and 30Krads, respectively and sowed at experimental field of College of Agriculture on 27th May, 1995. Items surveyed were germination rate and loss of chlorophyll at seedling stages, abnormal reproductive organs, discordance of flowering times and stem and ear height at ripening stages. The germination rate of lines treated with 15 Krad was different. The germination rate of the IK1, IK2 and Sinki lines were high, while the IK3, A632 and FR140 lines were very low. At same dose level, the germination rate of both IK1/H26 and Puyo synthetic variety were different; the germination rate of the IK1/H26 was high as above 70% at all treatments, while that of the Puyo synthetic variety was very poor at above 20 Krad. Generally stem adn ear height of the IK1/H26 were gradually decreased as the dose of mutagen increased, but there was no difference in stem and ear height of the IK1/H26 when this line was treated with 20Krad. The stem and ear height of lines treated with 15 Krad were shown to be decreased than those of check with non-treatment. The number of tiller of tillering lines were not greatly affected by ${\gamma}$-ray treatment.

• Food Science and Preservation
• /
• v.24 no.5
• /
• pp.707-713
• /
• 2017

The objective of this study was to select yogurt starter from Korean traditional fermented foods. The 2 strains (KM24, KM32) among 50 strains of isolated lactic acid bacteria selected as starter based on milk clotting ability, antimicrobial activity against various pathogens, tolerance in artificial gastric and bile juice and growth in 10 % skimmed milk. The strains were identified as Lacobacillus plantarum (KM32) and Pediococcus pentosacesus (KM24) by 16S rRNA gene sequencing. Viable cell number of yogurt fermented with mixed strains (KM24 and KM32) was 9.66 log CFU/mL after fermentation for 48 h and maintained $10^9CFU/mL$ during fermentation for 72 h at $37^{\circ}C$. The pH and titratable acidity of mixed cultured yogurt were 4.25% and 0.83% after fermentation for 48 h at $37^{\circ}C$, respectively. The physico-chemical characteristics of mixed cultured yogurt after fermentation for 48 h were $38.45{\mu}g/mL$ (polyphenol content), 48.57% (DPPH radical scavenging activity) and 465.40 cp (viscosity), respectively. The mixed cultured yogurt maintained $10^9CFU/mL$ of lactic acid bacteria during storage 10 days at $4^{\circ}C$. The viable cell number of yogurt prepared with mixed culture(KM32+KM24) maintained higher and than that of control (L. casei) during storage. These results indicated the potential use of selected strains (KM32+KM24) isolated from kimchi as a yogurt starter with strong acid tolerance and probiotics properties.

• Korean Journal of Agricultural Science
• /
• v.4 no.1
• /
• pp.51-60
• /
• 1977

In order to determine ecological variations of flowering date and yields under the different seasonal cultures, and to select the higher yielding varieties which were adaptable to Korean climate, 100 mungbean cultivars were sown at the interval of 15 days from April 22 to July 21 in 1976. The results obtained are summarized as follows: 1. The number of days required to flowering from seeding were decreased by delaying the seeding date. 2. When accumulated temperature at first flowering from seeding were reached $945-1,126^{\circ}C$, the mungbean cultivars started to flower regardless of seeding dates. Especially, when mungbean was planted around standard planting date, the plants flowered for very short duration. 3. There were highly significant correlations between the number of days from seeding to flowering at each seeding date and standard planting date. 4. Yields per plant were tend to decrease with the delay of seeding date but there were no significant difference between seeding dates. Therefore, it appears that mungbean can be planted for longer period of time compared to other crops such as rice and soybean. 5. Highly significant correlations were found between the number of days of first flowering and yields per plant at most seeding dates. 6. It may be feasible to grow high yielding mungbean cultivars such as CES 140, LM 2100, LM 690, L 576 and LM 689 after harvesting of spring vegetables in May and before planting of fall vegetables.

• Journal of Life Science
• /
• v.20 no.3
• /
• pp.424-429
• /
• 2010

Prunus mume is rich in organic acid, and excels in antioxidant activity. However, development of processed foods using Prunus mume is very limited, and characteristics of its products are different according to the region they are processed in. In this study, we collected 13 kinds of sugar-preserved Prunus mume home-made products in Hadong, and investigated their physical and manufacturing characteristics to select a superior product. 5 kinds of sugar-preserved Prunus mume products were selected according to results of sensory evaluation, and the overall acceptability of product No.13 was superior. Moisture contents of the 5 samples ranged from 45.2~53.3%, and pH and acidity showed similar values at about 2.8 and 0.4%, respectively. Sugar content of product No.13 were slightly lower than other products. Crude protein and lipid contents were similar at about 0.4 and 0.5%, respectively. Hardness value of product No.13, selected by its texture in sensory evaluation, was higher than others. The main components of organic acids were oxalic, malic, citric and fumaric acid, and citric acid content occupied more than 60% of total organic acid content. Also, the main components of free sugar were glucose and fructose.

• Journal of Wetlands Research
• /
• v.16 no.1
• /
• pp.19-32
• /
• 2014

The purpose of this paper is to obtain reliable rainfall data for runoff simulation and other hydrological analysis by the calibration of gauge rainfall. The calibrated gauge rainfall could be close to the actual value with rainfall on the ground. In order to analyze the wind effect of ground rain gauge, we selected the rain gauge sites with and without a windshield and standard rain gauge data from Chupungryeong weather station installed by standard of WMO. Simple linear regression model and artificial neural networks were used for the calibration of rainfalls, and we verified the reliability of the calibrated rainfalls through the runoff analysis using $Vflo^{TM}$. Rainfall calibrated by linear regression is higher amount of rainfall in 5%~18% than actual rainfall, and the wind remarkably affects the rainfall amount in the range of wind speed of 1.6~3.3m/s. It is hard to apply the linear regression model over 5.5m/s wind speed, because there is an insufficient wind speed data over 5.5m/s and there are also some outliers. On the other hand, rainfall calibrated by neural networks is estimated lower rainfall amount in 10~20% than actual rainfall. The results of the statistical evaluations are that neural networks model is more suitable for relatively big standard deviation and average rainfall. However, the linear regression model shows more suitable for extreme values. For getting more reliable rainfall data, we may need to select the suitable model for rainfall calibration. We expect the reliable hydrologic analysis could be performed by applying the calibration method suggested in this research.

• Korean Journal of Microbiology
• /
• v.41 no.1
• /
• pp.24-37
• /
• 2005

This study was conducted to analyze the molecular epidemiological properties and to select the most efficient and reliable PCR method on 116 of Staphylococcus aureus (S. aureus) isolates from Korean cattle, black goat, pig, dog, chicken, mouse and also human clinical cases from hospital. The distribution patterns of SSG [species specific genes; coagulase (coa), protein A (spa), nuclease (nuc) and aroA (RsaI) gene] were analyzed by PCR method. Among the SSGs, the nuc-gene was found in all strains $(100\%)$ tested and followed by coa-gene $(87.9\%)$, spa-gene $(91.4\%)$ and aroA-gene $(26.7\%)$, in order. The genetic subtyping by RFLP method was performed on the coa [AluI] and aroA-gene [RsaI] PCR products. The mecA-gene PCR and PCR-RFLP techniques were chosen to detect and verify of MRSA strains. Only the human strains $(12.1\%)$ were detected the positive mecA-gene products (533 bp), which were divided into two specific bands [201 & 332 bp] by HhaI enzyme digestion. On coa-gene and spa-gene typing, coa-gene was typed with ten kinds of genotype and coa-3 type were determined as the most predominant genotype, while spa-gene was divided into eleven kinds of genotype and also spa-7 type were selected the most prevalent genotype based on their genetic variations. On the aroA and coa-gene subtyping by PCR-RFLP, aroA-gene products were discriminated with only seven types of genotype, while coa-gene products were further divided into an eleven genotype, respectively. In comparison of SID values of five PCR based typing methods, the coa-PCR-RFLP (SID0.894) was evaluated the most efficient and reliable tools and followed by coa-PCR (SID0.883) and aroA-PCR-RFLP (SID0.462), in order. In conclusion, we could determined that the coa-PCR-RFLP method was the most suitable genetic analysis tool for S. aureus and MRSA strains from domestic animals and humans.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.12 no.2
• /
• pp.143-151
• /
• 2010

The impact of climate change on rice plants in Gangwon province was examined by comparing the climatic conditions during the recent 10 years (2000~2009) with those of normal (1971~2000) years, and by evaluating the rice plant responses. The daily mean air temperature increased by $0.5^{\circ}C$ while the daily range decreased by $0.1^{\circ}C$ as compared with the normal years. During the main rice growing period in field (from June to September) precipitation increased from 900 to 1,051mm and sunshine hours decreased from 704 to 619 hours. The respiration consumption effect during the rice growing period increased by 0.07 as a result of increased air temperature and reduced sunshine hours. The optimum heading date (determined by the mean air temperature for 40 days after the heading) was delayed in Chuncheon, Hongcheon, Wonju, and Gangneung compared with the normal. The maximum climatic yield potential based on mean temperature and sunshine hours for 40 days after the rice heading decreased by 94 kg/10a mainly due to the decrease in sunshine. The mean air temperature for 40 days after the rice heading from 1999 to 2009 in Chuncheon, Cheorwon, and Gangneung was generally above $22^{\circ}C$ implying that yield and quality of rice can be reduced. Therefore, it is necessary to delay the heading date by planting mid- to late-maturing varieties or by changing the transplanting date in order to produce high quality rice and to maintain rice productivity. In addition, it is also important to develop or select cultivars suitable to changing climate for each region in Gangwon province.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.1
• /
• pp.57-65
• /
• 2004

Introduction : The phantom that includes high density materials such as steel was custom-made to fix lung and bone in order to evaluation inhomogeneity correction at the time of conducting radiation therapy to treat lung cancer. Using this, values resulting from the inhomogeneous correction algorithm are compared on the 2 and 3 dimensional radiation therapy planning systems. Moreover, change in dose calculation was evaluated according to inhomogeneous by comparing with the actual measurement. Materials and Methods : As for the image acquisition, inhomogeneous correction phantom(Pig's vertebra, steel(8.21g/cm3), cork(0.23 g/cm3)) that was custom-made and the CT(Volume zoom, Siemens, Germany) were used. As for the radiation therapy planning system, Marks Plan(2D) and XiO(CMS, USA, 3D) were used. To compare with the measurement value, linear accelerator(CL/1800, Varian, USA) and ion chamber were used. Image, obtained from the CT was used to obtain point dose and dose distribution from the region of interest (ROI) while on the radiation therapy planning device. After measurement was conducted under the same conditions, value on the treatment planning device and measured value were subjected to comparison and analysis. And difference between the resulting for the evaluation on the use (or non-use) of inhomogeneity correction algorithm, and diverse inhomogeneity correction algorithm that is included in the radiation therapy planning device was compared as well. Results : As result of comparing the results of measurement value on the region of interest within the inhomogeneity correction phantom and the value that resulted from the homogeneous and inhomogeneous correction, gained from the therapy planning device, margin of error of the measurement value and inhomogeneous correction value at the location 1 of the lung showed $0.8\%$ on 2D and $0.5\%$ on 3D. Margin of error of the measurement value and inhomogeneous correction value at the location 1 of the steel showed $12\%$ on 2D and $5\%$ on 3D, however, it is possible to see that the value that is not correction and the margin of error of the measurement value stand at $16\%$ and $14\%$, respectively. Moreover, values of the 3D showed lower margin of error compared to 2D. Conclusion : Revision according to the density of tissue must be executed during radiation therapy planning. To ensure a more accurate planning, use of 3D planning system is recommended more so than the 2D Planning system to ensure a more accurate revision on the therapy plan. Moreover, 3D Planning system needs to select and use the most accurate and appropriate inhomogeneous correction algorithm through actual measurement. In addition, comparison and analysis through TLD or film dosimetry are needed.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.279-306
• /
• 2015

This paper is a study of the changing nature of software for virtual Cyborg self and the virtual body that occur in the game from a philosophical point of view. Looking broadly, the cyborg concept refers to the combination of man and machine. Specifically, there is a hardware cyborg organism to combine human and restoration of machine In addition, there is software cyborg by electronic the human brain of converting a virtual body. Virtual games are cases software-Cyborg applied. In the game , There seems to have characteristics of virtual body and ego that different from general cyborg meaning. To analyze the features, I applied the concept of software-cyborg of Hans morabek and the multiple selves in cyberspace properties of Kim Sun-Hee. generally, software cyborg cloning the brain type tended to invalidate the body due to the nature of the virtual world. But If you look at third-person's view and the game character that made from real actors, it is pursuing the realism of photographic images and it stressed the need for a virtual body in order to maintain the psychological identity of the player. And, The game player crosses the eight characters to choose while completing the mission. This is a big role in the reality ego leads to the desired final ending with the selection and experience to be experienced as self-replication to multiple. These cyber multi-ego looks for an active and positive features compared to the multi-ego in the real world and highlights the advantages of the software cyborg. Game The characteristics of the final result varies depending on the selection of the player. The life and death of a friend is determined by the relationship between the characters friendship. In this case, the virtual self is empirically through trial and error, moral, and try to select the desired setting the standard for intuitive and self own choice. Also It can be fused to the knowledge of multiple selves as one step is formed by a high spiritual introspection. This process is a positive interpretation of the world and their own forms of mental reflection through self-overcoming human, Nietzsche is said that the process is Wibeomenswi.