• Steel and Composite Structures
• /
• 제21권1호
• /
• pp.93-107
• /
• 2016

Seismic fragility analysis is a probabilistic decision-making framework which is widely implemented for evaluating vulnerability of a building under earthquake loading. It requires ingredient named probabilistic model and commonly developed using statistics requiring collecting data in large quantities. Preparation of such a data-base is often costly and time-consuming. Therefore, in this paper, by developing generic seismic drift demand model for regular-multi-story steel moment resisting frames is tried to present a novel application of the probabilistic decision-making analysis to practical purposes. To this end, a demand model which is a linear function of intensity measure in logarithmic space is developed to predict overall maximum inter-story drift. Next, the model is coupled with a set of regression-based equations which are capable of directly estimating unknown statistical characteristics of the model parameters.To explicitly address uncertainties arise from randomness and lack of knowledge, the Bayesian regression inference is employed, when these relations are developed. The developed demand model is then employed in a Seismic Fragility Analysis (SFA) for two designed building. The accuracy of the results is also assessed by comparison with the results directly obtained from Incremental Dynamic analysis.

• Earthquakes and Structures
• /
• 제3권1호
• /
• pp.37-57
• /
• 2012

The behavior of beam-column joints in moment resisting frame structures is susceptible to damage caused by seismic effects due to poor performance of the joints. A good number of researches were carried out to understand the complex mechanism of RC joints considered in current seismic design codes. The traditional construction detailing of transverse reinforcement has resulted in serious joint failures during earthquakes. This paper introduces a new design philosophy involving the use of additional diagonal bars within the joint particularly suitable for low to medium seismic effects in earthquake zones. In this study, ten full-scale interior beam-column specimens were constructed with various additional reinforcement details and configurations. The results of the experiment showed that adding additional bars is a promising approach in reinforced concrete structures where earthquakes are eminent. In terms of overall cracking observation during the test, the specimens with additional bars (diagonal and straight) compared with the ones without them showed fewer cracks in the column. Furthermore, concrete confinement is certainly an important design measure as recommended by most international codes.

• Structural Engineering and Mechanics
• /
• 제66권6호
• /
• pp.749-759
• /
• 2018

Aiming at widely used high-pier bridges in Sichuan-Tibet Railway, this paper presents an investigation to design and evaluate the seismic vibration reduction effects of several measures, including viscous damper (VD), friction pendulum bearing (FPB), and tuned mass damper (TMD). Primarily, according to the detailed introduction of the concerned bridge structure, dynamic models of high-pier bridges with different seismic vibration reduction (SVR) measures are established. Further, the designs for these SVR measures are performed, and the optimal parameters of these measures are investigated. On this basis, the vibration reduction effects of these measures are analyzed and assessed subject to actual earthquake excitations in Wenchuan Earthquake (M=8.0), and the most appropriate SVR measure for high-pier bridges in Sichuan-Tibet Railway is determined at the end of the work. Results show that the height of pier does not obviously affect the performances of the concerned SVR measures. Comprehensively considering the vibration absorption performance, installation and maintenance of all the employed measures in this paper, TMD is the best one to absorb vibrations induced by earthquakes.

• Earthquakes and Structures
• /
• 제13권3호
• /
• pp.221-230
• /
• 2017

One of the important phases of probabilistic performance-based methodology is establishing appropriate probabilistic seismic demand models (PSDMs). These demand models relate ground motion intensity measures (IMs) to demand measures (DMs). The objective of this paper is selection of the optimal IMs in probabilistic seismic demand analysis (PSDA) of the RC high-rise buildings. In selection process features such as: efficiency, practically, proficiency and sufficiency are considered. RC high-rise buildings with core wall structural system are selected as a case study building class with the three characteristic heights: 20-storey, 30-storey and 40-storey. In order to determine the most optimal IMs, 720 nonlinear time-history analyses are conducted for 60 ground motion records with a wide range of magnitudes and distances to source, and for various soil types, thus taking into account uncertainties during ground motion selection. The non-linear 3D models of the case study buildings are constructed. A detailed regression analysis and statistical processing of results are performed and appropriate PSDMs for the RC high-rise building are derived. Analyzing a large number of results it are adopted conclusions on the optimality of individual ground motion IMs for the RC high-rise building.

• 한국방재안전학회논문집
• /
• 제13권3호
• /
• pp.1-14
• /
• 2020

본 연구는 국가산업단지 지진재난 안전관리 문제점 도출 및 개선방안 제시를 목적으로 수행되었다. 지진재난 안전관리 문제점을 조사하기 위하여 한국산업단지공단의 안전관리 운연현황 및 실무자 면담조사를 수행하였다. 또한, 전국 국가산업단지 28개소를 대상으로 내진설계 적용실태조사를 수행하였다. 상기 과정에서 도출된 문제점을 통합 정리한 후 전문가 의견 등을 반영하여 내진관련 법적규제 강화 등의 5가지 항목으로 분류된 개선방안을 제시하였다. 본 연구에서 제시한 개선방안은 향후 국가산업단지 내진성능 향상을 위한 정책수립 자료로 활용할 수 있을 것으로기대된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권6호
• /
• pp.77-83
• /
• 2019

원자력발전소에 지진격리장치를 설치하면 지진에 의한 하중을 지진격리장치가 담당하면서 설치 전보다 큰 변위가 발생하게 될 것으로 예상되며, 변위증가에 따라 일부 설비의 지진리스크가 증가될 가능성이 있다. 특히 지진격리된 구조물과 일반 구조물을 연결하는 설비인 배관 시스템의 경우 지진리스크가 크게 증가될 것으로 예상된다. 본 연구에서는 원자력발전소 배관 시스템의 취약부위인 강재 배관 Tee의 한계상태를 누수로 정의하고 면내반복가력시험을 수행하였다. 강재 배관 Tee의 모멘트와 변형각은 기존의 센서를 이용한 계측이 어려우므로 이미지 신호를 이용하여 측정하였다. 본 연구에서는 3인치 강재 배관 Tee의 모멘트와 변형각의 관계를 이용한 누수 선도 및 저주기 피로 곡선들을 제시하였다.

• Structural Engineering and Mechanics
• /
• 제40권4호
• /
• pp.453-469
• /
• 2011

A one-story, wooden-frame, intermediate-bay model with Dou-Gon designed according to the Building Standards of the Song Dynasty (A.D.960-1279), was tested on a unidirectional shaking table. The main objectives of this experimental study were to investigate the seismic performance of Chinese historic wooden structure under various base input intensities. El Centro wave (N-S), Taft wave and Lanzhou wave were selected as input excitations. 27 seismic geophones were instrumented to measure the real-time displacement, velocity and acceleration respectively. Dynamic characteristics, failure mode and hysteretic energy dissipation performance of the model are analyzed. Test results indicate that the nature period and damping ratio of the model increase with the increasing magnitude of earthquake excitation. The nature period of the model is within 0.5~0.6 s, the damping ratio is 3~4%. The maximum acceleration dynamic magnification factor is less than 1 and decreases as the input seismic power increases. The frictional slippage of Dou-Gon layers (corbel brackets) between beams and plates dissipates a certain amount of seismic energy, and so does the slippage between posts and plinths. The mortise-tenon joint of the timber frame dissipates most of the seismic energy. Therefore, it plays a significant part in shock absorption and isolation.

• Computers and Concrete
• /
• 제31권6호
• /
• pp.537-543
• /
• 2023

To study the seismic behavior of recycled aggregate concrete filled circular steel tube (RACFCST) frames, the seismic behavior experiment of RACFCST frame was carried out to measure the hysteresis curve, skeleton curve and other seismic behavior indexes. Moreover, based on the experimental study, a feasible numerical analysis model was established to analyze the finite element parameters of 8 RACFCST frame specimens, and the influence of different variation parameters on the seismic behavior index for RACFCST frame was revealed. The results showed that the skeleton curve of specimens under different axial compression ratios were divided into three stages: elastic stage, elastic-plastic stage and descending stage, and the descending stage was relatively stable, indicating that the specimen had stronger deformation capacity in the descending stage. With the increase of axial compression ratio, the peak bearing capacity of all specimens reduced gradually, and the reduction was less than 5%. With the decrease of beam-column linear stiffness ratio, the peak bearing capacity decreased gradually. With the decrease of yield bending moment ratio of beam-column, the peak bearing capacity decreased gradually, and the decreasing rate of peak bearing capacity gradually accelerated. In addition, compared with the axial compression ratio, the beam-column linear stiffness ratio and the yield bending moment ratio of beam-column had a more significant influence on the peak bearing capacity of RACFCST frame.

• 한국재난정보학회 논문집
• /
• 제19권4호
• /
• pp.882-896
• /
• 2023

연구목적: 국가산업단지 공장시설물이 보유한 내진설계의 잠재적 위험과 안전지도 및 점검의 미비점을 효과적으로 향상시킬 수 있는 안전관리 및 내진보강대책 마련을 목적으로 한다. 연구방법: 본 연구에서는 국가산업단지의 지진재난 대비 안전관리 현황 및 관리체계 등 지진재난 안전관리 전반에 관한 조사·분석을 통해 문제점 및 개선방안을 도출하였고, 국가산업단지 내 입주기업체 내진설계 실태조사를 실시하여 시설유형과 구조적 특성에 기반한 개선방안을 제시하였다. 연구결과: 결론적으로 국가산업단지 지진재난 대비 안전관리 및 내진보강에 대한 문제점을 정리하여 4가지 유형별(내진성능 평가 및 관련 제도 보완, 입주기업 및 지자체 권한, 내진보강 및 안전관리 지원대책, 조직의 역량강화)로 개선방안을 도출하였다. 결론: 이를 기반으로 국가산업단지 입주기업이 지진재난을 대비하여 추진해야 하는 내진보강 대책을 마련하였으며, 각 대책별 세부적인 방안을 제시하였다.

• 한국지진공학회논문집
• /
• 제10권4호
• /
• pp.1-13
• /
• 2006

지반의 동적 변형 특성인 전단파 속도$(V_s)$, 압축파 속도$(V_p)$, 그리고 그에 따른 포아송 비(v)는 내진 설계나 내진 성능 평가 외에도 구조물의 거동 평가에 필요한 매우 중요한 지반 정수이다. 지난 수십 년 동안 이러한 지반 정수를 효율적이고 정밀하게 측정하기 위하여, 여러 가지 공내 탄성파 시험 기법들이 개발 및 적용되어 왔다. 본 연구에서는 가장 신뢰성이 높은 현장 탄성파 기법인 크로스홀 탄성파 시험을 지반 동적 물성 획득 기법으로 선정하였다. 지하수위 존재 여부에 관계 없이 토사뿐만 아니라 암반을 대상으로 크로스홀 시험을 성공적으로 수행할 수 있도록, 연직 시추공 안에서 지반을 대상으로 횡방향 가진이 가능한 스프링식 발진 장치를 개발하고, 두 곳의 기존 항만 부두 부지와 신규 LNG 저장 시설 두 부지로 구성된 국내 세 지역을 대상으로 크로스홀 탄성파 시험을 실시하였다. 대상 부지에서의 개발 발진 장치 적용을 통한 크로스홀 시험으로부터 지표 부근 토사부터 하부 공학적 기반암 및 지진학적 기반암으로 구성된 암반까지의 깊이별 $V_s,\;V_p$ 및 v와 같은 지반 동적 특성을 매우 효율적으로 결정하였으며, 적용 대상 시설물인 기존 항만 부두 시설물의 내진 성능 평가 그리고 신규 LNG 저장 시설물의 내진 설계를 위한 근본 자료로 제시하였다.